From: Archit Taneja <architt@codeaurora.org>
To: robdclark@gmail.com
Cc: linux-arm-msm@vger.kernel.org, dri-devel@lists.freedesktop.org,
Archit Taneja <architt@codeaurora.org>
Subject: [PATCH v2 07/13] drm/msm/hdmi: Manage HDMI PLL through PHY driver
Date: Mon, 15 Feb 2016 12:23:20 +0530 [thread overview]
Message-ID: <1455519206-12939-8-git-send-email-architt@codeaurora.org> (raw)
In-Reply-To: <1455519206-12939-1-git-send-email-architt@codeaurora.org>
Add a helper to initialize PLL in the PHY driver. HDMI PLLs are going to
have their own mmio base different from that of PHY.
For the clock code in hdmi_phy_8960.c, some changes were needed for it to
work with the updated register offsets. Create a copy of the updated clock
code in hdmi_pll_8960.c, instead of rewriting it in hdmi_phy_8960.c
itself. This removes the need to place CONFIG_COMMON_CLOCK checks all
around, makes the code more legible, and also removes some old checkpatch
warnings with the original code.
The older hdmi pll clock ops in hdmi_phy_8960.c will be removed later. The
driver will use these until the HDMI PHY/PLL register offsets aren't
considered as separate domains (i.e. their offsets start from 0).
Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
drivers/gpu/drm/msm/hdmi/Makefile | 2 +
drivers/gpu/drm/msm/hdmi/hdmi.h | 9 +
drivers/gpu/drm/msm/hdmi/hdmi_phy.c | 35 +++
drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c | 461 +++++++++++++++++++++++++++++++
4 files changed, 507 insertions(+)
create mode 100644 drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c
diff --git a/drivers/gpu/drm/msm/hdmi/Makefile b/drivers/gpu/drm/msm/hdmi/Makefile
index aeb9329..9f2040c 100644
--- a/drivers/gpu/drm/msm/hdmi/Makefile
+++ b/drivers/gpu/drm/msm/hdmi/Makefile
@@ -2,3 +2,5 @@ ccflags-y := -Iinclude/drm -Idrivers/gpu/drm/msm
obj-y := hdmi.o hdmi_phy.o hdmi_audio.o hdmi_bridge.o hdmi_connector.o \
hdmi_hdcp.o hdmi_i2c.o hdmi_phy_8960.o hdmi_phy_8x60.o hdmi_phy_8x74.o
+
+obj-$(CONFIG_COMMON_CLK) += hdmi_pll_8960.o
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.h b/drivers/gpu/drm/msm/hdmi/hdmi.h
index 19eb1e0..29dc87a 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi.h
+++ b/drivers/gpu/drm/msm/hdmi/hdmi.h
@@ -199,6 +199,15 @@ void hdmi_phy_powerdown(struct hdmi_phy *phy);
void __init hdmi_phy_driver_register(void);
void __exit hdmi_phy_driver_unregister(void);
+#ifdef CONFIG_COMMON_CLK
+int hdmi_pll_8960_init(struct platform_device *pdev);
+#else
+int hdmi_pll_8960_init(struct platform_device *pdev);
+{
+ return -ENODEV;
+}
+#endif
+
/*
* audio:
*/
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_phy.c b/drivers/gpu/drm/msm/hdmi/hdmi_phy.c
index 184a061..54c4b37 100644
--- a/drivers/gpu/drm/msm/hdmi/hdmi_phy.c
+++ b/drivers/gpu/drm/msm/hdmi/hdmi_phy.c
@@ -118,6 +118,28 @@ void hdmi_phy_powerdown(struct hdmi_phy *phy)
phy->cfg->powerdown(phy);
}
+static int hdmi_phy_pll_init(struct platform_device *pdev,
+ enum hdmi_phy_type type)
+{
+ int ret;
+
+ switch (type) {
+ case MSM_HDMI_PHY_8960:
+ ret = hdmi_pll_8960_init(pdev);
+ break;
+ /*
+ * we don't have PLL support for these, don't report an error for now
+ */
+ case MSM_HDMI_PHY_8x60:
+ case MSM_HDMI_PHY_8x74:
+ default:
+ ret = 0;
+ break;
+ }
+
+ return ret;
+}
+
static int hdmi_phy_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -146,6 +168,19 @@ static int hdmi_phy_probe(struct platform_device *pdev)
pm_runtime_enable(&pdev->dev);
+ ret = hdmi_phy_resource_enable(phy);
+ if (ret)
+ return ret;
+
+ ret = hdmi_phy_pll_init(pdev, phy->cfg->type);
+ if (ret) {
+ dev_err(dev, "couldn't init PLL\n");
+ hdmi_phy_resource_disable(phy);
+ return ret;
+ }
+
+ hdmi_phy_resource_disable(phy);
+
platform_set_drvdata(pdev, phy);
return 0;
diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c b/drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c
new file mode 100644
index 0000000..35830a9
--- /dev/null
+++ b/drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c
@@ -0,0 +1,461 @@
+/*
+ * Copyright (c) 2016, The Linux Foundation. All rights reserved.
