From: <gregkh@linuxfoundation.org>
To: <adrian.hunter@intel.com>, <gregkh@linuxfoundation.org>,
<ulf.hansson@linaro.org>
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "mmc: sdhci-pci: Fix card detect race for Intel BXT/APL" has been added to the 4.4-stable tree
Date: Tue, 01 Mar 2016 19:10:37 +0000 [thread overview]
Message-ID: <145685943229204@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
mmc: sdhci-pci: Fix card detect race for Intel BXT/APL
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
mmc-sdhci-pci-fix-card-detect-race-for-intel-bxt-apl.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From 163cbe31e5163459908a41a2b4e0d33a28fd557a Mon Sep 17 00:00:00 2001
From: Adrian Hunter <adrian.hunter@intel.com>
Date: Tue, 9 Feb 2016 16:12:37 +0200
Subject: mmc: sdhci-pci: Fix card detect race for Intel BXT/APL
From: Adrian Hunter <adrian.hunter@intel.com>
commit 163cbe31e5163459908a41a2b4e0d33a28fd557a upstream.
Intel BXT/APL use a card detect GPIO however the host controller
will not enable bus power unless it's card detect also reflects
the presence of a card. Unfortunately those 2 things race which
can result in commands not starting, after which the controller
does nothing and there is a 10 second wait for the driver's
10-second timer to timeout.
That is fixed by having the driver look also at the present state
register to determine if the card is present. Consequently, provide
a 'get_cd' mmc host operation for BXT/APL that does that.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/mmc/host/sdhci-pci-core.c | 31 +++++++++++++++++++++++++++++++
1 file changed, 31 insertions(+)
--- a/drivers/mmc/host/sdhci-pci-core.c
+++ b/drivers/mmc/host/sdhci-pci-core.c
@@ -330,6 +330,33 @@ static void spt_read_drive_strength(stru
sdhci_pci_spt_drive_strength = 0x10 | ((val >> 12) & 0xf);
}
+static int bxt_get_cd(struct mmc_host *mmc)
+{
+ int gpio_cd = mmc_gpio_get_cd(mmc);
+ struct sdhci_host *host = mmc_priv(mmc);
+ unsigned long flags;
+ int ret = 0;
+
+ if (!gpio_cd)
+ return 0;
+
+ pm_runtime_get_sync(mmc->parent);
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ if (host->flags & SDHCI_DEVICE_DEAD)
+ goto out;
+
+ ret = !!(sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT);
+out:
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ pm_runtime_mark_last_busy(mmc->parent);
+ pm_runtime_put_autosuspend(mmc->parent);
+
+ return ret;
+}
+
static int byt_emmc_probe_slot(struct sdhci_pci_slot *slot)
{
slot->host->mmc->caps |= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE |
@@ -362,6 +389,10 @@ static int byt_sd_probe_slot(struct sdhc
slot->cd_con_id = NULL;
slot->cd_idx = 0;
slot->cd_override_level = true;
+ if (slot->chip->pdev->device == PCI_DEVICE_ID_INTEL_BXT_SD ||
+ slot->chip->pdev->device == PCI_DEVICE_ID_INTEL_APL_SD)
+ slot->host->mmc_host_ops.get_cd = bxt_get_cd;
+
return 0;
}
Patches currently in stable-queue which might be from adrian.hunter@intel.com are
queue-4.4/mmc-sdhci-acpi-fix-card-detect-race-for-intel-bxt-apl.patch
queue-4.4/mmc-mmc-fix-incorrect-use-of-driver-strength-switching-hs200-and-hs400.patch
queue-4.4/mmc-sdhci-allow-override-of-get_cd-called-from-sdhci_request.patch
queue-4.4/mmc-sdhci-pci-do-not-default-to-33-ohm-driver-strength-for-intel-spt.patch
queue-4.4/mmc-sdio-fix-invalid-vdd-in-voltage-switch-power-cycle.patch
queue-4.4/mmc-sdhci-fix-sdhci_runtime_pm_bus_on-off.patch
queue-4.4/mmc-sdhci-allow-override-of-mmc-host-operations.patch
queue-4.4/mmc-sdhci-fix-dma-descriptor-with-zero-data-length.patch
queue-4.4/mmc-sdhci-pci-fix-card-detect-race-for-intel-bxt-apl.patch
reply other threads:[~2016-03-01 19:10 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=145685943229204@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=adrian.hunter@intel.com \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.