From: <gregkh@linuxfoundation.org>
To: hui.wang@canonical.com, gregkh@linuxfoundation.org, tiwai@suse.de
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "ALSA: hda - Add keycode map for alc input device" has been added to the 4.3-stable tree
Date: Mon, 25 Jan 2016 13:49:27 -0800 [thread overview]
Message-ID: <145375856712649@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
ALSA: hda - Add keycode map for alc input device
to the 4.3-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
alsa-hda-add-keycode-map-for-alc-input-device.patch
and it can be found in the queue-4.3 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From c7b60a89516beb20a352ec85c73a8fccd5becf26 Mon Sep 17 00:00:00 2001
From: Hui Wang <hui.wang@canonical.com>
Date: Mon, 28 Dec 2015 11:35:25 +0800
Subject: ALSA: hda - Add keycode map for alc input device
From: Hui Wang <hui.wang@canonical.com>
commit c7b60a89516beb20a352ec85c73a8fccd5becf26 upstream.
Then users can remap the keycode from userspace. If without the remap,
the input device will pass KEY_MICMUTE to userspace, but in X11 layer,
it uses KEY_F20 rather than KEY_MICMUTE for XF86AudioMicMute. After
adding the keycode map, users can remap the keycode to any value users
want.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/pci/hda/patch_realtek.c | 19 ++++++++++++++++---
1 file changed, 16 insertions(+), 3 deletions(-)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -67,6 +67,10 @@ enum {
ALC_HEADSET_TYPE_OMTP,
};
+enum {
+ ALC_KEY_MICMUTE_INDEX,
+};
+
struct alc_customize_define {
unsigned int sku_cfg;
unsigned char port_connectivity;
@@ -123,6 +127,7 @@ struct alc_spec {
unsigned int pll_coef_idx, pll_coef_bit;
unsigned int coef0;
struct input_dev *kb_dev;
+ u8 alc_mute_keycode_map[1];
};
/*
@@ -3472,24 +3477,32 @@ static void gpio2_mic_hotkey_event(struc
/* GPIO2 just toggles on a keypress/keyrelease cycle. Therefore
send both key on and key off event for every interrupt. */
- input_report_key(spec->kb_dev, KEY_MICMUTE, 1);
+ input_report_key(spec->kb_dev, spec->alc_mute_keycode_map[ALC_KEY_MICMUTE_INDEX], 1);
input_sync(spec->kb_dev);
- input_report_key(spec->kb_dev, KEY_MICMUTE, 0);
+ input_report_key(spec->kb_dev, spec->alc_mute_keycode_map[ALC_KEY_MICMUTE_INDEX], 0);
input_sync(spec->kb_dev);
}
static int alc_register_micmute_input_device(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
+ int i;
spec->kb_dev = input_allocate_device();
if (!spec->kb_dev) {
codec_err(codec, "Out of memory (input_allocate_device)\n");
return -ENOMEM;
}
+
+ spec->alc_mute_keycode_map[ALC_KEY_MICMUTE_INDEX] = KEY_MICMUTE;
+
spec->kb_dev->name = "Microphone Mute Button";
spec->kb_dev->evbit[0] = BIT_MASK(EV_KEY);
- spec->kb_dev->keybit[BIT_WORD(KEY_MICMUTE)] = BIT_MASK(KEY_MICMUTE);
+ spec->kb_dev->keycodesize = sizeof(spec->alc_mute_keycode_map[0]);
+ spec->kb_dev->keycodemax = ARRAY_SIZE(spec->alc_mute_keycode_map);
+ spec->kb_dev->keycode = spec->alc_mute_keycode_map;
+ for (i = 0; i < ARRAY_SIZE(spec->alc_mute_keycode_map); i++)
+ set_bit(spec->alc_mute_keycode_map[i], spec->kb_dev->keybit);
if (input_register_device(spec->kb_dev)) {
codec_err(codec, "input_register_device failed\n");
Patches currently in stable-queue which might be from hui.wang@canonical.com are
queue-4.3/alsa-hda-add-keycode-map-for-alc-input-device.patch
queue-4.3/alsa-hda-add-mic-mute-hotkey-quirk-for-lenovo-thinkcentre-aio.patch
queue-4.3/alsa-hda-fix-headphone-noise-after-dell-xps-13-resume-back-from-s3.patch
queue-4.3/alsa-hda-fixing-speaker-noise-on-the-two-latest-thinkpad-models.patch
reply other threads:[~2016-01-25 21:49 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=145375856712649@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=hui.wang@canonical.com \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.