+ * Copyright (C) 2013 Red Hat
+ * Author: Rob Clark <robdclark@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/clk-provider.h>
+#include "hdmi.h"
+
+struct hdmi_pll_8960 {
+ struct platform_device *pdev;
+ struct clk_hw clk_hw;
+ void __iomem *mmio;
+
+ unsigned long pixclk;
+};
+
+#define hw_clk_to_pll(x) container_of(x, struct hdmi_pll_8960, clk_hw)
+
+/*
+ * HDMI PLL:
+ *
+ * To get the parent clock setup properly, we need to plug in hdmi pll
+ * configuration into common-clock-framework.
+ */
+
+struct pll_rate {
+ unsigned long rate;
+ int num_reg;
+ struct {
+ u32 val;
+ u32 reg;
+ } conf[32];
+};
+
+/* NOTE: keep sorted highest freq to lowest: */
+static const struct pll_rate freqtbl[] = {
+ { 154000000, 14, {
+ { 0x08, REG_HDMI_8960_PHY_PLL_REFCLK_CFG },
+ { 0x20, REG_HDMI_8960_PHY_PLL_LOOP_FLT_CFG0 },
+ { 0xf9, REG_HDMI_8960_PHY_PLL_LOOP_FLT_CFG1 },
+ { 0x02, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG0 },
+ { 0x03, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG1 },
+ { 0x3b, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG2 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG3 },
+ { 0x86, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG4 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG5 },
+ { 0x0d, REG_HDMI_8960_PHY_PLL_SDM_CFG0 },
+ { 0x4d, REG_HDMI_8960_PHY_PLL_SDM_CFG1 },
+ { 0x5e, REG_HDMI_8960_PHY_PLL_SDM_CFG2 },
+ { 0x42, REG_HDMI_8960_PHY_PLL_SDM_CFG3 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_SDM_CFG4 },
+ }
+ },
+ /* 1080p60/1080p50 case */
+ { 148500000, 27, {
+ { 0x02, REG_HDMI_8960_PHY_PLL_REFCLK_CFG },
+ { 0x02, REG_HDMI_8960_PHY_PLL_CHRG_PUMP_CFG },
+ { 0x01, REG_HDMI_8960_PHY_PLL_LOOP_FLT_CFG0 },
+ { 0x33, REG_HDMI_8960_PHY_PLL_LOOP_FLT_CFG1 },
+ { 0x2c, REG_HDMI_8960_PHY_PLL_IDAC_ADJ_CFG },
+ { 0x06, REG_HDMI_8960_PHY_PLL_I_VI_KVCO_CFG },
+ { 0x0a, REG_HDMI_8960_PHY_PLL_PWRDN_B },
+ { 0x76, REG_HDMI_8960_PHY_PLL_SDM_CFG0 },
+ { 0x01, REG_HDMI_8960_PHY_PLL_SDM_CFG1 },
+ { 0x4c, REG_HDMI_8960_PHY_PLL_SDM_CFG2 },
+ { 0xc0, REG_HDMI_8960_PHY_PLL_SDM_CFG3 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_SDM_CFG4 },
+ { 0x9a, REG_HDMI_8960_PHY_PLL_SSC_CFG0 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_SSC_CFG1 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_SSC_CFG2 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_SSC_CFG3 },
+ { 0x10, REG_HDMI_8960_PHY_PLL_LOCKDET_CFG0 },
+ { 0x1a, REG_HDMI_8960_PHY_PLL_LOCKDET_CFG1 },
+ { 0x0d, REG_HDMI_8960_PHY_PLL_LOCKDET_CFG2 },
+ { 0xe6, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG0 },
+ { 0x02, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG1 },
+ { 0x3b, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG2 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG3 },
+ { 0x86, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG4 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG5 },
