From: Imre Deak <imre.deak@intel.com>
To: Daniel Vetter <daniel@ffwll.ch>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH 08/12] drm/i915: ensure the HW is powered when accessing the CRC HW block
Date: Wed, 17 Feb 2016 14:20:49 +0200 [thread overview]
Message-ID: <1455711649.2667.13.camel@intel.com> (raw)
In-Reply-To: <20160216160253.GR32705@phenom.ffwll.local>
On ti, 2016-02-16 at 17:02 +0100, Daniel Vetter wrote:
> On Fri, Feb 12, 2016 at 06:55:17PM +0200, Imre Deak wrote:
> > The assumption when adding the intel_display_power_is_enabled()
> > checks
> > was that if it returns success the power can't be turned off
> > afterwards
> > during the HW access, which is guaranteed by modeset locks. This
> > isn't
> > always true, so make sure we hold a dedicated reference for the
> > time of
> > the access.
> >
> > Signed-off-by: Imre Deak <imre.deak@intel.com>
>
> subject needs to be fixed to mention that this is for all the stuff
> in
> i915_debugfs.c.
Ah, yea i915_interrupt_info() is also changed, will updated that in the
log.
> With that fixed for patches 4-8:
>
> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
>
>
> > ---
> > drivers/gpu/drm/i915/i915_debugfs.c | 28 +++++++++++++++++++++--
> > -----
> > 1 file changed, 21 insertions(+), 7 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/i915_debugfs.c
> > b/drivers/gpu/drm/i915/i915_debugfs.c
> > index ec0c2a05e..9e19cf0 100644
> > --- a/drivers/gpu/drm/i915/i915_debugfs.c
> > +++ b/drivers/gpu/drm/i915/i915_debugfs.c
> > @@ -825,8 +825,11 @@ static int i915_interrupt_info(struct seq_file
> > *m, void *data)
> > }
> >
> > for_each_pipe(dev_priv, pipe) {
> > - if
> > (!intel_display_power_is_enabled(dev_priv,
> > - POWER_DOMAIN_PIPE(
> > pipe))) {
> > + enum intel_display_power_domain
> > power_domain;
> > +
> > + power_domain = POWER_DOMAIN_PIPE(pipe);
> > + if
> > (!intel_display_power_get_if_enabled(dev_priv,
> > + po
> > wer_domain)) {
> > seq_printf(m, "Pipe %c power
> > disabled\n",
> > pipe_name(pipe));
> > continue;
> > @@ -840,6 +843,8 @@ static int i915_interrupt_info(struct seq_file
> > *m, void *data)
> > seq_printf(m, "Pipe %c IER:\t%08x\n",
> > pipe_name(pipe),
> > I915_READ(GEN8_DE_PIPE_IER(pipe
> > )));
> > +
> > + intel_display_power_put(dev_priv,
> > power_domain);
> > }
> >
> > seq_printf(m, "Display Engine port interrupt
> > mask:\t%08x\n",
> > @@ -4004,6 +4009,7 @@ static int pipe_crc_set_source(struct
> > drm_device *dev, enum pipe pipe,
> > struct intel_pipe_crc *pipe_crc = &dev_priv-
> > >pipe_crc[pipe];
> > struct intel_crtc *crtc =
> > to_intel_crtc(intel_get_crtc_for_pipe(dev,
> >
> > pipe));
> > + enum intel_display_power_domain power_domain;
> > u32 val = 0; /* shut up gcc */
> > int ret;
> >
> > @@ -4014,7 +4020,8 @@ static int pipe_crc_set_source(struct
> > drm_device *dev, enum pipe pipe,
> > if (pipe_crc->source && source)
> > return -EINVAL;
> >
> > - if (!intel_display_power_is_enabled(dev_priv,
> > POWER_DOMAIN_PIPE(pipe))) {
> > + power_domain = POWER_DOMAIN_PIPE(pipe);
> > + if (!intel_display_power_get_if_enabled(dev_priv,
> > power_domain)) {
> > DRM_DEBUG_KMS("Trying to capture CRC while pipe is
> > off\n");
> > return -EIO;
> > }
> > @@ -4031,7 +4038,7 @@ static int pipe_crc_set_source(struct
> > drm_device *dev, enum pipe pipe,
> > ret = ivb_pipe_crc_ctl_reg(dev, pipe, &source,
> > &val);
> >
> > if (ret != 0)
> > - return ret;
> > + goto out;
> >
> > /* none -> real source transition */
> > if (source) {
> > @@ -4043,8 +4050,10 @@ static int pipe_crc_set_source(struct
> > drm_device *dev, enum pipe pipe,
> > entries = kcalloc(INTEL_PIPE_CRC_ENTRIES_NR,
> > sizeof(pipe_crc->entries[0]),
> > GFP_KERNEL);
> > - if (!entries)
> > - return -ENOMEM;
> > + if (!entries) {
> > + ret = -ENOMEM;
> > + goto out;
> > + }
> >
> > /*
> > * When IPS gets enabled, the pipe CRC changes.
