All of lore.kernel.org
 help / color / mirror / Atom feed
From: Guenter Roeck <patchwork@patchwork.roeck-us.net>
To: lm-sensors@vger.kernel.org
Subject: [lm-sensors] [PATCH v3 21/25] hwmon: (it87) Support disabling fan control for all pwm control and ch
Date: Wed, 27 Jan 2016 02:03:45 +0000	[thread overview]
Message-ID: <1453860229-23614-22-git-send-email-patchwork@patchwork.roeck-us.net> (raw)

From: Guenter Roeck <linux@roeck-us.net>

On/Off mode is only supported for pwm controls 0-2, and not supported at all for
IT8603E/IT8623E. For pwm controls 3-6 and for IT8603E/IT8623E, SmartGuardian mode
is always enabled. Use it and set the pwm value to the maximum if fan control
is disabled.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
 drivers/hwmon/it87.c | 52 +++++++++++++++++++++++++++++++---------------------
 1 file changed, 31 insertions(+), 21 deletions(-)

diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index 515c5cd1890b..f40d81a0a9fc 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -1030,18 +1030,19 @@ static SENSOR_DEVICE_ATTR(temp2_type, S_IRUGO | S_IWUSR, show_temp_type,
 static SENSOR_DEVICE_ATTR(temp3_type, S_IRUGO | S_IWUSR, show_temp_type,
 			  set_temp_type, 2);
 
-/* 3 Fans */
+/* 6 Fans */
 
 static int pwm_mode(const struct it87_data *data, int nr)
 {
-	int ctrl = data->fan_main_ctrl & BIT(nr);
+	if (data->type != it8603 && nr < 3 && !(data->fan_main_ctrl & BIT(nr)))
+		return 0;				/* Full speed */
+	if (data->pwm_ctrl[nr] & 0x80)
+		return 2;				/* Automatic mode */
+	if ((data->type = it8603 || nr >= 3) &&
+	    data->pwm_duty[nr] = pwm_to_reg(data, 0xff))
+		return 0;			/* Full speed */
 
-	if (ctrl = 0 && data->type != it8603)		/* Full speed */
-		return 0;
-	if (data->pwm_ctrl[nr] & 0x80)			/* Automatic mode */
-		return 2;
-	else						/* Manual mode */
-		return 1;
+	return 1;				/* Manual mode */
 }
 
 static ssize_t show_fan(struct device *dev, struct device_attribute *attr,
@@ -1242,21 +1243,30 @@ static ssize_t set_pwm_enable(struct device *dev, struct device_attribute *attr,
 			return -EINVAL;
 	}
 
-	/* IT8603E does not have on/off mode */
-	if (val = 0 && data->type = it8603)
-		return -EINVAL;
-
 	mutex_lock(&data->update_lock);
 
 	if (val = 0) {
-		int tmp;
-		/* make sure the fan is on when in on/off mode */
-		tmp = it87_read_value(data, IT87_REG_FAN_CTL);
-		it87_write_value(data, IT87_REG_FAN_CTL, tmp | BIT(nr));
-		/* set on/off mode */
-		data->fan_main_ctrl &= ~BIT(nr);
-		it87_write_value(data, IT87_REG_FAN_MAIN_CTRL,
-				 data->fan_main_ctrl);
+		if (nr < 3 && data->type != it8603) {
+			int tmp;
+			/* make sure the fan is on when in on/off mode */
+			tmp = it87_read_value(data, IT87_REG_FAN_CTL);
+			it87_write_value(data, IT87_REG_FAN_CTL, tmp | BIT(nr));
+			/* set on/off mode */
+			data->fan_main_ctrl &= ~BIT(nr);
+			it87_write_value(data, IT87_REG_FAN_MAIN_CTRL,
+					 data->fan_main_ctrl);
+		} else {
+			/* No on/off mode, set maximum pwm value */
+			data->pwm_duty[nr] = pwm_to_reg(data, 0xff);
+			it87_write_value(data, IT87_REG_PWM_DUTY[nr],
+					 data->pwm_duty[nr]);
+			/* and set manual mode */
+			data->pwm_ctrl[nr] = has_newer_autopwm(data) ?
+					     data->pwm_temp_map[nr] :
+					     data->pwm_duty[nr];
+			it87_write_value(data, IT87_REG_PWM[nr],
+					 data->pwm_ctrl[nr]);
+		}
 	} else {
 		if (val = 1)				/* Manual mode */
 			data->pwm_ctrl[nr] = has_newer_autopwm(data) ?
@@ -1266,7 +1276,7 @@ static ssize_t set_pwm_enable(struct device *dev, struct device_attribute *attr,
 			data->pwm_ctrl[nr] = 0x80 | data->pwm_temp_map[nr];
 		it87_write_value(data, IT87_REG_PWM[nr], data->pwm_ctrl[nr]);
 
-		if (data->type != it8603) {
+		if (data->type != it8603 && nr < 3) {
 			/* set SmartGuardian mode */
 			data->fan_main_ctrl |= BIT(nr);
 			it87_write_value(data, IT87_REG_FAN_MAIN_CTRL,
-- 
2.1.4


_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

                 reply	other threads:[~2016-01-27  2:03 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1453860229-23614-22-git-send-email-patchwork@patchwork.roeck-us.net \
    --to=patchwork@patchwork.roeck-us.net \
    --cc=lm-sensors@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.