+ { 0x33, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG6 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG7 },
+ }
+ },
+ { 108000000, 13, {
+ { 0x08, REG_HDMI_8960_PHY_PLL_REFCLK_CFG },
+ { 0x21, REG_HDMI_8960_PHY_PLL_LOOP_FLT_CFG0 },
+ { 0xf9, REG_HDMI_8960_PHY_PLL_LOOP_FLT_CFG1 },
+ { 0x1c, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG0 },
+ { 0x02, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG1 },
+ { 0x3b, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG2 },
+ { 0x86, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG4 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG5 },
+ { 0x49, REG_HDMI_8960_PHY_PLL_SDM_CFG0 },
+ { 0x49, REG_HDMI_8960_PHY_PLL_SDM_CFG1 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_SDM_CFG2 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_SDM_CFG3 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_SDM_CFG4 },
+ }
+ },
+ /* 720p60/720p50/1080i60/1080i50/1080p24/1080p30/1080p25 */
+ { 74250000, 8, {
+ { 0x0a, REG_HDMI_8960_PHY_PLL_PWRDN_B },
+ { 0x12, REG_HDMI_8960_PHY_PLL_REFCLK_CFG },
+ { 0x01, REG_HDMI_8960_PHY_PLL_LOOP_FLT_CFG0 },
+ { 0x33, REG_HDMI_8960_PHY_PLL_LOOP_FLT_CFG1 },
+ { 0x76, REG_HDMI_8960_PHY_PLL_SDM_CFG0 },
+ { 0xe6, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG0 },
+ { 0x02, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG1 },
+ { 0x3b, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG2 },
+ }
+ },
+ { 74176000, 14, {
+ { 0x18, REG_HDMI_8960_PHY_PLL_REFCLK_CFG },
+ { 0x20, REG_HDMI_8960_PHY_PLL_LOOP_FLT_CFG0 },
+ { 0xf9, REG_HDMI_8960_PHY_PLL_LOOP_FLT_CFG1 },
+ { 0xe5, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG0 },
+ { 0x02, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG1 },
+ { 0x3b, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG2 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG3 },
+ { 0x86, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG4 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG5 },
+ { 0x0c, REG_HDMI_8960_PHY_PLL_SDM_CFG0 },
+ { 0x4c, REG_HDMI_8960_PHY_PLL_SDM_CFG1 },
+ { 0x7d, REG_HDMI_8960_PHY_PLL_SDM_CFG2 },
+ { 0xbc, REG_HDMI_8960_PHY_PLL_SDM_CFG3 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_SDM_CFG4 },
+ }
+ },
+ { 65000000, 14, {
+ { 0x18, REG_HDMI_8960_PHY_PLL_REFCLK_CFG },
+ { 0x20, REG_HDMI_8960_PHY_PLL_LOOP_FLT_CFG0 },
+ { 0xf9, REG_HDMI_8960_PHY_PLL_LOOP_FLT_CFG1 },
+ { 0x8a, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG0 },
+ { 0x02, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG1 },
+ { 0x3b, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG2 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG3 },
+ { 0x86, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG4 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG5 },
+ { 0x0b, REG_HDMI_8960_PHY_PLL_SDM_CFG0 },
