All of lore.kernel.org
 help / color / mirror / Atom feed
From: Adam Ford <aford173@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH V4] OMAP3: Various: Future-proof serial platdata
Date: Tue,  1 Mar 2016 17:23:29 -0600	[thread overview]
Message-ID: <1456874609-29666-1-git-send-email-aford173@gmail.com> (raw)

A few boards still use ns16550_platdata structures, but assume the structure
is going to be in a specific order. By explicitly naming each entry,
this should also help 'future-proof' in the event the structure changes.

Tested on the Logic PD Torpedo + Wireless.

I only changed a handful of devices that used the same syntax as the Logic
board.  Appologies if I missed one or stepped on toes.  Thanks to Derald Woods
and Alexander Graf.

Signed-off-by: Adam Ford <aford173@gmail.com>

V4: Fix subject heading

V3: Remove  reg_offset out in all the structs. It was reverted out, and and if
it did exist, it would get initialized to 0 by default.

V2: I hastily copy-pasted the boards without looking at the UART number.
This addresses 3 boards that use UART3 and not UART1.
---
 board/isee/igep00x0/igep00x0.c      | 6 +++---
 board/logicpd/omap3som/omap3logic.c | 6 +++---
 board/logicpd/zoom1/zoom1.c         | 6 +++---
 board/overo/overo.c                 | 6 +++---
 board/quipos/cairo/cairo.c          | 6 +++---
 board/ti/beagle/beagle.c            | 6 +++---
 board/timll/devkit8000/devkit8000.c | 6 +++---
 7 files changed, 21 insertions(+), 21 deletions(-)

diff --git a/board/isee/igep00x0/igep00x0.c b/board/isee/igep00x0/igep00x0.c
index e2fce50..d1a6a6f 100644
--- a/board/isee/igep00x0/igep00x0.c
+++ b/board/isee/igep00x0/igep00x0.c
@@ -34,9 +34,9 @@ static const u32 gpmc_lan_config[] = {
 #endif
 
 static const struct ns16550_platdata igep_serial = {
-	OMAP34XX_UART3,
-	2,
-	V_NS16550_CLK
+	.base = OMAP34XX_UART3,
+	.reg_shift = 2,
+	.clock = V_NS16550_CLK
 };
 
 U_BOOT_DEVICE(igep_uart) = {
diff --git a/board/logicpd/omap3som/omap3logic.c b/board/logicpd/omap3som/omap3logic.c
index 668f684..51d2987 100644
--- a/board/logicpd/omap3som/omap3logic.c
+++ b/board/logicpd/omap3som/omap3logic.c
@@ -47,9 +47,9 @@ DECLARE_GLOBAL_DATA_PTR;
  */
 
 static const struct ns16550_platdata omap3logic_serial = {
-	OMAP34XX_UART1,
-	2,
-	V_NS16550_CLK
+	.base = OMAP34XX_UART1,
+	.reg_shift = 2,
+	.clock = V_NS16550_CLK
 };
 
 U_BOOT_DEVICE(omap3logic_uart) = {
diff --git a/board/logicpd/zoom1/zoom1.c b/board/logicpd/zoom1/zoom1.c
index 4040114..982619c 100644
--- a/board/logicpd/zoom1/zoom1.c
+++ b/board/logicpd/zoom1/zoom1.c
@@ -44,9 +44,9 @@ static const u32 gpmc_lab_enet[] = {
 };
 
 static const struct ns16550_platdata zoom1_serial = {
-	OMAP34XX_UART3,
-	2,
-	V_NS16550_CLK
+	.base = OMAP34XX_UART3,
+	.reg_shift = 2,
+	.clock = V_NS16550_CLK
 };
 
 U_BOOT_DEVICE(zoom1_uart) = {
diff --git a/board/overo/overo.c b/board/overo/overo.c
index a38b959..40f13e5 100644
--- a/board/overo/overo.c
+++ b/board/overo/overo.c
@@ -68,9 +68,9 @@ static struct {
 } expansion_config = {0x0};
 
 static const struct ns16550_platdata overo_serial = {
-	OMAP34XX_UART3,
-	2,
-	V_NS16550_CLK
+	.base = OMAP34XX_UART3,
+	.reg_shift = 2,
+	.clock = V_NS16550_CLK
 };
 
 U_BOOT_DEVICE(overo_uart) = {
diff --git a/board/quipos/cairo/cairo.c b/board/quipos/cairo/cairo.c
index 21793e8..77e4482 100644
--- a/board/quipos/cairo/cairo.c
+++ b/board/quipos/cairo/cairo.c
@@ -91,9 +91,9 @@ void get_board_mem_timings(struct board_sdrc_timings *timings)
 #endif
 
 static const struct ns16550_platdata cairo_serial = {
-	OMAP34XX_UART2,
-	2,
-	V_NS16550_CLK
+	.base = OMAP34XX_UART2,
+	.reg_shift = 2,
+	.clock = V_NS16550_CLK
 };
 
 U_BOOT_DEVICE(cairo_uart) = {
diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
index ff317ef..0ed4f52 100644
--- a/board/ti/beagle/beagle.c
+++ b/board/ti/beagle/beagle.c
@@ -73,9 +73,9 @@ static struct {
 } expansion_config;
 
 static const struct ns16550_platdata beagle_serial = {
-	OMAP34XX_UART3,
-	2,
-	V_NS16550_CLK
+	.base = OMAP34XX_UART3,
+	.reg_shift = 2,
+	.clock = V_NS16550_CLK
 };
 
 U_BOOT_DEVICE(beagle_uart) = {
diff --git a/board/timll/devkit8000/devkit8000.c b/board/timll/devkit8000/devkit8000.c
index 1a447c7..965252f 100644
--- a/board/timll/devkit8000/devkit8000.c
+++ b/board/timll/devkit8000/devkit8000.c
@@ -46,9 +46,9 @@ static u32 gpmc_net_config[GPMC_MAX_REG] = {
 };
 
 static const struct ns16550_platdata devkit8000_serial = {
-	OMAP34XX_UART3,
-	2,
-	V_NS16550_CLK
+	.base = OMAP34XX_UART3,
+	.reg_shift = 2,
+	.clock = V_NS16550_CLK
 };
 
 U_BOOT_DEVICE(devkit8000_uart) = {
-- 
1.9.1

             reply	other threads:[~2016-03-01 23:23 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-03-01 23:23 Adam Ford [this message]
2016-03-02  0:01 ` [U-Boot] [PATCH V4] OMAP3: Various: Future-proof serial platdata Alexander Graf
2016-03-02  0:05   ` Adam Ford
2016-03-02  0:31     ` Alexander Graf
2016-03-02 11:29   ` Adam Ford
2016-03-02 15:13     ` Alexander Graf
2016-03-03 15:44       ` Adam Ford

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1456874609-29666-1-git-send-email-aford173@gmail.com \
    --to=aford173@gmail.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.