From: John Stultz <john.stultz@linaro.org>
To: lkml <linux-kernel@vger.kernel.org>
Cc: John Stultz <john.stultz@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Arnd Bergmann <arnd.bergmann@linaro.org>,
Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
Andy Gross <agross@codeaurora.org>,
Russell King <linux@arm.linux.org.uk>,
Vinay Simha BN <simhavcs@gmail.com>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Stephen Boyd <stephen.boyd@linaro.org>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org
Subject: [PATCH 2/2 v2] devicetree: Add DTS file to support the Nexus7 2013 (flo) device.
Date: Fri, 5 Feb 2016 11:21:05 -0800 [thread overview]
Message-ID: <1454700065-16256-1-git-send-email-john.stultz@linaro.org> (raw)
In-Reply-To: <CAL_JsqL1koD3OWM4-cqEOJUz-yuZuUeg1tmp6V39mPE0zrNPgg@mail.gmail.com>
This patch adds a dts file to support the Nexus7 2013
device. Its based off of the qcom-apq8064-ifc6410.dts
which is similar hardware.
Also includes some comments and context folded in
from Vinay Simha BN <simhavcs@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Arnd Bergmann <arnd.bergmann@linaro.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Andy Gross <agross@codeaurora.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Vinay Simha BN <simhavcs@gmail.com>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
---
v2: Fix dts/dtb typeo in makefile pointed out by Rob
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts | 276 +++++++++++++++++++++
2 files changed, 277 insertions(+)
create mode 100644 arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index a4a6d70..f6444be 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -524,6 +524,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-apq8064-cm-qs600.dtb \
qcom-apq8064-ifc6410.dtb \
qcom-apq8064-sony-xperia-yuga.dtb \
+ qcom-apq8064-asus-nexus7-flo.dtb \
qcom-apq8074-dragonboard.dtb \
qcom-apq8084-ifc6540.dtb \
qcom-apq8084-mtp.dtb \
diff --git a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
new file mode 100644
index 0000000..c535b3f
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts
@@ -0,0 +1,276 @@
+#include "qcom-apq8064-v2.0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+/ {
+ model = "Asus Nexus7(flo)";
+ compatible = "asus,nexus7-flo", "qcom,apq8064";
+
+ aliases {
+ serial0 = &gsbi7_serial;
+ serial1 = &gsbi6_serial;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ ext_3p3v: regulator-fixed@1 {
+ compatible = "regulator-fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "ext_3p3v";
+ regulator-type = "voltage";
+ startup-delay-us = <0>;
+ gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-boot-on;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ power {
+ label = "Power";
+ gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ gpio-key,wakeup;
+ };
+ volume_up {
+ label = "Volume Up";
+ gpios = <&pm8921_gpio 4 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+ volume_down {
+ label = "Volume Down";
+ gpios = <&pm8921_gpio 38 GPIO_ACTIVE_HIGH>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+ };
+
+ soc {
+ rpm@108000 {
+ regulators {
+ vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+ vin_lvs1_3_6-supply = <&pm8921_s4>;
+ vin_lvs4_5_7-supply = <&pm8921_s4>;
+
+
+ vdd_l24-supply = <&pm8921_s1>;
+ vdd_l25-supply = <&pm8921_s1>;
+ vin_lvs2-supply = <&pm8921_s1>;
+
+ vdd_l26-supply = <&pm8921_s7>;
+ vdd_l27-supply = <&pm8921_s7>;
+ vdd_l28-supply = <&pm8921_s7>;
+
+ vdd_ncp-supply = <&pm8921_l6>;
+
+ /* Buck SMPS */
+ s1 {
+ regulator-always-on;
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ qcom,switch-mode-frequency = <3200000>;
+ bias-pull-down;
+ };
+
+ /* msm otg HSUSB_VDDCX */
+ s3 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1150000>;
+ qcom,switch-mode-frequency = <4800000>;
+ };
+
+ /*
+ * msm_sdcc.1-sdc-vdd_io
+ * tabla2x-slim-CDC_VDDA_RX
+ * tabla2x-slim-CDC_VDDA_TX