+ { 0x4b, REG_HDMI_8960_PHY_PLL_SDM_CFG1 },
+ { 0x7b, REG_HDMI_8960_PHY_PLL_SDM_CFG2 },
+ { 0x09, REG_HDMI_8960_PHY_PLL_SDM_CFG3 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_SDM_CFG4 },
+ }
+ },
+ /* 480p60/480i60 */
+ { 27030000, 18, {
+ { 0x0a, REG_HDMI_8960_PHY_PLL_PWRDN_B },
+ { 0x38, REG_HDMI_8960_PHY_PLL_REFCLK_CFG },
+ { 0x02, REG_HDMI_8960_PHY_PLL_CHRG_PUMP_CFG },
+ { 0x20, REG_HDMI_8960_PHY_PLL_LOOP_FLT_CFG0 },
+ { 0xff, REG_HDMI_8960_PHY_PLL_LOOP_FLT_CFG1 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_SDM_CFG0 },
+ { 0x4e, REG_HDMI_8960_PHY_PLL_SDM_CFG1 },
+ { 0xd7, REG_HDMI_8960_PHY_PLL_SDM_CFG2 },
+ { 0x03, REG_HDMI_8960_PHY_PLL_SDM_CFG3 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_SDM_CFG4 },
+ { 0x2a, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG0 },
+ { 0x03, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG1 },
+ { 0x3b, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG2 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG3 },
+ { 0x86, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG4 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG5 },
+ { 0x33, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG6 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG7 },
+ }
+ },
+ /* 576p50/576i50 */
+ { 27000000, 27, {
+ { 0x32, REG_HDMI_8960_PHY_PLL_REFCLK_CFG },
+ { 0x02, REG_HDMI_8960_PHY_PLL_CHRG_PUMP_CFG },
+ { 0x01, REG_HDMI_8960_PHY_PLL_LOOP_FLT_CFG0 },
+ { 0x33, REG_HDMI_8960_PHY_PLL_LOOP_FLT_CFG1 },
+ { 0x2c, REG_HDMI_8960_PHY_PLL_IDAC_ADJ_CFG },
+ { 0x06, REG_HDMI_8960_PHY_PLL_I_VI_KVCO_CFG },
+ { 0x0a, REG_HDMI_8960_PHY_PLL_PWRDN_B },
+ { 0x7b, REG_HDMI_8960_PHY_PLL_SDM_CFG0 },
+ { 0x01, REG_HDMI_8960_PHY_PLL_SDM_CFG1 },
+ { 0x4c, REG_HDMI_8960_PHY_PLL_SDM_CFG2 },
+ { 0xc0, REG_HDMI_8960_PHY_PLL_SDM_CFG3 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_SDM_CFG4 },
+ { 0x9a, REG_HDMI_8960_PHY_PLL_SSC_CFG0 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_SSC_CFG1 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_SSC_CFG2 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_SSC_CFG3 },
+ { 0x10, REG_HDMI_8960_PHY_PLL_LOCKDET_CFG0 },
+ { 0x1a, REG_HDMI_8960_PHY_PLL_LOCKDET_CFG1 },
+ { 0x0d, REG_HDMI_8960_PHY_PLL_LOCKDET_CFG2 },
+ { 0x2a, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG0 },
+ { 0x03, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG1 },
+ { 0x3b, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG2 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG3 },
+ { 0x86, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG4 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG5 },
+ { 0x33, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG6 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG7 },
+ }
+ },
+ /* 640x480p60 */
+ { 25200000, 27, {
+ { 0x32, REG_HDMI_8960_PHY_PLL_REFCLK_CFG },
