From: Yaniv Gardi <ygardi@codeaurora.org>
To: robherring2@gmail.com, James.Bottomley@HansenPartnership.com,
pebolle@tiscali.nl, hch@infradead.org
Cc: linux-kernel@vger.kernel.org, linux-scsi@vger.kernel.org,
linux-arm-msm@vger.kernel.org, santoshsy@gmail.com,
linux-scsi-owner@vger.kernel.org, subhashj@codeaurora.org,
ygardi@codeaurora.org, Vinayak Holikatti <vinholikatti@gmail.com>,
"James E.J. Bottomley" <JBottomley@odin.com>,
"Martin K. Petersen" <martin.petersen@oracle.com>
Subject: [v4 06/14] scsi: ufs: disable vccq if it's not needed by UFS device
Date: Thu, 4 Feb 2016 12:36:12 +0200 [thread overview]
Message-ID: <1454582180-3823-7-git-send-email-ygardi@codeaurora.org> (raw)
In-Reply-To: <1454582180-3823-1-git-send-email-ygardi@codeaurora.org>
Some UFS devices don't require VCCQ rail for device operations hence
this change adds support to recognize such devices and remove vote for
the unused VCCQ rail.
Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org>
---
drivers/scsi/ufs/ufs.h | 1 +
drivers/scsi/ufs/ufshcd.c | 60 +++++++++++++++++++++++++++++++++++++++++++----
2 files changed, 57 insertions(+), 4 deletions(-)
diff --git a/drivers/scsi/ufs/ufs.h b/drivers/scsi/ufs/ufs.h
index 8dd608b..0a20912 100644
--- a/drivers/scsi/ufs/ufs.h
+++ b/drivers/scsi/ufs/ufs.h
@@ -501,6 +501,7 @@ struct ufs_vreg {
struct regulator *reg;
const char *name;
bool enabled;
+ bool unused;
int min_uV;
int max_uV;
int min_uA;
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 95db156..aa82b67 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -195,6 +195,7 @@ static int ufshcd_probe_hba(struct ufs_hba *hba);
static int __ufshcd_setup_clocks(struct ufs_hba *hba, bool on,
bool skip_ref_clk);
static int ufshcd_setup_clocks(struct ufs_hba *hba, bool on);
+static int ufshcd_set_vccq_rail_unused(struct ufs_hba *hba, bool unused);
static int ufshcd_uic_hibern8_exit(struct ufs_hba *hba);
static int ufshcd_uic_hibern8_enter(struct ufs_hba *hba);
static inline void ufshcd_add_delay_before_dme_cmd(struct ufs_hba *hba);
@@ -4593,6 +4594,12 @@ static int ufshcd_probe_hba(struct ufs_hba *hba)
goto out;
ufs_advertise_fixup_device(hba);
+
+ ret = ufshcd_set_vccq_rail_unused(hba,
+ (hba->dev_quirks & UFS_DEVICE_NO_VCCQ) ? true : false);
+ if (ret)
+ goto out;
+
/* UFS device is also active now */
ufshcd_set_ufs_dev_active(hba);
ufshcd_force_reset_auto_bkops(hba);
@@ -4743,13 +4750,24 @@ static int ufshcd_config_vreg_load(struct device *dev, struct ufs_vreg *vreg,
static inline int ufshcd_config_vreg_lpm(struct ufs_hba *hba,
struct ufs_vreg *vreg)
{
- return ufshcd_config_vreg_load(hba->dev, vreg, UFS_VREG_LPM_LOAD_UA);
+ if (!vreg)
+ return 0;
+ else if (vreg->unused)
+ return 0;
+ else
+ return ufshcd_config_vreg_load(hba->dev, vreg,
+ UFS_VREG_LPM_LOAD_UA);
}
static inline int ufshcd_config_vreg_hpm(struct ufs_hba *hba,
struct ufs_vreg *vreg)
{
- return ufshcd_config_vreg_load(hba->dev, vreg, vreg->max_uA);
+ if (!vreg)
+ return 0;
+ else if (vreg->unused)
+ return 0;
+ else
+ return ufshcd_config_vreg_load(hba->dev, vreg, vreg->max_uA);
}
static int ufshcd_config_vreg(struct device *dev,
@@ -4784,7 +4802,9 @@ static int ufshcd_enable_vreg(struct device *dev, struct ufs_vreg *vreg)
{
int ret = 0;
- if (!vreg || vreg->enabled)
+ if (!vreg)
+ goto out;
