From: <gregkh@linuxfoundation.org>
To: <quinn.tran@qlogic.com>
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "qla2xxx: Fix stale pointer access." has been added to the 4.4-stable tree
Date: Tue, 01 Mar 2016 22:00:45 +0000 [thread overview]
Message-ID: <145686964314816@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
qla2xxx: Fix stale pointer access.
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
qla2xxx-fix-stale-pointer-access.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From cb43285ff7039fe3c4b0bc476e6d6569c31104f3 Mon Sep 17 00:00:00 2001
From: Quinn Tran <quinn.tran@qlogic.com>
Date: Thu, 4 Feb 2016 11:45:16 -0500
Subject: qla2xxx: Fix stale pointer access.
From: Quinn Tran <quinn.tran@qlogic.com>
commit cb43285ff7039fe3c4b0bc476e6d6569c31104f3 upstream.
[ Upstream Commit 84e32a06f4f8756ce9ec3c8dc7e97896575f0771 ]
Commit 84e32a0 ("qla2xxx: Use pci_enable_msix_range() instead of
pci_enable_msix()") introduced a regression when target mode is enabled.
In qla24xx_enable_msix(), ha->max_rsp_queues was incorrectly set
to a value higher than the number of response queues allocated causing
an invalid dereference. Specifically here in qla2x00_init_rings():
*rsp->in_ptr = 0;
Add additional check to make sure the pointer is valid. following
call stack will be seen
---- 8< ----
RIP: 0010:[<ffffffffa02ccadc>] [<ffffffffa02ccadc>] qla2x00_init_rings+0xdc/0x320 [qla2xxx]
RSP: 0018:ffff880429447dd8 EFLAGS: 00010082
....
Call Trace:
[<ffffffffa02ceb40>] qla2x00_abort_isp+0x170/0x6b0 [qla2xxx]
[<ffffffffa02c6f77>] qla2x00_do_dpc+0x357/0x7f0 [qla2xxx]
[<ffffffffa02c6c20>] ? qla2x00_relogin+0x260/0x260 [qla2xxx]
[<ffffffff8107d2c9>] kthread+0xc9/0xe0
[<ffffffff8107d200>] ? flush_kthread_worker+0x90/0x90
[<ffffffff8172cc6f>] ret_from_fork+0x3f/0x70
[<ffffffff8107d200>] ? flush_kthread_worker+0x90/0x90
---- 8< ----
Signed-off-by: Quinn Tran <quinn.tran@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/scsi/qla2xxx/qla_init.c | 10 +++++-----
drivers/scsi/qla2xxx/qla_isr.c | 4 ++--
drivers/scsi/qla2xxx/qla_mid.c | 4 ++--
drivers/scsi/qla2xxx/qla_os.c | 6 ++++++
drivers/scsi/qla2xxx/qla_tmpl.c | 16 ++++++++++++++++
5 files changed, 31 insertions(+), 9 deletions(-)
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -2192,7 +2192,7 @@ qla2x00_init_rings(scsi_qla_host_t *vha)
/* Clear outstanding commands array. */
for (que = 0; que < ha->max_req_queues; que++) {
req = ha->req_q_map[que];
- if (!req)
+ if (!req || !test_bit(que, ha->req_qid_map))
continue;
req->out_ptr = (void *)(req->ring + req->length);
*req->out_ptr = 0;
@@ -2209,7 +2209,7 @@ qla2x00_init_rings(scsi_qla_host_t *vha)
for (que = 0; que < ha->max_rsp_queues; que++) {
rsp = ha->rsp_q_map[que];
- if (!rsp)
+ if (!rsp || !test_bit(que, ha->rsp_qid_map))
continue;
rsp->in_ptr = (void *)(rsp->ring + rsp->length);
*rsp->in_ptr = 0;
@@ -4961,7 +4961,7 @@ qla25xx_init_queues(struct qla_hw_data *
for (i = 1; i < ha->max_rsp_queues; i++) {
rsp = ha->rsp_q_map[i];
- if (rsp) {
+ if (rsp && test_bit(i, ha->rsp_qid_map)) {
rsp->options &= ~BIT_0;
ret = qla25xx_init_rsp_que(base_vha, rsp);
if (ret != QLA_SUCCESS)
@@ -4976,8 +4976,8 @@ qla25xx_init_queues(struct qla_hw_data *
}
for (i = 1; i < ha->max_req_queues; i++) {
req = ha->req_q_map[i];
- if (req) {
- /* Clear outstanding commands array. */
+ if (req && test_bit(i, ha->req_qid_map)) {
+ /* Clear outstanding commands array. */
req->options &= ~BIT_0;
ret = qla25xx_init_req_que(base_vha, req);
if (ret != QLA_SUCCESS)
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -3018,9 +3018,9 @@ qla24xx_enable_msix(struct qla_hw_data *
"MSI-X: Failed to enable support "
"-- %d/%d\n Retry with %d vectors.\n",