+ * tabla2x-slim-CDC_VDD_CP
+ * tabla2x-slim-VDDIO_CDC
+ */
+ s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,switch-mode-frequency = <3200000>;
+ regulator-always-on;
+ };
+
+ s7 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ qcom,switch-mode-frequency = <3200000>;
+ };
+
+ /* mipi_dsi.1-dsi1_pll_vdda */
+ l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ /* msm_otg-HSUSB_3p3 */
+ l3 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ bias-pull-down;
+ };
+
+ /* msm_otg-HSUSB_1p8 */
+ l4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ bias-pull-down;
+ };
+
+ /* msm_sdcc.1-sdc_vdd */
+ l5 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-always-on;
+ bias-pull-down;
+ };
+
+ l6 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ /* mipi_dsi.1-dsi1_avdd */
+ l11 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ bias-pull-down;
+ };
+
+ /* pwm_power for backlight */
+ l17 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3600000>;
+ bias-pull-down;
+ };
+
+ /* camera, qdsp6 */
+ l23 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ bias-pull-down;
+ };
+
+ /*
+ * tabla2x-slim-CDC_VDDA_A_1P2V
+ * tabla2x-slim-VDDD_CDC_D
+ */
+ l25 {
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1250000>;
+ bias-pull-down;
+ };
+
+ lvs1 {
+ bias-pull-down;
+ };
+
+ lvs4 {
+ bias-pull-down;
+ };
+
+ lvs5 {
+ bias-pull-down;
+ };
+
+ lvs6 {
+ bias-pull-down;
+ };
+ /*
+ * mipi_dsi.1-dsi1_vddio
+ * pil_riva-pll_vdd
+ */
+ lvs7 {
+ bias-pull-down;
+ };
+ };
+ };
+
+ gsbi@16200000 {
+ status = "okay";
+ qcom,mode = <GSBI_PROT_I2C>;
+ i2c@16280000 {
+ status = "okay";
+ clock-frequency = <200000>;
+ pinctrl-0 = <&i2c3_pins>;
+ pinctrl-names = "default";
+
+ trackpad@10 {
+ compatible = "elan,ekth3500";
+ reg = <0x10>;
+ interrupt-parent = <&tlmm_pinmux>;
+ interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+ };
+ };
+ };
+
+
+ gsbi@12440000 {
+ status = "okay";
+ qcom,mode = <GSBI_PROT_I2C>;
+
+ i2c@12460000 {
+ status = "okay";
+ clock-frequency = <200000>;
+ pinctrl-0 = <&i2c1_pins>;
+ pinctrl-names = "default";
+
+ eeprom@52 {
+ compatible = "atmel,24c128";
+ reg = <0x52>;
+ pagesize = <32>;
+ };
+ };
+ };
+
+ gsbi@16500000 {
+ status = "ok";
+ qcom,mode = <GSBI_PROT_I2C_UART>;
+
+ serial@16540000 {
+ status = "ok";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&gsbi6_uart_4pins>;
+ };
+ };
+
+ gsbi@16600000 {
+ status = "ok";
+ qcom,mode = <GSBI_PROT_I2C_UART>;
+ serial@16640000 {
+ status = "ok";
+ };
+ };
+
+ /* OTG */
+ phy@12500000 {
+ status = "okay";
+ vddcx-supply = <&pm8921_s3>;
+ v3p3-supply = <&pm8921_l3>;
+ v1p8-supply = <&pm8921_l4>;
+ };
+
+ gadget@12500000 {
+ status = "okay";
+ };
+
+ /* OTG */
+ usb@12500000 {
+ status = "okay";
+ };
+
+ amba {
+ /* eMMC */
+ sdcc@12400000 {
+ status = "okay";
+ vmmc-supply = <&pm8921_l5>;
+ vqmmc-supply = <&pm8921_s4>;
+ };
+ };
+ };
+};
--
1.9.1
next prev parent reply other threads:[~2016-02-05 19:21 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-05 18:06 [PATCH 1/2] devicetree: qcom-apq8064.dtsi: Add i2c3 address-cells and size-cells values John Stultz
2016-02-05 18:06 ` [PATCH 2/2] devicetree: Add DTS file to support the Nexus7 2013 (flo) device John Stultz
2016-02-05 19:01 ` Rob Herring
[not found] ` <CAL_JsqL1koD3OWM4-cqEOJUz-yuZuUeg1tmp6V39mPE0zrNPgg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-02-05 19:13 ` John Stultz
2016-02-05 19:13 ` John Stultz
2016-02-05 19:21 ` John Stultz [this message]
2016-02-13 5:16 ` [PATCH 2/2 v2] " John Stultz
2016-02-13 6:06 ` Bjorn Andersson
2016-02-13 22:32 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1454700065-16256-1-git-send-email-john.stultz@linaro.org \
--to=john.stultz@linaro.org \
--cc=agross@codeaurora.org \
--cc=arnd.bergmann@linaro.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=simhavcs@gmail.com \
--cc=stephen.boyd@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.