+ { 0x02, REG_HDMI_8960_PHY_PLL_CHRG_PUMP_CFG },
+ { 0x01, REG_HDMI_8960_PHY_PLL_LOOP_FLT_CFG0 },
+ { 0x33, REG_HDMI_8960_PHY_PLL_LOOP_FLT_CFG1 },
+ { 0x2c, REG_HDMI_8960_PHY_PLL_IDAC_ADJ_CFG },
+ { 0x06, REG_HDMI_8960_PHY_PLL_I_VI_KVCO_CFG },
+ { 0x0a, REG_HDMI_8960_PHY_PLL_PWRDN_B },
+ { 0x77, REG_HDMI_8960_PHY_PLL_SDM_CFG0 },
+ { 0x4c, REG_HDMI_8960_PHY_PLL_SDM_CFG1 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_SDM_CFG2 },
+ { 0xc0, REG_HDMI_8960_PHY_PLL_SDM_CFG3 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_SDM_CFG4 },
+ { 0x9a, REG_HDMI_8960_PHY_PLL_SSC_CFG0 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_SSC_CFG1 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_SSC_CFG2 },
+ { 0x20, REG_HDMI_8960_PHY_PLL_SSC_CFG3 },
+ { 0x10, REG_HDMI_8960_PHY_PLL_LOCKDET_CFG0 },
+ { 0x1a, REG_HDMI_8960_PHY_PLL_LOCKDET_CFG1 },
+ { 0x0d, REG_HDMI_8960_PHY_PLL_LOCKDET_CFG2 },
+ { 0xf4, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG0 },
+ { 0x02, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG1 },
+ { 0x3b, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG2 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG3 },
+ { 0x86, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG4 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG5 },
+ { 0x33, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG6 },
+ { 0x00, REG_HDMI_8960_PHY_PLL_VCOCAL_CFG7 },
+ }
+ },
+};
+
+static inline void pll_write(struct hdmi_pll_8960 *pll, u32 reg, u32 data)
+{
+ msm_writel(data, pll->mmio + reg);
+}
+
+static inline u32 pll_read(struct hdmi_pll_8960 *pll, u32 reg)
+{
+ return msm_readl(pll->mmio + reg);
+}
+
+static inline struct hdmi_phy *pll_get_phy(struct hdmi_pll_8960 *pll)
+{
+ return platform_get_drvdata(pll->pdev);
+}
+
+static int hdmi_pll_enable(struct clk_hw *hw)
+{
+ struct hdmi_pll_8960 *pll = hw_clk_to_pll(hw);
+ struct hdmi_phy *phy = pll_get_phy(pll);
+ int timeout_count, pll_lock_retry = 10;
+ unsigned int val;
+
+ DBG("");
+
+ /* Assert PLL S/W reset */
+ pll_write(pll, REG_HDMI_8960_PHY_PLL_LOCKDET_CFG2, 0x8d);
+ pll_write(pll, REG_HDMI_8960_PHY_PLL_LOCKDET_CFG0, 0x10);
+ pll_write(pll, REG_HDMI_8960_PHY_PLL_LOCKDET_CFG1, 0x1a);
+
+ /* Wait for a short time before de-asserting
+ * to allow the hardware to complete its job.
+ * This much of delay should be fine for hardware
+ * to assert and de-assert.
+ */
+ udelay(10);
+
+ /* De-assert PLL S/W reset */
+ pll_write(pll, REG_HDMI_8960_PHY_PLL_LOCKDET_CFG2, 0x0d);
+
+ val = hdmi_phy_read(phy, REG_HDMI_8960_PHY_REG12);
+ val |= HDMI_8960_PHY_REG12_SW_RESET;
+ /* Assert PHY S/W reset */
+ hdmi_phy_write(phy, REG_HDMI_8960_PHY_REG12, val);
+ val &= ~HDMI_8960_PHY_REG12_SW_RESET;
+ /*
+ * Wait for a short time before de-asserting to allow the hardware to
+ * complete its job. This much of delay should be fine for hardware to
+ * assert and de-assert.
