From: <gregkh@linuxfoundation.org>
To: tj@kernel.org, akpm@linux-foundation.org, calvinowens@fb.com,
davej@codemonkey.org.uk, jack@suse.com, kyle@kernel.org,
stable@vger.kernel.org, torvalds@linux-foundation.org
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] printk: do cond_resched() between lines while outputting to" failed to apply to 4.3-stable tree
Date: Sat, 13 Feb 2016 14:34:46 -0800 [thread overview]
Message-ID: <145540288664168@kroah.com> (raw)
The patch below does not apply to the 4.3-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
>From 8d91f8b15361dfb438ab6eb3b319e2ded43458ff Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Fri, 15 Jan 2016 16:58:24 -0800
Subject: [PATCH] printk: do cond_resched() between lines while outputting to
consoles
@console_may_schedule tracks whether console_sem was acquired through
lock or trylock. If the former, we're inside a sleepable context and
console_conditional_schedule() performs cond_resched(). This allows
console drivers which use console_lock for synchronization to yield
while performing time-consuming operations such as scrolling.
However, the actual console outputting is performed while holding
irq-safe logbuf_lock, so console_unlock() clears @console_may_schedule
before starting outputting lines. Also, only a few drivers call
console_conditional_schedule() to begin with. This means that when a
lot of lines need to be output by console_unlock(), for example on a
console registration, the task doing console_unlock() may not yield for
a long time on a non-preemptible kernel.
If this happens with a slow console devices, for example a serial
console, the outputting task may occupy the cpu for a very long time.
Long enough to trigger softlockup and/or RCU stall warnings, which in
turn pile more messages, sometimes enough to trigger the next cycle of
warnings incapacitating the system.
Fix it by making console_unlock() insert cond_resched() between lines if
@console_may_schedule.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Calvin Owens <calvinowens@fb.com>
Acked-by: Jan Kara <jack@suse.com>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Kyle McMartin <kyle@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/include/linux/console.h b/include/linux/console.h
index bd194343c346..ea731af2451e 100644
--- a/include/linux/console.h
+++ b/include/linux/console.h
@@ -150,6 +150,7 @@ extern int console_trylock(void);
extern void console_unlock(void);
extern void console_conditional_schedule(void);
extern void console_unblank(void);
+extern void console_flush_on_panic(void);
extern struct tty_driver *console_device(int *);
extern void console_stop(struct console *);
extern void console_start(struct console *);
diff --git a/kernel/panic.c b/kernel/panic.c
index b333380c6bb2..d96469de72dc 100644
--- a/kernel/panic.c
+++ b/kernel/panic.c
@@ -180,8 +180,7 @@ void panic(const char *fmt, ...)
* panic() is not being callled from OOPS.
*/
debug_locks_off();
- console_trylock();
- console_unlock();
+ console_flush_on_panic();
if (!panic_blink)
panic_blink = no_blink;
diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c
index 0c9f02506169..08934a395c1a 100644
--- a/kernel/printk/printk.c
+++ b/kernel/printk/printk.c
@@ -2234,13 +2234,24 @@ void console_unlock(void)
static u64 seen_seq;
unsigned long flags;
bool wake_klogd = false;
- bool retry;
+ bool do_cond_resched, retry;
if (console_suspended) {
up_console_sem();
return;
}
+ /*
+ * Console drivers are called under logbuf_lock, so
+ * @console_may_schedule should be cleared before; however, we may
+ * end up dumping a lot of lines, for example, if called from
+ * console registration path, and should invoke cond_resched()
+ * between lines if allowable. Not doing so can cause a very long
+ * scheduling stall on a slow console leading to RCU stall and
+ * softlockup warnings which exacerbate the issue with more
+ * messages practically incapacitating the system.
+ */
+ do_cond_resched = console_may_schedule;
console_may_schedule = 0;
/* flush buffered message fragment immediately to console */
@@ -2312,6 +2323,9 @@ skip:
call_console_drivers(level, ext_text, ext_len, text, len);
start_critical_timings();
local_irq_restore(flags);
+
+ if (do_cond_resched)
+ cond_resched();
}
console_locked = 0;
@@ -2379,6 +2393,25 @@ void console_unblank(void)
console_unlock();
}
+/**
+ * console_flush_on_panic - flush console content on panic
+ *
+ * Immediately output all pending messages no matter what.
+ */
+void console_flush_on_panic(void)
+{
+ /*
+ * If someone else is holding the console lock, trylock will fail
+ * and may_schedule may be set. Ignore and proceed to unlock so
+ * that messages are flushed out. As this can be called from any
+ * context and we don't want to get preempted while flushing,
+ * ensure may_schedule is cleared.
+ */
+ console_trylock();
+ console_may_schedule = 0;
+ console_unlock();
+}
+
/*
* Return the console tty driver structure and its associated index
*/
reply other threads:[~2016-02-13 22:34 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=145540288664168@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=akpm@linux-foundation.org \
--cc=calvinowens@fb.com \
--cc=davej@codemonkey.org.uk \
--cc=jack@suse.com \
--cc=kyle@kernel.org \
--cc=stable@vger.kernel.org \
--cc=tj@kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.