+ else if (vreg->enabled || vreg->unused)
goto out;
ret = ufshcd_config_vreg(dev, vreg, true);
@@ -4804,7 +4824,9 @@ static int ufshcd_disable_vreg(struct device *dev, struct ufs_vreg *vreg)
{
int ret = 0;
- if (!vreg || !vreg->enabled)
+ if (!vreg)
+ goto out;
+ else if (!vreg->enabled || vreg->unused)
goto out;
ret = regulator_disable(vreg->reg);
@@ -4910,6 +4932,36 @@ static int ufshcd_init_hba_vreg(struct ufs_hba *hba)
return 0;
}
+static int ufshcd_set_vccq_rail_unused(struct ufs_hba *hba, bool unused)
+{
+ int ret = 0;
+ struct ufs_vreg_info *info = &hba->vreg_info;
+
+ if (!info)
+ goto out;
+ else if (!info->vccq)
+ goto out;
+
+ if (unused) {
+ /* shut off the rail here */
+ ret = ufshcd_toggle_vreg(hba->dev, info->vccq, false);
+ /*
+ * Mark this rail as no longer used, so it doesn't get enabled
+ * later by mistake
+ */
+ if (!ret)
+ info->vccq->unused = true;
+ } else {
+ /*
+ * rail should have been already enabled hence just make sure
+ * that unused flag is cleared.
+ */
+ info->vccq->unused = false;
+ }
+out:
+ return ret;
+}
+
static int __ufshcd_setup_clocks(struct ufs_hba *hba, bool on,
bool skip_ref_clk)
{
--
1.8.5.2
--
QUALCOMM ISRAEL, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
next prev parent reply other threads:[~2016-02-04 10:36 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-04 10:36 [v4 00/14] add fixes, device quirks, error recovery, Yaniv Gardi
2016-02-04 10:36 ` [v4 01/14] scsi: ufs-qcom: add number of lanes per direction Yaniv Gardi
2016-02-04 10:36 ` Yaniv Gardi
2016-02-08 17:53 ` Rob Herring
2016-02-04 10:36 ` [v4 02/14] scsi: ufs: avoid spurious UFS host controller interrupts Yaniv Gardi
2016-02-04 10:36 ` [v4 03/14] scsi: ufs: implement scsi host timeout handler Yaniv Gardi
2016-02-04 10:36 ` [v4 04/14] scsi: ufs: verify hba controller hce reg value Yaniv Gardi
2016-02-04 10:36 ` [v4 05/14] scsi: ufs: separate device and host quirks Yaniv Gardi
2016-02-09 17:02 ` Winkler, Tomas
2016-02-28 13:37 ` ygardi
2016-02-04 10:36 ` Yaniv Gardi [this message]
2016-02-04 10:36 ` [v4 07/14] scsi: ufs: make error handling bit faster Yaniv Gardi
2016-02-04 10:36 ` [v4 08/14] scsi: ufs: add error recovery after DL NAC error Yaniv Gardi
2016-02-04 10:36 ` [v4 09/14] scsi: ufs: add retry for query descriptors Yaniv Gardi
2016-02-04 10:36 ` [v4 10/14] scsi: ufs: handle non spec compliant bkops behaviour by device Yaniv Gardi
2016-02-04 10:36 ` [v4 11/14] scsi: ufs: tune UniPro parameters to optimize hibern8 exit time Yaniv Gardi
2016-02-04 10:36 ` [v4 12/14] scsi: ufs: fix leakage during link off state Yaniv Gardi
2016-02-04 10:36 ` [v4 13/14] scsi: ufs: add device quirk delay before putting UFS rails in LPM Yaniv Gardi
2016-02-04 10:36 ` [v4 14/14] scsi: ufs-qcom: set PA_Local_TX_LCC_Enable before link startup Yaniv Gardi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1454582180-3823-7-git-send-email-ygardi@codeaurora.org \
--to=ygardi@codeaurora.org \
--cc=JBottomley@odin.com \
--cc=James.Bottomley@HansenPartnership.com \
--cc=hch@infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi-owner@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=pebolle@tiscali.nl \
--cc=robherring2@gmail.com \
--cc=santoshsy@gmail.com \
--cc=subhashj@codeaurora.org \
--cc=vinholikatti@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.