From: <gregkh@linuxfoundation.org>
To: mikey@neuling.org, gregkh@linuxfoundation.org, mpe@ellerman.id.au
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "powerpc/tm: Block signal return setting invalid MSR state" has been added to the 4.3-stable tree
Date: Tue, 26 Jan 2016 22:56:09 -0800 [thread overview]
Message-ID: <145387776998186@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
powerpc/tm: Block signal return setting invalid MSR state
to the 4.3-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
powerpc-tm-block-signal-return-setting-invalid-msr-state.patch
and it can be found in the queue-4.3 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From d2b9d2a5ad5ef04ff978c9923d19730cb05efd55 Mon Sep 17 00:00:00 2001
From: Michael Neuling <mikey@neuling.org>
Date: Thu, 19 Nov 2015 15:44:44 +1100
Subject: powerpc/tm: Block signal return setting invalid MSR state
From: Michael Neuling <mikey@neuling.org>
commit d2b9d2a5ad5ef04ff978c9923d19730cb05efd55 upstream.
Currently we allow both the MSR T and S bits to be set by userspace on
a signal return. Unfortunately this is a reserved configuration and
will cause a TM Bad Thing exception if attempted (via rfid).
This patch checks for this case in both the 32 and 64 bit signals
code. If both T and S are set, we mark the context as invalid.
Found using a syscall fuzzer.
Fixes: 2b0a576d15e0 ("powerpc: Add new transactional memory state to the signal context")
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/powerpc/include/asm/reg.h | 1 +
arch/powerpc/kernel/signal_32.c | 14 +++++++++-----
arch/powerpc/kernel/signal_64.c | 4 ++++
3 files changed, 14 insertions(+), 5 deletions(-)
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -108,6 +108,7 @@
#define MSR_TS_T __MASK(MSR_TS_T_LG) /* Transaction Transactional */
#define MSR_TS_MASK (MSR_TS_T | MSR_TS_S) /* Transaction State bits */
#define MSR_TM_ACTIVE(x) (((x) & MSR_TS_MASK) != 0) /* Transaction active? */
+#define MSR_TM_RESV(x) (((x) & MSR_TS_MASK) == MSR_TS_MASK) /* Reserved */
#define MSR_TM_TRANSACTIONAL(x) (((x) & MSR_TS_MASK) == MSR_TS_T)
#define MSR_TM_SUSPENDED(x) (((x) & MSR_TS_MASK) == MSR_TS_S)
--- a/arch/powerpc/kernel/signal_32.c
+++ b/arch/powerpc/kernel/signal_32.c
@@ -875,6 +875,15 @@ static long restore_tm_user_regs(struct
return 1;
#endif /* CONFIG_SPE */
+ /* Get the top half of the MSR from the user context */
+ if (__get_user(msr_hi, &tm_sr->mc_gregs[PT_MSR]))
+ return 1;
+ msr_hi <<= 32;
+ /* If TM bits are set to the reserved value, it's an invalid context */
+ if (MSR_TM_RESV(msr_hi))
+ return 1;
+ /* Pull in the MSR TM bits from the user context */
+ regs->msr = (regs->msr & ~MSR_TS_MASK) | (msr_hi & MSR_TS_MASK);
/* Now, recheckpoint. This loads up all of the checkpointed (older)
* registers, including FP and V[S]Rs. After recheckpointing, the
* transactional versions should be loaded.
@@ -884,11 +893,6 @@ static long restore_tm_user_regs(struct
current->thread.tm_texasr |= TEXASR_FS;
/* This loads the checkpointed FP/VEC state, if used */
tm_recheckpoint(¤t->thread, msr);
- /* Get the top half of the MSR */
- if (__get_user(msr_hi, &tm_sr->mc_gregs[PT_MSR]))
- return 1;
- /* Pull in MSR TM from user context */
- regs->msr = (regs->msr & ~MSR_TS_MASK) | ((msr_hi<<32) & MSR_TS_MASK);
/* This loads the speculative FP/VEC state, if used */
if (msr & MSR_FP) {
--- a/arch/powerpc/kernel/signal_64.c
+++ b/arch/powerpc/kernel/signal_64.c
@@ -438,6 +438,10 @@ static long restore_tm_sigcontexts(struc
/* get MSR separately, transfer the LE bit if doing signal return */
err |= __get_user(msr, &sc->gp_regs[PT_MSR]);
+ /* Don't allow reserved mode. */
+ if (MSR_TM_RESV(msr))
+ return -EINVAL;
+
/* pull in MSR TM from user context */
regs->msr = (regs->msr & ~MSR_TS_MASK) | (msr & MSR_TS_MASK);
Patches currently in stable-queue which might be from mikey@neuling.org are
queue-4.3/powerpc-tm-check-for-already-reclaimed-tasks.patch
queue-4.3/powerpc-tm-block-signal-return-setting-invalid-msr-state.patch
reply other threads:[~2016-01-27 7:00 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=145387776998186@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=mikey@neuling.org \
--cc=mpe@ellerman.id.au \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.