From: Guenter Roeck <patchwork@patchwork.roeck-us.net>
To: lm-sensors@vger.kernel.org
Subject: [lm-sensors] [PATCH v3 22/25] hwmon: (it87) Enhance validation for fan4 and fan5
Date: Wed, 27 Jan 2016 02:03:46 +0000 [thread overview]
Message-ID: <1453860229-23614-23-git-send-email-patchwork@patchwork.roeck-us.net> (raw)
From: Guenter Roeck <linux@roeck-us.net>
Several of the chips supported by this driver have a configuration
register to enable fan4 and fan5. Use those registers to determine
if fan4 and fan5 tachometers are supported.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
---
drivers/hwmon/it87.c | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index f40d81a0a9fc..5adb269918fb 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -2415,6 +2415,29 @@ static int __init it87_find(int sioaddr, unsigned short *address,
superio_select(sioaddr, GPIO);
+ /* Check for fan4, fan5 */
+ if (has_five_fans(config)) {
+ reg = superio_inb(sioaddr, IT87_SIO_GPIO2_REG);
+ switch (sio_data->type) {
+ case it8718:
+ if (reg & BIT(5))
+ sio_data->skip_fan |= BIT(3);
+ if (reg & BIT(4))
+ sio_data->skip_fan |= BIT(4);
+ break;
+ case it8720:
+ case it8721:
+ case it8728:
+ if (!(reg & BIT(5)))
+ sio_data->skip_fan |= BIT(3);
+ if (!(reg & BIT(4)))
+ sio_data->skip_fan |= BIT(4);
+ break;
+ default:
+ break;
+ }
+ }
+
reg = superio_inb(sioaddr, IT87_SIO_GPIO3_REG);
if (!sio_data->skip_vid) {
/* We need at least 4 VID pins */
--
2.1.4
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
reply other threads:[~2016-01-27 2:03 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1453860229-23614-23-git-send-email-patchwork@patchwork.roeck-us.net \
--to=patchwork@patchwork.roeck-us.net \
--cc=lm-sensors@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.