> > Since IPS gets
> > @@ -4100,7 +4109,12 @@ static int pipe_crc_set_source(struct
> > drm_device *dev, enum pipe pipe,
> > hsw_enable_ips(crtc);
> > }
> >
> > - return 0;
> > + ret = 0;
> > +
> > +out:
> > + intel_display_power_put(dev_priv, power_domain);
> > +
> > + return ret;
> > }
> >
> > /*
> > --
> > 2.5.0
> >
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx@lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2016-02-17 12:20 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-12 16:55 [PATCH 00/12] drm/i915: add missing display power refs Imre Deak
2016-02-12 16:55 ` [PATCH 01/12] drm/i915: add helper to get a display power ref if it was already enabled Imre Deak
2016-02-15 8:09 ` Joonas Lahtinen
2016-02-15 14:18 ` [PATCH v2 " Imre Deak
2016-02-17 12:17 ` [PATCH v3 " Imre Deak
2016-02-12 16:55 ` [PATCH 02/12] drm/i915: ensure the HW is powered during display pipe HW readout Imre Deak
2016-02-15 13:23 ` Mika Kuoppala
2016-02-12 16:55 ` [PATCH 03/12] drm/i915/ibx: ensure the HW is powered during PLL " Imre Deak
2016-02-15 13:59 ` Mika Kuoppala
2016-02-12 16:55 ` [PATCH 04/12] drm/i915: ensure the HW is powered when disabling VGA Imre Deak
2016-02-12 16:55 ` [PATCH 05/12] drm/i915: ensure the HW is powered during HW access in assert_pipe Imre Deak
2016-02-12 16:55 ` [PATCH 06/12] drm/i915/crt: ensure the HW is powered during HW state readout Imre Deak
2016-02-12 16:55 ` [PATCH 07/12] drm/i915/ddi: " Imre Deak
2016-02-12 16:55 ` [PATCH 08/12] drm/i915: ensure the HW is powered when accessing the CRC HW block Imre Deak
2016-02-16 16:02 ` Daniel Vetter
2016-02-17 12:20 ` Imre Deak [this message]
2016-02-17 16:09 ` Daniel Vetter
2016-02-12 16:55 ` [PATCH 09/12] drm/i915/dp: ensure the HW is powered during HW state readout Imre Deak
2016-02-12 16:55 ` [PATCH 10/12] drm/i915/dsi: " Imre Deak
2016-02-12 16:55 ` [PATCH 11/12] drm/i915/hdmi: " Imre Deak
2016-02-12 16:55 ` [PATCH 12/12] drm/i915/lvds: " Imre Deak
2016-02-16 16:05 ` Daniel Vetter
2016-02-16 16:47 ` Imre Deak
2016-02-16 11:15 ` ✗ Fi.CI.BAT: failure for drm/i915: add missing display power refs (rev2) Patchwork
2016-02-16 14:04 ` [PATCH 00/12] drm/i915: add missing display power refs Mika Kuoppala
2016-02-16 17:35 ` Imre Deak
2016-02-17 12:44 ` ✓ Fi.CI.BAT: success for drm/i915: add missing display power refs (rev3) Patchwork
2016-02-17 14:21 ` Imre Deak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1455711649.2667.13.camel@intel.com \
--to=imre.deak@intel.com \
--cc=daniel@ffwll.ch \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.