From: <gregkh@linuxfoundation.org>
To: nab@linux-iscsi.org, agrover@redhat.com, hare@suse.de,
hch@lst.de, himanshu.madhani@qlogic.com, mchristi@redhat.com,
quinn.tran@qlogic.com, sagig@mellanox.com
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] target: Fix LUN_RESET active TMR descriptor handling" failed to apply to 3.14-stable tree
Date: Tue, 01 Mar 2016 13:51:12 -0800 [thread overview]
Message-ID: <145686907297183@kroah.com> (raw)
The patch below does not apply to the 3.14-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
>From a6d9bb1c9605cd4f44e2d8290dc4d0e88f20292d Mon Sep 17 00:00:00 2001
From: Nicholas Bellinger <nab@linux-iscsi.org>
Date: Mon, 11 Jan 2016 21:53:05 -0800
Subject: [PATCH] target: Fix LUN_RESET active TMR descriptor handling
This patch fixes a NULL pointer se_cmd->cmd_kref < 0
refcount bug during TMR LUN_RESET with active TMRs,
triggered during se_cmd + se_tmr_req descriptor
shutdown + release via core_tmr_drain_tmr_list().
To address this bug, go ahead and obtain a local
kref_get_unless_zero(&se_cmd->cmd_kref) for active I/O
to set CMD_T_ABORTED, and transport_wait_for_tasks()
followed by the final target_put_sess_cmd() to drop
the local ->cmd_kref.
Also add two new checks within target_tmr_work() to
avoid CMD_T_ABORTED -> TFO->queue_tm_rsp() callbacks
ahead of invoking the backend -> fabric put in
transport_cmd_check_stop_to_fabric().
For good measure, also change core_tmr_release_req()
to use list_del_init() ahead of se_tmr_req memory
free.
Reviewed-by: Quinn Tran <quinn.tran@qlogic.com>
Cc: Himanshu Madhani <himanshu.madhani@qlogic.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Andy Grover <agrover@redhat.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
diff --git a/drivers/target/target_core_tmr.c b/drivers/target/target_core_tmr.c
index fb3decc28589..072af07bd2ff 100644
--- a/drivers/target/target_core_tmr.c
+++ b/drivers/target/target_core_tmr.c
@@ -68,7 +68,7 @@ void core_tmr_release_req(struct se_tmr_req *tmr)
if (dev) {
spin_lock_irqsave(&dev->se_tmr_lock, flags);
- list_del(&tmr->tmr_list);
+ list_del_init(&tmr->tmr_list);
spin_unlock_irqrestore(&dev->se_tmr_lock, flags);
}
@@ -194,9 +194,11 @@ static void core_tmr_drain_tmr_list(
struct list_head *preempt_and_abort_list)
{
LIST_HEAD(drain_tmr_list);
+ struct se_session *sess;
struct se_tmr_req *tmr_p, *tmr_pp;
struct se_cmd *cmd;
unsigned long flags;
+ bool rc;
/*
* Release all pending and outgoing TMRs aside from the received
* LUN_RESET tmr..
@@ -222,17 +224,31 @@ static void core_tmr_drain_tmr_list(
if (target_check_cdb_and_preempt(preempt_and_abort_list, cmd))
continue;
+ sess = cmd->se_sess;
+ if (WARN_ON_ONCE(!sess))
+ continue;
+
+ spin_lock(&sess->sess_cmd_lock);
spin_lock(&cmd->t_state_lock);
if (!(cmd->transport_state & CMD_T_ACTIVE)) {
spin_unlock(&cmd->t_state_lock);
+ spin_unlock(&sess->sess_cmd_lock);
continue;
}
if (cmd->t_state == TRANSPORT_ISTATE_PROCESSING) {
spin_unlock(&cmd->t_state_lock);
+ spin_unlock(&sess->sess_cmd_lock);
continue;
}
+ cmd->transport_state |= CMD_T_ABORTED;
spin_unlock(&cmd->t_state_lock);
+ rc = kref_get_unless_zero(&cmd->cmd_kref);
+ spin_unlock(&sess->sess_cmd_lock);
+ if (!rc) {
+ printk("LUN_RESET TMR: non-zero kref_get_unless_zero\n");
+ continue;
+ }
list_move_tail(&tmr_p->tmr_list, &drain_tmr_list);
}
spin_unlock_irqrestore(&dev->se_tmr_lock, flags);
@@ -246,7 +262,11 @@ static void core_tmr_drain_tmr_list(
(preempt_and_abort_list) ? "Preempt" : "", tmr_p,
tmr_p->function, tmr_p->response, cmd->t_state);
+ cancel_work_sync(&cmd->work);
+ transport_wait_for_tasks(cmd);
+
transport_cmd_finish_abort(cmd, 1);
+ target_put_sess_cmd(cmd);
}
}
diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
index af52f8bd8954..94e372af9e28 100644
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -2900,8 +2900,17 @@ static void target_tmr_work(struct work_struct *work)
struct se_cmd *cmd = container_of(work, struct se_cmd, work);
struct se_device *dev = cmd->se_dev;
struct se_tmr_req *tmr = cmd->se_tmr_req;
+ unsigned long flags;
int ret;
+ spin_lock_irqsave(&cmd->t_state_lock, flags);
+ if (cmd->transport_state & CMD_T_ABORTED) {
+ tmr->response = TMR_FUNCTION_REJECTED;
+ spin_unlock_irqrestore(&cmd->t_state_lock, flags);
+ goto check_stop;
+ }
+ spin_unlock_irqrestore(&cmd->t_state_lock, flags);
+
switch (tmr->function) {
case TMR_ABORT_TASK:
core_tmr_abort_task(dev, tmr, cmd->se_sess);
@@ -2934,9 +2943,17 @@ static void target_tmr_work(struct work_struct *work)
break;
}
+ spin_lock_irqsave(&cmd->t_state_lock, flags);
+ if (cmd->transport_state & CMD_T_ABORTED) {
+ spin_unlock_irqrestore(&cmd->t_state_lock, flags);
+ goto check_stop;
+ }
cmd->t_state = TRANSPORT_ISTATE_PROCESSING;
+ spin_unlock_irqrestore(&cmd->t_state_lock, flags);
+
cmd->se_tfo->queue_tm_rsp(cmd);
+check_stop:
transport_cmd_check_stop_to_fabric(cmd);
}
reply other threads:[~2016-03-01 21:51 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=145686907297183@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=agrover@redhat.com \
--cc=hare@suse.de \
--cc=hch@lst.de \
--cc=himanshu.madhani@qlogic.com \
--cc=mchristi@redhat.com \
--cc=nab@linux-iscsi.org \
--cc=quinn.tran@qlogic.com \
--cc=sagig@mellanox.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.