From: Richard Purdie <richard.purdie@linuxfoundation.org>
To: openembedded-core <openembedded-core@lists.openembedded.org>
Subject: [PATCH] linuxloader/image-prelink/image-mklibs: Fix non-standard path prelinking
Date: Fri, 04 Mar 2016 16:28:40 +0000 [thread overview]
Message-ID: <1457108920.2804.44.camel@linuxfoundation.org> (raw)
Prelinking on x86-64 wasn't working out the box as it uses /lib and
not /lib64 for libs. Prelink was refusing to link as the dynamic loader
didn't match its idea of the right path. Passing in the --dyanmic-linker
option avoids this.
We can share code from image-mklibs so abstract that into a new class,
linuxloader.bbclass.
This does break prelinking of multilib images, I've opened a bug so we
can loop back and fix that problem, the code would need to iterate the
dynamic loaders (and setup ld.so.conf files for it).
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
diff --git a/meta/classes/image-mklibs.bbclass b/meta/classes/image-mklibs.bbclass
index cfb3ffc..45a66fb 100644
--- a/meta/classes/image-mklibs.bbclass
+++ b/meta/classes/image-mklibs.bbclass
@@ -2,6 +2,8 @@ do_rootfs[depends] += "mklibs-native:do_populate_sysroot"
IMAGE_PREPROCESS_COMMAND += "mklibs_optimize_image; "
+inherit linuxloader
+
mklibs_optimize_image_doit() {
rm -rf ${WORKDIR}/mklibs
mkdir -p ${WORKDIR}/mklibs/dest
@@ -15,26 +17,8 @@ mklibs_optimize_image_doit() {
| sed "s+^\./++" \
> ${WORKDIR}/mklibs/executables.list
- case ${TARGET_ARCH} in
- powerpc | mips | mipsel | microblaze )
- dynamic_loader="${base_libdir}/ld.so.1"
- ;;
- powerpc64)
- dynamic_loader="${base_libdir}/ld64.so.1"
- ;;
- x86_64)
- dynamic_loader="${base_libdir}/ld-linux-x86-64.so.2"
- ;;
- i*86 )
- dynamic_loader="${base_libdir}/ld-linux.so.2"
- ;;
- arm )
- dynamic_loader="${base_libdir}/ld-linux.so.3"
- ;;
- * )
- dynamic_loader="/unknown_dynamic_linker"
- ;;
- esac
+ # Set $dynamic_loader
+ linuxloader
mklibs -v \
--ldlib ${dynamic_loader} \
diff --git a/meta/classes/image-prelink.bbclass b/meta/classes/image-prelink.bbclass
index 53c4b0b..3fe097b 100644
--- a/meta/classes/image-prelink.bbclass
+++ b/meta/classes/image-prelink.bbclass
@@ -6,6 +6,8 @@ python prelink_setup () {
oe.utils.write_ld_so_conf(d)
}
+inherit linuxloader
+
prelink_image () {
# export PSEUDO_DEBUG=4
# /bin/env | /bin/grep PSEUDO
@@ -31,8 +33,11 @@ prelink_image () {
fi
cat ${STAGING_DIR_TARGET}${sysconfdir}/ld.so.conf >> $ldsoconf
+ # Set $dynamic_loader
+ linuxloader
+
# prelink!
- ${STAGING_DIR_NATIVE}${sbindir_native}/prelink --root ${IMAGE_ROOTFS} -amR -N -c ${sysconfdir}/prelink.conf
+ ${STAGING_DIR_NATIVE}${sbindir_native}/prelink --root ${IMAGE_ROOTFS} -amR -N -c ${sysconfdir}/prelink.conf --dynamic-linker $dynamic_loader
# Remove the prelink.conf if we had to add it.
if [ "$dummy_prelink_conf" = "true" ]; then
diff --git a/meta/classes/linuxloader.bbclass b/meta/classes/linuxloader.bbclass
new file mode 100644
index 0000000..af649cc
--- /dev/null
+++ b/meta/classes/linuxloader.bbclass
@@ -0,0 +1,23 @@
+
+linuxloader () {
+ case ${TARGET_ARCH} in
+ powerpc | mips | mipsel | microblaze )
+ dynamic_loader="${base_libdir}/ld.so.1"
+ ;;
+ powerpc64)
+ dynamic_loader="${base_libdir}/ld64.so.1"
+ ;;
+ x86_64)
+ dynamic_loader="${base_libdir}/ld-linux-x86-64.so.2"
+ ;;
+ i*86 )
+ dynamic_loader="${base_libdir}/ld-linux.so.2"
+ ;;
+ arm )
+ dynamic_loader="${base_libdir}/ld-linux.so.3"
+ ;;
+ * )
+ dynamic_loader="/unknown_dynamic_linker"
+ ;;
+ esac
+}
next reply other threads:[~2016-03-04 16:28 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-04 16:28 Richard Purdie [this message]
2016-03-04 22:26 ` [PATCH] linuxloader/image-prelink/image-mklibs: Fix non-standard path prelinking Khem Raj
-- strict thread matches above, loose matches on Subject: below --
2015-09-29 13:27 Richard Purdie
2015-09-29 17:09 ` Khem Raj
2016-03-04 17:23 ` Christopher Larson
2016-03-04 22:09 ` Dan McGregor
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1457108920.2804.44.camel@linuxfoundation.org \
--to=richard.purdie@linuxfoundation.org \
--cc=openembedded-core@lists.openembedded.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.