All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Zanoni, Paulo R" <paulo.r.zanoni@intel.com>
To: "intel-gfx@lists.freedesktop.org"
	<intel-gfx@lists.freedesktop.org>,
	"Vivi, Rodrigo" <rodrigo.vivi@intel.com>
Cc: "Nikula, Jani" <jani.nikula@intel.com>,
	"daniel.vetter@ffwll.ch" <daniel.vetter@ffwll.ch>
Subject: Re: [PATCH 3/3] drm/i915: Instrument PSR parameter for debuging with link standby x link off.
Date: Mon, 1 Feb 2016 19:47:38 +0000	[thread overview]
Message-ID: <1454356058.2538.16.camel@intel.com> (raw)
In-Reply-To: <1454352549-2411-4-git-send-email-rodrigo.vivi@intel.com>

Em Seg, 2016-02-01 às 10:49 -0800, Rodrigo Vivi escreveu:
> Unfortunately we don't know all panels and platforms out there and we
> found internal prototypes without VBT proper set but where only
> link in standby worked well.
> 
> So, before enable PSR by default let's instrument the PSR parameter
> in a way that we can identify different panels out there that might
> require or work better with link standby mode.
> 
> It is also useful to say that for backward compatibility I'm not
> changing the meaning of this flag. So "0" still means disabled
> and "1" means enabled with full support and maximum power savings.
> 
> v2: Use positive value instead of negative for different operation
> mode
>     as suggested by Daniel.
> 
> v3: As Paulo suggested use 2 to force link standby and 3 to force
> link
>     fully on. Also split the link_standby introduction in a separated
> patch.
> 
> v4: Use DRM_ERROR for link off request on platfors that don't support
> and
>     Remove the quirk promisse.

"platforms" and "promise"

For the 3 patches:
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>

> 
> Cc: Jani Nikula <jani.nikula@intel.com>
> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
> Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
> ---
>  drivers/gpu/drm/i915/i915_params.c |  3 ++-
>  drivers/gpu/drm/i915/intel_psr.c   | 17 +++++++++++++++++
>  2 files changed, 19 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/i915/i915_params.c
> b/drivers/gpu/drm/i915/i915_params.c
> index 8d90c25..8b9f368 100644
> --- a/drivers/gpu/drm/i915/i915_params.c
> +++ b/drivers/gpu/drm/i915/i915_params.c
> @@ -127,7 +127,8 @@ MODULE_PARM_DESC(enable_execlists,
>  	"(-1=auto [default], 0=disabled, 1=enabled)");
>  
>  module_param_named_unsafe(enable_psr, i915.enable_psr, int, 0600);
> -MODULE_PARM_DESC(enable_psr, "Enable PSR (default: false)");
> +MODULE_PARM_DESC(enable_psr, "Enable PSR "
> +		 "(0=disabled [default], 1=enabled - link mode
> chosen per-platform, 2=force link-standby mode, 3=force link-off
> mode)");
>  
>  module_param_named_unsafe(preliminary_hw_support,
> i915.preliminary_hw_support, int, 0600);
>  MODULE_PARM_DESC(preliminary_hw_support,
> diff --git a/drivers/gpu/drm/i915/intel_psr.c
> b/drivers/gpu/drm/i915/intel_psr.c
> index b99a105..4ab7579 100644
> --- a/drivers/gpu/drm/i915/intel_psr.c
> +++ b/drivers/gpu/drm/i915/intel_psr.c
> @@ -329,6 +329,12 @@ static bool intel_psr_match_conditions(struct
> intel_dp *intel_dp)
>  		return false;
>  	}
>  
> +	if ((IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) &&
> +	    !dev_priv->psr.link_standby) {
> +		DRM_ERROR("PSR condition failed: Link off requested
> but not supported on this platform\n");
> +		return false;
> +	}
> +
>  	if (IS_HASWELL(dev) &&
>  	    I915_READ(HSW_STEREO_3D_CTL(intel_crtc->config-
> >cpu_transcoder)) &
>  		      S3D_ENABLE) {
> @@ -772,6 +778,7 @@ void intel_psr_init(struct drm_device *dev)
>  	dev_priv->psr_mmio_base = IS_HASWELL(dev_priv) ?
>  		HSW_EDP_PSR_BASE : BDW_EDP_PSR_BASE;
>  
> +	/* Set link_standby x link_off defaults */
>  	if (IS_HASWELL(dev) || IS_BROADWELL(dev))
>  		/* HSW and BDW require workarounds that we don't
> implement. */
>  		dev_priv->psr.link_standby = false;
> @@ -782,6 +789,16 @@ void intel_psr_init(struct drm_device *dev)
>  		/* For new platforms let's respect VBT back again */
>  		dev_priv->psr.link_standby = dev_priv-
> >vbt.psr.full_link;
>  
> +	/* Override link_standby x link_off defaults */
> +	if (i915.enable_psr == 2 && !dev_priv->psr.link_standby) {
> +		DRM_DEBUG_KMS("PSR: Forcing link standby\n");
> +		dev_priv->psr.link_standby = true;
> +	}
> +	if (i915.enable_psr == 3 && dev_priv->psr.link_standby) {
> +		DRM_DEBUG_KMS("PSR: Forcing main link off\n");
> +		dev_priv->psr.link_standby = false;
> +	}
> +
>  	INIT_DELAYED_WORK(&dev_priv->psr.work, intel_psr_work);
>  	mutex_init(&dev_priv->psr.lock);
>  }
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2016-02-01 19:47 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-02-01 18:49 [PATCH 0/3] PSR link standby x link force off changes Rodrigo Vivi
2016-02-01 18:49 ` [PATCH 1/3] drm/i915: PSR simplify port and link standby checks Rodrigo Vivi
2016-02-01 18:49 ` [PATCH 2/3] drm/i915: Add PSR main link standby support back Rodrigo Vivi
2016-02-01 18:49 ` [PATCH 3/3] drm/i915: Instrument PSR parameter for debuging with link standby x link off Rodrigo Vivi
2016-02-01 19:47   ` Zanoni, Paulo R [this message]
2016-02-02  7:31 ` ✗ Fi.CI.BAT: failure for PSR link standby x link force off changes Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1454356058.2538.16.camel@intel.com \
    --to=paulo.r.zanoni@intel.com \
    --cc=daniel.vetter@ffwll.ch \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=jani.nikula@intel.com \
    --cc=rodrigo.vivi@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.