+ */
+ udelay(10);
+ /* De-assert PHY S/W reset */
+ hdmi_phy_write(phy, REG_HDMI_8960_PHY_REG12, val);
+ hdmi_phy_write(phy, REG_HDMI_8960_PHY_REG2, 0x3f);
+
+ val = hdmi_phy_read(phy, REG_HDMI_8960_PHY_REG12);
+ val |= HDMI_8960_PHY_REG12_PWRDN_B;
+ hdmi_phy_write(phy, REG_HDMI_8960_PHY_REG12, val);
+ /* Wait 10 us for enabling global power for PHY */
+ mb();
+ udelay(10);
+
+ val = pll_read(pll, REG_HDMI_8960_PHY_PLL_PWRDN_B);
+ val |= HDMI_8960_PHY_PLL_PWRDN_B_PLL_PWRDN_B;
+ val &= ~HDMI_8960_PHY_PLL_PWRDN_B_PD_PLL;
+ pll_write(pll, REG_HDMI_8960_PHY_PLL_PWRDN_B, val);
+ hdmi_phy_write(phy, REG_HDMI_8960_PHY_REG2, 0x80);
+
+ timeout_count = 1000;
+ while (--pll_lock_retry > 0) {
+ /* are we there yet? */
+ val = pll_read(pll, REG_HDMI_8960_PHY_PLL_STATUS0);
+ if (val & HDMI_8960_PHY_PLL_STATUS0_PLL_LOCK)
+ break;
+
+ udelay(1);
+
+ if (--timeout_count > 0)
+ continue;
+
+ /*
+ * PLL has still not locked.
+ * Do a software reset and try again
+ * Assert PLL S/W reset first
+ */
+ pll_write(pll, REG_HDMI_8960_PHY_PLL_LOCKDET_CFG2, 0x8d);
+ udelay(10);
+ pll_write(pll, REG_HDMI_8960_PHY_PLL_LOCKDET_CFG2, 0x0d);
+
+ /*
+ * Wait for a short duration for the PLL calibration
+ * before checking if the PLL gets locked
+ */
+ udelay(350);
+
+ timeout_count = 1000;
+ }
+
+ return 0;
+}
+
+static void hdmi_pll_disable(struct clk_hw *hw)
+{
+ struct hdmi_pll_8960 *pll = hw_clk_to_pll(hw);
+ struct hdmi_phy *phy = pll_get_phy(pll);
+ unsigned int val;
+
+ DBG("");
+
+ val = hdmi_phy_read(phy, REG_HDMI_8960_PHY_REG12);
+ val &= ~HDMI_8960_PHY_REG12_PWRDN_B;
+ hdmi_phy_write(phy, REG_HDMI_8960_PHY_REG12, val);
+
+ val = pll_read(pll, REG_HDMI_8960_PHY_PLL_PWRDN_B);
+ val |= HDMI_8960_PHY_REG12_SW_RESET;
+ val &= ~HDMI_8960_PHY_REG12_PWRDN_B;
+ pll_write(pll, REG_HDMI_8960_PHY_PLL_PWRDN_B, val);
+ /* Make sure HDMI PHY/PLL are powered down */
+ mb();
+}
+
+static const struct pll_rate *find_rate(unsigned long rate)
+{
+ int i;
+
+ for (i = 1; i < ARRAY_SIZE(freqtbl); i++)
+ if (rate > freqtbl[i].rate)
+ return &freqtbl[i - 1];
+
+ return &freqtbl[i - 1];
+}
+
+static unsigned long hdmi_pll_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct hdmi_pll_8960 *pll = hw_clk_to_pll(hw);
+
+ return pll->pixclk;
+}
+
+static long hdmi_pll_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ const struct pll_rate *pll_rate = find_rate(rate);
+
+ return pll_rate->rate;
+}
+
+static int hdmi_pll_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct hdmi_pll_8960 *pll = hw_clk_to_pll(hw);
+ const struct pll_rate *pll_rate = find_rate(rate);
+ int i;
+
+ DBG("rate=%lu", rate);
+
+ for (i = 0; i < pll_rate->num_reg; i++)
+ pll_write(pll, pll_rate->conf[i].reg, pll_rate->conf[i].val);
+
+ pll->pixclk = rate;
+
+ return 0;
+}
+
+static const struct clk_ops hdmi_pll_ops = {
+ .enable = hdmi_pll_enable,
+ .disable = hdmi_pll_disable,
