[PATCH 4/6] mempool: add autotest for external mempool custom example

[David Hunt <david.hunt@intel.com>]

Signed-off-by: David Hunt <david.hunt@intel.com>
---
 app/test/Makefile           |   1 +
 app/test/test_ext_mempool.c | 451 ++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 452 insertions(+)
 create mode 100644 app/test/test_ext_mempool.c

diff --git a/app/test/Makefile b/app/test/Makefile
index ec33e1a..9a2f75f 100644
--- a/app/test/Makefile
+++ b/app/test/Makefile
@@ -74,6 +74,7 @@ SRCS-$(CONFIG_RTE_LIBRTE_TIMER) += test_timer_perf.c
 SRCS-$(CONFIG_RTE_LIBRTE_TIMER) += test_timer_racecond.c
 
 SRCS-y += test_mempool.c
+SRCS-y += test_ext_mempool.c
 SRCS-y += test_mempool_perf.c
 
 SRCS-y += test_mbuf.c
diff --git a/app/test/test_ext_mempool.c b/app/test/test_ext_mempool.c
new file mode 100644
index 0000000..6beada0
--- /dev/null
+++ b/app/test/test_ext_mempool.c
@@ -0,0 +1,451 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <string.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdint.h>
+#include <inttypes.h>
+#include <stdarg.h>
+#include <errno.h>
+#include <sys/queue.h>
+
+#include <rte_common.h>
+#include <rte_log.h>
+#include <rte_debug.h>
+#include <rte_memory.h>
+#include <rte_memzone.h>
+#include <rte_launch.h>
+#include <rte_cycles.h>
+#include <rte_eal.h>
+#include <rte_per_lcore.h>
+#include <rte_lcore.h>
+#include <rte_atomic.h>
+#include <rte_branch_prediction.h>
+#include <rte_ring.h>
+#include <rte_mempool.h>
+#include <rte_spinlock.h>
+#include <rte_malloc.h>
+
+#include "test.h"
+
+/*
+ * Mempool
+ * =======
+ *
+ * Basic tests: done on one core with and without cache:
+ *
+ *    - Get one object, put one object
+ *    - Get two objects, put two objects
+ *    - Get all objects, test that their content is not modified and
+ *      put them back in the pool.
+ */
+
+#define TIME_S 5
+#define MEMPOOL_ELT_SIZE 2048
+#define MAX_KEEP 128
+#define MEMPOOL_SIZE 8192
+
+static struct rte_mempool *mp;
+static struct rte_mempool *ext_nocache, *ext_cache;
+
+static rte_atomic32_t synchro;
+
+/*
+ * For our tests, we use the following struct to pass info to our create
+ *  callback so it can call rte_mempool_create
+ */
+struct custom_mempool_alloc_params {
+	char ring_name[RTE_RING_NAMESIZE];
+	unsigned n_elt;
+	unsigned elt_size;
+};
+
+/*
+ * Simple example of custom mempool structure. Holds pointers to all the
+ * elements which are simply malloc'd in this example.
+ */
+struct custom_mempool {
+	struct rte_ring *r;            /* Ring to manage elements */
+	void *elements[MEMPOOL_SIZE];  /* Element pointers */
+};
+
+/*
+ * save the object number in the first 4 bytes of object data. All
+ * other bytes are set to 0.
+ */
+static void
+my_obj_init(struct rte_mempool *mp, __attribute__((unused)) void *arg,
+		void *obj, unsigned i)
+{
+	uint32_t *objnum = obj;
+
+	memset(obj, 0, mp->elt_size);
+	*objnum = i;
+	printf("Setting objnum to %d\n", i);
+}
+
+/* basic tests (done on one core) */
+static int
+test_mempool_basic(void)
+{
+	uint32_t *objnum;
+	void **objtable;
+	void *obj, *obj2;
+	char *obj_data;
+	int ret = 0;
+	unsigned i, j;
+
+	/* dump the mempool status */
+	rte_mempool_dump(stdout, mp);
+
+	printf("Count = %d\n", rte_mempool_count(mp));
+	printf("get an object\n");
+	if (rte_mempool_get(mp, &obj) < 0) {
+		printf("get Failed\n");
+		return -1;
+	}
+	printf("Count = %d\n", rte_mempool_count(mp));
+	rte_mempool_dump(stdout, mp);
+
+	/* tests that improve coverage */
+	printf("get object count\n");
+	if (rte_mempool_count(mp) != MEMPOOL_SIZE - 1)
+		return -1;
+
+	printf("get private data\n");
+	if (rte_mempool_get_priv(mp) !=
