From: <gregkh@linuxfoundation.org>
To: <nab@linux-iscsi.org>, <gregkh@linuxfoundation.org>,
<sagig@mellanox.com>
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "target: Fix race for SCF_COMPARE_AND_WRITE_POST checking" has been added to the 3.14-stable tree
Date: Tue, 01 Mar 2016 08:16:10 +0000 [thread overview]
Message-ID: <145681761728148@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
target: Fix race for SCF_COMPARE_AND_WRITE_POST checking
to the 3.14-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
target-fix-race-for-scf_compare_and_write_post-checking.patch
and it can be found in the queue-3.14 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From 057085e522f8bf94c2e691a5b76880f68060f8ba Mon Sep 17 00:00:00 2001
From: Nicholas Bellinger <nab@linux-iscsi.org>
Date: Thu, 5 Nov 2015 23:37:59 -0800
Subject: target: Fix race for SCF_COMPARE_AND_WRITE_POST checking
From: Nicholas Bellinger <nab@linux-iscsi.org>
commit 057085e522f8bf94c2e691a5b76880f68060f8ba upstream.
This patch addresses a race + use after free where the first
stage of COMPARE_AND_WRITE in compare_and_write_callback()
is rescheduled after the backend sends the secondary WRITE,
resulting in second stage compare_and_write_post() callback
completing in target_complete_ok_work() before the first
can return.
Because current code depends on checking se_cmd->se_cmd_flags
after return from se_cmd->transport_complete_callback(),
this results in first stage having SCF_COMPARE_AND_WRITE_POST
set, which incorrectly falls through into second stage CAW
processing code, eventually triggering a NULL pointer
dereference due to use after free.
To address this bug, pass in a new *post_ret parameter into
se_cmd->transport_complete_callback(), and depend upon this
value instead of ->se_cmd_flags to determine when to return
or fall through into ->queue_status() code for CAW.
Cc: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/target/target_core_sbc.c | 13 +++++++++----
drivers/target/target_core_transport.c | 16 +++++++++-------
include/target/target_core_base.h | 2 +-
3 files changed, 19 insertions(+), 12 deletions(-)
--- a/drivers/target/target_core_sbc.c
+++ b/drivers/target/target_core_sbc.c
@@ -314,7 +314,8 @@ sbc_setup_write_same(struct se_cmd *cmd,
return 0;
}
-static sense_reason_t xdreadwrite_callback(struct se_cmd *cmd, bool success)
+static sense_reason_t xdreadwrite_callback(struct se_cmd *cmd, bool success,
+ int *post_ret)
{
unsigned char *buf, *addr;
struct scatterlist *sg;
@@ -378,7 +379,8 @@ sbc_execute_rw(struct se_cmd *cmd)
cmd->data_direction);
}
-static sense_reason_t compare_and_write_post(struct se_cmd *cmd, bool success)
+static sense_reason_t compare_and_write_post(struct se_cmd *cmd, bool success,
+ int *post_ret)
{
struct se_device *dev = cmd->se_dev;
@@ -388,8 +390,10 @@ static sense_reason_t compare_and_write_
* sent to the backend driver.
*/
spin_lock_irq(&cmd->t_state_lock);
- if ((cmd->transport_state & CMD_T_SENT) && !cmd->scsi_status)
+ if ((cmd->transport_state & CMD_T_SENT) && !cmd->scsi_status) {
cmd->se_cmd_flags |= SCF_COMPARE_AND_WRITE_POST;
+ *post_ret = 1;
+ }
spin_unlock_irq(&cmd->t_state_lock);
/*
@@ -401,7 +405,8 @@ static sense_reason_t compare_and_write_
return TCM_NO_SENSE;
}
-static sense_reason_t compare_and_write_callback(struct se_cmd *cmd, bool success)
+static sense_reason_t compare_and_write_callback(struct se_cmd *cmd, bool success,
+ int *post_ret)
{
struct se_device *dev = cmd->se_dev;
struct scatterlist *write_sg = NULL, *sg;
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -1581,7 +1581,7 @@ bool target_stop_cmd(struct se_cmd *cmd,
void transport_generic_request_failure(struct se_cmd *cmd,
sense_reason_t sense_reason)
{
- int ret = 0;
+ int ret = 0, post_ret = 0;
pr_debug("-----[ Storage Engine Exception for cmd: %p ITT: 0x%08x"
" CDB: 0x%02x\n", cmd, cmd->se_tfo->get_task_tag(cmd),
@@ -1604,7 +1604,7 @@ void transport_generic_request_failure(s
*/
if ((cmd->se_cmd_flags & SCF_COMPARE_AND_WRITE) &&
cmd->transport_complete_callback)
- cmd->transport_complete_callback(cmd, false);
+ cmd->transport_complete_callback(cmd, false, &post_ret);
switch (sense_reason) {
case TCM_NON_EXISTENT_LUN:
@@ -1940,11 +1940,13 @@ static void target_complete_ok_work(stru
*/
if (cmd->transport_complete_callback) {
sense_reason_t rc;
-
- rc = cmd->transport_complete_callback(cmd, true);
- if (!rc && !(cmd->se_cmd_flags & SCF_COMPARE_AND_WRITE_POST)) {
- if ((cmd->se_cmd_flags & SCF_COMPARE_AND_WRITE) &&
- !cmd->data_length)
+ bool caw = (cmd->se_cmd_flags & SCF_COMPARE_AND_WRITE);
+ bool zero_dl = !(cmd->data_length);
+ int post_ret = 0;
+
+ rc = cmd->transport_complete_callback(cmd, true, &post_ret);
+ if (!rc && !post_ret) {
+ if (caw && zero_dl)
goto queue_rsp;
return;
--- a/include/target/target_core_base.h
+++ b/include/target/target_core_base.h
@@ -513,7 +513,7 @@ struct se_cmd {
sense_reason_t (*execute_cmd)(struct se_cmd *);
sense_reason_t (*execute_rw)(struct se_cmd *, struct scatterlist *,
u32, enum dma_data_direction);
- sense_reason_t (*transport_complete_callback)(struct se_cmd *, bool);
+ sense_reason_t (*transport_complete_callback)(struct se_cmd *, bool, int *);
unsigned char *t_task_cdb;
unsigned char __t_task_cdb[TCM_MAX_COMMAND_SIZE];
Patches currently in stable-queue which might be from nab@linux-iscsi.org are
queue-3.14/target-fix-compare_and_write-non-zero-sgl-offset-data-corruption.patch
queue-3.14/target-fix-race-for-scf_compare_and_write_post-checking.patch
reply other threads:[~2016-03-01 8:16 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=145681761728148@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=nab@linux-iscsi.org \
--cc=sagig@mellanox.com \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.