ha->msix_count, ret, ret);
+ ha->msix_count = ret;
+ ha->max_rsp_queues = ha->msix_count - 1;
}
- ha->msix_count = ret;
- ha->max_rsp_queues = ha->msix_count - 1;
ha->msix_entries = kzalloc(sizeof(struct qla_msix_entry) *
ha->msix_count, GFP_KERNEL);
if (!ha->msix_entries) {
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -600,7 +600,7 @@ qla25xx_delete_queues(struct scsi_qla_ho
/* Delete request queues */
for (cnt = 1; cnt < ha->max_req_queues; cnt++) {
req = ha->req_q_map[cnt];
- if (req) {
+ if (req && test_bit(cnt, ha->req_qid_map)) {
ret = qla25xx_delete_req_que(vha, req);
if (ret != QLA_SUCCESS) {
ql_log(ql_log_warn, vha, 0x00ea,
@@ -614,7 +614,7 @@ qla25xx_delete_queues(struct scsi_qla_ho
/* Delete response queues */
for (cnt = 1; cnt < ha->max_rsp_queues; cnt++) {
rsp = ha->rsp_q_map[cnt];
- if (rsp) {
+ if (rsp && test_bit(cnt, ha->rsp_qid_map)) {
ret = qla25xx_delete_rsp_que(vha, rsp);
if (ret != QLA_SUCCESS) {
ql_log(ql_log_warn, vha, 0x00eb,
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -397,6 +397,9 @@ static void qla2x00_free_queues(struct q
int cnt;
for (cnt = 0; cnt < ha->max_req_queues; cnt++) {
+ if (!test_bit(cnt, ha->req_qid_map))
+ continue;
+
req = ha->req_q_map[cnt];
qla2x00_free_req_que(ha, req);
}
@@ -404,6 +407,9 @@ static void qla2x00_free_queues(struct q
ha->req_q_map = NULL;
for (cnt = 0; cnt < ha->max_rsp_queues; cnt++) {
+ if (!test_bit(cnt, ha->rsp_qid_map))
+ continue;
+
rsp = ha->rsp_q_map[cnt];
qla2x00_free_rsp_que(ha, rsp);
}
--- a/drivers/scsi/qla2xxx/qla_tmpl.c
+++ b/drivers/scsi/qla2xxx/qla_tmpl.c
@@ -395,6 +395,10 @@ qla27xx_fwdt_entry_t263(struct scsi_qla_
if (ent->t263.queue_type == T263_QUEUE_TYPE_REQ) {
for (i = 0; i < vha->hw->max_req_queues; i++) {
struct req_que *req = vha->hw->req_q_map[i];
+
+ if (!test_bit(i, vha->hw->req_qid_map))
+ continue;
+
if (req || !buf) {
length = req ?
req->length : REQUEST_ENTRY_CNT_24XX;
@@ -408,6 +412,10 @@ qla27xx_fwdt_entry_t263(struct scsi_qla_
} else if (ent->t263.queue_type == T263_QUEUE_TYPE_RSP) {
for (i = 0; i < vha->hw->max_rsp_queues; i++) {
struct rsp_que *rsp = vha->hw->rsp_q_map[i];
+
+ if (!test_bit(i, vha->hw->rsp_qid_map))
+ continue;
+
if (rsp || !buf) {
length = rsp ?
rsp->length : RESPONSE_ENTRY_CNT_MQ;
@@ -634,6 +642,10 @@ qla27xx_fwdt_entry_t274(struct scsi_qla_
if (ent->t274.queue_type == T274_QUEUE_TYPE_REQ_SHAD) {
for (i = 0; i < vha->hw->max_req_queues; i++) {
struct req_que *req = vha->hw->req_q_map[i];
+
+ if (!test_bit(i, vha->hw->req_qid_map))
+ continue;
+
if (req || !buf) {
qla27xx_insert16(i, buf, len);
qla27xx_insert16(1, buf, len);
@@ -645,6 +657,10 @@ qla27xx_fwdt_entry_t274(struct scsi_qla_
} else if (ent->t274.queue_type == T274_QUEUE_TYPE_RSP_SHAD) {
for (i = 0; i < vha->hw->max_rsp_queues; i++) {
struct rsp_que *rsp = vha->hw->rsp_q_map[i];
+
+ if (!test_bit(i, vha->hw->rsp_qid_map))
+ continue;
+
if (rsp || !buf) {
qla27xx_insert16(i, buf, len);
qla27xx_insert16(1, buf, len);
Patches currently in stable-queue which might be from quinn.tran@qlogic.com are
queue-4.4/qla2xxx-fix-stale-pointer-access.patch
queue-4.4/target-fix-remote-port-tmr-abort-se_cmd-fabric-stop.patch
queue-4.4/target-fix-lun_reset-active-tmr-descriptor-handling.patch
queue-4.4/target-fix-race-with-scf_send_delayed_tas-handling.patch
queue-4.4/target-fix-lun_reset-active-i-o-handling-for-ack_kref.patch
queue-4.4/target-fix-tas-handling-for-multi-session-se_node_acls.patch
reply other threads:[~2016-03-01 22:00 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=145686964314816@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=quinn.tran@qlogic.com \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.