+			(char *) mp + MEMPOOL_HEADER_SIZE(mp, mp->pg_num))
+		return -1;
+
+	printf("get physical address of an object\n");
+	if (MEMPOOL_IS_CONTIG(mp) &&
+			rte_mempool_virt2phy(mp, obj) !=
+			(phys_addr_t) (mp->phys_addr +
+			(phys_addr_t) ((char *) obj - (char *) mp)))
+		return -1;
+
+	printf("put the object back\n");
+	rte_mempool_put(mp, obj);
+	rte_mempool_dump(stdout, mp);
+
+	printf("get 2 objects\n");
+	if (rte_mempool_get(mp, &obj) < 0)
+		return -1;
+	if (rte_mempool_get(mp, &obj2) < 0) {
+		rte_mempool_put(mp, obj);
+		return -1;
+	}
+	rte_mempool_dump(stdout, mp);
+
+	printf("put the objects back\n");
+	rte_mempool_put(mp, obj);
+	rte_mempool_put(mp, obj2);
+	rte_mempool_dump(stdout, mp);
+
+	/*
+	 * get many objects: we cannot get them all because the cache
+	 * on other cores may not be empty.
+	 */
+	objtable = malloc(MEMPOOL_SIZE * sizeof(void *));
+	if (objtable == NULL)
+		return -1;
+
+	for (i = 0; i < MEMPOOL_SIZE; i++) {
+		if (rte_mempool_get(mp, &objtable[i]) < 0)
+			break;
+	}
+
+	/*
+	 * for each object, check that its content was not modified,
+	 * and put objects back in pool
+	 */
+	while (i--) {
+		obj = objtable[i];
+		obj_data = obj;
+		objnum = obj;
+		if (*objnum > MEMPOOL_SIZE) {
+			printf("bad object number(%d)\n", *objnum);
+			ret = -1;
+			break;
+		}
+		for (j = sizeof(*objnum); j < mp->elt_size; j++) {
+			if (obj_data[j] != 0)
+				ret = -1;
+		}
+
+		rte_mempool_put(mp, objtable[i]);
+	}
+
+	free(objtable);
+	if (ret == -1)
+		printf("objects were modified!\n");
+
+	return ret;
+}
+
+static int test_mempool_creation_with_exceeded_cache_size(void)
+{
+	struct rte_mempool *mp_cov;
+
+	mp_cov = rte_mempool_create("test_mempool_creation_exceeded_cache_size",
+						MEMPOOL_SIZE,
+						MEMPOOL_ELT_SIZE,
+						RTE_MEMPOOL_CACHE_MAX_SIZE + 32,
+						0,
+						NULL, NULL,
+						my_obj_init, NULL,
+						SOCKET_ID_ANY, 0);
+	if (NULL != mp_cov)
+		return -1;
+
+	return 0;
+}
+
+/*
+ * it tests some more basic of mempool
+ */
+static int
+test_mempool_basic_ex(struct rte_mempool *mp)
+{
+	unsigned i;
+	void **obj;
+	void *err_obj;
+	int ret = -1;
+
+	if (mp == NULL)
+		return ret;
+
+	obj = rte_calloc("test_mempool_basic_ex",
+					MEMPOOL_SIZE , sizeof(void *), 0);
+	if (obj == NULL) {
+		printf("test_mempool_basic_ex fail to rte_malloc\n");
+		return ret;
+	}
+	printf("test_mempool_basic_ex now mempool (%s) has %u free entries\n",
+					mp->name, rte_mempool_free_count(mp));
+	if (rte_mempool_full(mp) != 1) {
+		printf("test_mempool_basic_ex the mempool should be full\n");
+		goto fail_mp_basic_ex;
+	}
+
+	for (i = 0; i < MEMPOOL_SIZE; i++) {
+		if (rte_mempool_mc_get(mp, &obj[i]) < 0) {
+			printf("test_mp_basic_ex fail to get object for [%u]\n",
+					i);
+			goto fail_mp_basic_ex;
+		}
+	}
+	if (rte_mempool_mc_get(mp, &err_obj) == 0) {
+		printf("test_mempool_basic_ex get an impossible obj\n");
+		goto fail_mp_basic_ex;
+	}
+	printf("number: %u\n", i);
+	if (rte_mempool_empty(mp) != 1) {
+		printf("test_mempool_basic_ex the mempool should be empty\n");
+		goto fail_mp_basic_ex;
+	}
+
+	for (i = 0; i < MEMPOOL_SIZE; i++)
+		rte_mempool_mp_put(mp, obj[i]);
+
+	if (rte_mempool_full(mp) != 1) {
+		printf("test_mempool_basic_ex the mempool should be full\n");
+		goto fail_mp_basic_ex;
+	}
+
+	ret = 0;
+
+fail_mp_basic_ex:
+	if (obj != NULL)
+		rte_free((void *)obj);
+
+	return ret;
+}
+
+static int
+test_mempool_same_name_twice_creation(void)
+{
+	struct rte_mempool *mp_tc;
+
+	mp_tc = rte_mempool_create("test_mempool_same_name_twice_creation",
+						MEMPOOL_SIZE,
+						MEMPOOL_ELT_SIZE, 0, 0,
+						NULL, NULL,
+						NULL, NULL,
