Patch "ARM: dts: Kirkwood: Fix QNAP TS219 power-off" has been added to the 3.14-stable tree

[<gregkh@linuxfoundation.org>]

This is a note to let you know that I've just added the patch titled

    ARM: dts: Kirkwood: Fix QNAP TS219 power-off

to the 3.14-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     arm-dts-kirkwood-fix-qnap-ts219-power-off.patch
and it can be found in the queue-3.14 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From 5442f0eadf2885453d5b2ed8c8592f32a3744f8e Mon Sep 17 00:00:00 2001
From: Helmut Klein <hgkr.klein@gmail.com>
Date: Wed, 11 Nov 2015 15:03:04 +0100
Subject: ARM: dts: Kirkwood: Fix QNAP TS219 power-off

From: Helmut Klein <hgkr.klein@gmail.com>

commit 5442f0eadf2885453d5b2ed8c8592f32a3744f8e upstream.

The "reg" entry in the "poweroff" section of "kirkwood-ts219.dtsi"
addressed the wrong uart (0 = console). This patch changes the address
to select uart 1, which is the uart connected to the pic
microcontroller, which can switch the device off.

Signed-off-by: Helmut Klein <hgkr.klein@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Fixes: 4350a47bbac3 ("ARM: Kirkwood: Make use of the QNAP Power off driver.")
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/boot/dts/kirkwood-ts219.dtsi |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm/boot/dts/kirkwood-ts219.dtsi
+++ b/arch/arm/boot/dts/kirkwood-ts219.dtsi
@@ -47,7 +47,7 @@
 		};
 		poweroff@12100 {
 			compatible = "qnap,power-off";
-			reg = <0x12000 0x100>;
+			reg = <0x12100 0x100>;
 			clocks = <&gate_clk 7>;
 		};
 		spi@10600 {


Patches currently in stable-queue which might be from hgkr.klein@gmail.com are

queue-3.14/arm-dts-kirkwood-fix-qnap-ts219-power-off.patch