From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lucas Stach Subject: Re: [PATCH v2] ARM: dts: tegra: correct Beaver pinmux Date: Fri, 26 Feb 2016 20:36:24 +0100 Message-ID: <1456515384.20487.2.camel@lynxeye.de> References: <1456514310-27605-1-git-send-email-dev@lynxeye.de> <56D0A748.6060104@wwwdotorg.org> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: In-Reply-To: <56D0A748.6060104-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org> Sender: linux-tegra-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Stephen Warren Cc: Thierry Reding , Alexandre Courbot , linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, ARM kernel mailing list List-Id: linux-tegra@vger.kernel.org Am Freitag, den 26.02.2016, 12:28 -0700 schrieb Stephen Warren: > On 02/26/2016 12:18 PM, Lucas Stach wrote: > > Update pinmux to get rid of invalid uses of the rsvd1 function, > > which lead > > to the mux settings on those pins to not be applied. > >=20 > > Also add correct drive settings, derived from the Tegra3 TRM, for=20 Your comment from v1 is addressed here =C2=A0^^^^^^^^^^^^^^^^^^^^^^^^ > > SDIO1, > > which makes some more SD-cards work. >=20 > I replied the following to V1, which I don't see resolved: >=20 > =C2=A0> I think it would be worth mentioning in the commit descriptio= n > where=C2=A0 > =C2=A0> this[1] data came from. >=20 > [1] that was in response to the addition of the sdio1 drive settings. >=20 > Also, what is different in V2; is this actually V1 REPOST? Other than the reworded commit message there is no change in v2. Regards, Lucas From mboxrd@z Thu Jan 1 00:00:00 1970 From: dev@lynxeye.de (Lucas Stach) Date: Fri, 26 Feb 2016 20:36:24 +0100 Subject: [PATCH v2] ARM: dts: tegra: correct Beaver pinmux In-Reply-To: <56D0A748.6060104@wwwdotorg.org> References: <1456514310-27605-1-git-send-email-dev@lynxeye.de> <56D0A748.6060104@wwwdotorg.org> Message-ID: <1456515384.20487.2.camel@lynxeye.de> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Am Freitag, den 26.02.2016, 12:28 -0700 schrieb Stephen Warren: > On 02/26/2016 12:18 PM, Lucas Stach wrote: > > Update pinmux to get rid of invalid uses of the rsvd1 function, > > which lead > > to the mux settings on those pins to not be applied. > > > > Also add correct drive settings, derived from the Tegra3 TRM, for Your comment from v1 is addressed here ?^^^^^^^^^^^^^^^^^^^^^^^^ > > SDIO1, > > which makes some more SD-cards work. > > I replied the following to V1, which I don't see resolved: > > ?> I think it would be worth mentioning in the commit description > where? > ?> this[1] data came from. > > [1] that was in response to the addition of the sdio1 drive settings. > > Also, what is different in V2; is this actually V1 REPOST? Other than the reworded commit message there is no change in v2. Regards, Lucas