+						SOCKET_ID_ANY, 0);
+	if (NULL == mp_tc)
+		return -1;
+
+	mp_tc = rte_mempool_create("test_mempool_same_name_twice_creation",
+						MEMPOOL_SIZE,
+						MEMPOOL_ELT_SIZE, 0, 0,
+						NULL, NULL,
+						NULL, NULL,
+						SOCKET_ID_ANY, 0);
+	if (NULL != mp_tc)
+		return -1;
+
+	return 0;
+}
+
+/*
+ * BAsic test for mempool_xmem functions.
+ */
+static int
+test_mempool_xmem_misc(void)
+{
+	uint32_t elt_num, total_size;
+	size_t sz;
+	ssize_t usz;
+
+	elt_num = MAX_KEEP;
+	total_size = rte_mempool_calc_obj_size(MEMPOOL_ELT_SIZE, 0, NULL);
+	sz = rte_mempool_xmem_size(elt_num, total_size, MEMPOOL_PG_SHIFT_MAX);
+
+	usz = rte_mempool_xmem_usage(NULL, elt_num, total_size, 0, 1,
+		MEMPOOL_PG_SHIFT_MAX);
+
+	if (sz != (size_t)usz)  {
+		printf("failure @ %s: rte_mempool_xmem_usage(%u, %u) "
+			"returns: %#zx, while expected: %#zx;\n",
+			__func__, elt_num, total_size, sz, (size_t)usz);
+		return (-1);
+	}
+
+	return 0;
+}
+
+
+
+static int
+test_ext_mempool(void)
+{
+	rte_atomic32_init(&synchro);
+
+	/* create an external mempool (without cache) */
+	if (ext_nocache == NULL)
+		ext_nocache = rte_mempool_create_ext(
+				"ext_nocache",         /* Name */
+				MEMPOOL_SIZE,          /* Number of Elements */
+				MEMPOOL_ELT_SIZE,      /* Element size */
+				0,                     /* Cache Size */
+				0,                     /* Private Data size */
+				NULL, NULL, NULL, NULL,
+				0,                     /* socket_id */
+				0,                     /* flags */
+				"custom_handler"
+				);
+	if (ext_nocache == NULL)
+		return -1;
+
+	/* create an external mempool (with cache) */
+	if (ext_cache == NULL)
+		ext_cache = rte_mempool_create_ext(
+				"ext_cache",           /* Name */
+				MEMPOOL_SIZE,          /* Number of Elements */
+				MEMPOOL_ELT_SIZE,      /* Element size */
+				16,                    /* Cache Size */
+				0,                     /* Private Data size */
+				NULL, NULL, NULL, NULL,
+				0,                     /* socket_id */
+				0,                     /* flags */
+				"custom_handler"
+				);
+	if (ext_cache == NULL)
+		return -1;
+
+	if (rte_mempool_get_handler_name(ext_nocache)) {
+		printf("Handler name is \"%s\"\n",
+			rte_mempool_get_handler_name(ext_nocache));
+	} else {
+		printf("Cannot lookup mempool handler name\n");
+		return -1;
+	}
+
+	if (rte_mempool_get_handler_name(ext_cache))
+		printf("Handler name is \"%s\"\n",
+			rte_mempool_get_handler_name(ext_cache));
+	else {
+		printf("Cannot lookup mempool handler name\n");
+		return -1;
+	}
+
+	/* retrieve the mempool from its name */
+	if (rte_mempool_lookup("ext_nocache") != ext_nocache) {
+		printf("Cannot lookup mempool from its name\n");
+		return -1;
+	}
+	/* retrieve the mempool from its name */
+	if (rte_mempool_lookup("ext_cache") != ext_cache) {
+		printf("Cannot lookup mempool from its name\n");
+		return -1;
+	}
+
+	rte_mempool_list_dump(stdout);
+
+	printf("Running basic tests\n");
+	/* basic tests without cache */
+	mp = ext_nocache;
+	if (test_mempool_basic() < 0)
+		return -1;
+
+	/* basic tests with cache */
+	mp = ext_cache;
+	if (test_mempool_basic() < 0)
+		return -1;
+
+	/* more basic tests without cache */
+	if (test_mempool_basic_ex(ext_nocache) < 0)
+		return -1;
+
+	if (test_mempool_creation_with_exceeded_cache_size() < 0)
+		return -1;
+
+	if (test_mempool_same_name_twice_creation() < 0)
+		return -1;
+	return 0;
+
+	if (test_mempool_xmem_misc() < 0)
+		return -1;
+
+	rte_mempool_list_dump(stdout);
+
+	return 0;
+}
+
+static struct test_command mempool_cmd = {
+	.command = "ext_mempool_autotest",
+	.callback = test_ext_mempool,
+};
+REGISTER_TEST_COMMAND(mempool_cmd);
-- 
2.5.0