+ .recalc_rate = hdmi_pll_recalc_rate,
+ .round_rate = hdmi_pll_round_rate,
+ .set_rate = hdmi_pll_set_rate,
+};
+
+static const char * const hdmi_pll_parents[] = {
+ "pxo",
+};
+
+static struct clk_init_data pll_init = {
+ .name = "hdmi_pll",
+ .ops = &hdmi_pll_ops,
+ .parent_names = hdmi_pll_parents,
+ .num_parents = ARRAY_SIZE(hdmi_pll_parents),
+};
+
+int hdmi_pll_8960_init(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct hdmi_pll_8960 *pll;
+ struct clk *clk;
+ int i;
+
+ /* sanity check: */
+ for (i = 0; i < (ARRAY_SIZE(freqtbl) - 1); i++)
+ if (WARN_ON(freqtbl[i].rate < freqtbl[i + 1].rate))
+ return -EINVAL;
+
+ pll = devm_kzalloc(dev, sizeof(*pll), GFP_KERNEL);
+ if (!pll)
+ return -ENOMEM;
+
+ pll->mmio = msm_ioremap(pdev, "hdmi_pll", "HDMI_PLL");
+ if (IS_ERR(pll->mmio)) {
+ dev_err(dev, "failed to map pll base\n");
+ return -ENOMEM;
+ }
+
+ pll->pdev = pdev;
+ pll->clk_hw.init = &pll_init;
+
+ clk = devm_clk_register(dev, &pll->clk_hw);
+ if (IS_ERR(clk)) {
+ dev_err(dev, "failed to register pll clock\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
next prev parent reply other threads:[~2016-02-15 6:54 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-15 6:53 [PATCH v2 00/13] drm/msm/hdmi: HDMI support on MSM8996 Archit Taneja
2016-02-15 6:53 ` [PATCH v2 01/13] drm/msm/dsi: Create separate Makefile/Kconfig Archit Taneja
2016-02-15 6:53 ` [PATCH v2 02/13] drm/msm/hdmi: " Archit Taneja
2016-02-15 6:53 ` [PATCH v2 03/13] drm/msm/edp: " Archit Taneja
2016-02-15 6:53 ` [PATCH v2 04/13] drm/msm/hdmi: Clean up connector gpio usage Archit Taneja
2016-02-15 6:53 ` [PATCH v2 05/13] drm/msm/hdmi: Fix connector detect when there is no HPD gpio Archit Taneja
2016-02-15 6:53 ` [PATCH v2 06/13] drm/msm/hdmi: Create a separate HDMI PHY driver Archit Taneja
2016-02-15 6:53 ` Archit Taneja [this message]
2016-02-15 6:53 ` [PATCH v2 08/13] drm/msm/hdmi: Make HDMI core get its PHY Archit Taneja
2016-02-15 6:53 ` [PATCH v2 09/13] drm/msm/hdmi: Convert PHY files according to new design Archit Taneja
2016-02-15 6:53 ` [PATCH v2 10/13] drm/msm/hdmi: Update generated headers to split PHY/PLL offsets Archit Taneja
2016-02-15 6:53 ` [PATCH v2 11/13] drm/msm/hdmi: Update generated headers for HDMI 8996 PHY Archit Taneja
2016-02-15 6:53 ` [PATCH v2 12/13] drm/msm/hdmi: HDMI 8996 PHY/PLL support Archit Taneja
2016-02-15 6:53 ` [PATCH v2 13/13] dt-bindings: msm/hdmi: Add HDMI PHY bindings Archit Taneja
2016-02-22 2:54 ` Rob Herring
2016-02-22 11:07 ` Archit Taneja
2016-02-22 19:27 ` Rob Herring
2016-02-23 9:36 ` Archit Taneja
2016-02-24 12:00 ` Kishon Vijay Abraham I
2016-02-25 5:40 ` Archit Taneja
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1455519206-12939-8-git-send-email-architt@codeaurora.org \
--to=architt@codeaurora.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=robdclark@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.