From: <gregkh@linuxfoundation.org>
To: ym0914@gmail.com, linus.walleij@linaro.org, tomasz.figa@gmail.com
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] pinctrl: samsung: fix SMP race condition" failed to apply to 4.4-stable tree
Date: Tue, 01 Mar 2016 14:09:21 -0800 [thread overview]
Message-ID: <145687016112285@kroah.com> (raw)
The patch below does not apply to the 4.4-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
>From d9ff0eb9ca4b00ce2fbf9ede1e99681f05c0bc91 Mon Sep 17 00:00:00 2001
From: Youngmin Nam <ym0914@gmail.com>
Date: Tue, 9 Feb 2016 00:49:28 +0900
Subject: [PATCH] pinctrl: samsung: fix SMP race condition
Previously, samsung_gpio_drection_in/output function were not covered
with a spinlock.
For example, samsung_gpio_direction_output function consists of
two functions.
1. samsung_gpio_set
2. samsung_gpio_set_direction
When 2 CPUs try to control the same gpio pin heavily,
(situation like i2c control with gpio emulation)
This situation can cause below problem.
CPU 0 | CPU1
|
samsung_gpio_direction_output |
samsung_gpio_set(pin A as 1) | samsung_gpio_direction_output
| samsung_gpio_set(pin A as 0)
samsung_gpio_set_direction |
| samsung_gpio_set_direction
The initial value of pin A will be set as 0 while we wanted to set pin A as 1.
This patch modifies samsung_gpio_direction_in/output function
to be done in one spinlock to fix race condition.
Additionally, the new samsung_gpio_set_value was added to implement
gpio set callback(samsung_gpio_set) with spinlock using this function.
Cc: stable@vger.kernel.org
Signed-off-by: Youngmin Nam <ym0914@gmail.com>
Acked-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
diff --git a/drivers/pinctrl/samsung/pinctrl-samsung.c b/drivers/pinctrl/samsung/pinctrl-samsung.c
index f67b1e958589..5cc97f85db02 100644
--- a/drivers/pinctrl/samsung/pinctrl-samsung.c
+++ b/drivers/pinctrl/samsung/pinctrl-samsung.c
@@ -514,25 +514,35 @@ static const struct pinconf_ops samsung_pinconf_ops = {
.pin_config_group_set = samsung_pinconf_group_set,
};
-/* gpiolib gpio_set callback function */
-static void samsung_gpio_set(struct gpio_chip *gc, unsigned offset, int value)
+/*
+ * The samsung_gpio_set_vlaue() should be called with "bank->slock" held
+ * to avoid race condition.
+ */
+static void samsung_gpio_set_value(struct gpio_chip *gc,
+ unsigned offset, int value)
{
struct samsung_pin_bank *bank = gpiochip_get_data(gc);
const struct samsung_pin_bank_type *type = bank->type;
- unsigned long flags;
void __iomem *reg;
u32 data;
reg = bank->drvdata->virt_base + bank->pctl_offset;
- spin_lock_irqsave(&bank->slock, flags);
-
data = readl(reg + type->reg_offset[PINCFG_TYPE_DAT]);
data &= ~(1 << offset);
if (value)
data |= 1 << offset;
writel(data, reg + type->reg_offset[PINCFG_TYPE_DAT]);
+}
+
+/* gpiolib gpio_set callback function */
+static void samsung_gpio_set(struct gpio_chip *gc, unsigned offset, int value)
+{
+ struct samsung_pin_bank *bank = gpiochip_get_data(gc);
+ unsigned long flags;
+ spin_lock_irqsave(&bank->slock, flags);
+ samsung_gpio_set_value(gc, offset, value);
spin_unlock_irqrestore(&bank->slock, flags);
}
@@ -553,6 +563,8 @@ static int samsung_gpio_get(struct gpio_chip *gc, unsigned offset)
}
/*
+ * The samsung_gpio_set_direction() should be called with "bank->slock" held
+ * to avoid race condition.
* The calls to gpio_direction_output() and gpio_direction_input()
* leads to this function call.
*/
@@ -564,7 +576,6 @@ static int samsung_gpio_set_direction(struct gpio_chip *gc,
struct samsung_pinctrl_drv_data *drvdata;
void __iomem *reg;
u32 data, mask, shift;
- unsigned long flags;
bank = gpiochip_get_data(gc);
type = bank->type;
@@ -581,31 +592,42 @@ static int samsung_gpio_set_direction(struct gpio_chip *gc,
reg += 4;
}
- spin_lock_irqsave(&bank->slock, flags);
-
data = readl(reg);
data &= ~(mask << shift);
if (!input)
data |= FUNC_OUTPUT << shift;
writel(data, reg);
- spin_unlock_irqrestore(&bank->slock, flags);
-
return 0;
}
/* gpiolib gpio_direction_input callback function. */
static int samsung_gpio_direction_input(struct gpio_chip *gc, unsigned offset)
{
- return samsung_gpio_set_direction(gc, offset, true);
+ struct samsung_pin_bank *bank = gpiochip_get_data(gc);
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&bank->slock, flags);
+ ret = samsung_gpio_set_direction(gc, offset, true);
+ spin_unlock_irqrestore(&bank->slock, flags);
+ return ret;
}
/* gpiolib gpio_direction_output callback function. */
static int samsung_gpio_direction_output(struct gpio_chip *gc, unsigned offset,
int value)
{
- samsung_gpio_set(gc, offset, value);
- return samsung_gpio_set_direction(gc, offset, false);
+ struct samsung_pin_bank *bank = gpiochip_get_data(gc);
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&bank->slock, flags);
+ samsung_gpio_set_value(gc, offset, value);
+ ret = samsung_gpio_set_direction(gc, offset, false);
+ spin_unlock_irqrestore(&bank->slock, flags);
+
+ return ret;
}
/*
reply other threads:[~2016-03-01 22:09 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=145687016112285@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=linus.walleij@linaro.org \
--cc=stable@vger.kernel.org \
--cc=tomasz.figa@gmail.com \
--cc=ym0914@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.