[PATCH v2 0/6] Add support for MICREL KSZ8795CLX 5-port switch

[Helmut Buchsbaum <helmut.buchsbaum@gmail.com>]

This patch series refactors the spi-ks8995 driver to finally add support
for the MICREL KSZ8795CLX. Additionally support for controlling a GPIO
line for resetting the switch is added.

Helmut

Changes since v1:
 - removed initializing registers from Device Tree following Florian's
   advice
 - fixed GPIO handling for reset according to Andrew's remark.

Helmut Buchsbaum (6):
  net: phy: spi_ks8995: introduce spi_device_id table
  net: phy: spi_ks8995: verify chip and determine revision
  net: phy: spi_ks8995: add support for resetting switch using GPIO
  net: phy: spi_ks8995: generalize creation of SPI commands
  net: phy: spi_ks8995: add support for MICREL KSZ8795CLX
  dt-bindings: net: ks8995: add bindings documentation for ks8995

 .../devicetree/bindings/net/micrel-ks8995.txt      |  20 ++
 drivers/net/phy/spi_ks8995.c                       | 304 +++++++++++++++++----
 2 files changed, 265 insertions(+), 59 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/micrel-ks8995.txt

-- 
2.1.4