From: Stuart Yoder <stuart.yoder@nxp.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 7/7 v4] pci/layerscape: set LUT and msi-map for discovered PCI devices
Date: Tue, 8 Mar 2016 09:35:57 -0600 [thread overview]
Message-ID: <1457451357-14000-8-git-send-email-stuart.yoder@nxp.com> (raw)
In-Reply-To: <1457451357-14000-1-git-send-email-stuart.yoder@nxp.com>
From: Stuart Yoder <stuart.yoder@nxp.com>
for all PCI devices discovered in a system:
-allocate a LUT (look-up-table) entry in that PCI controller
-allocate a stream ID for the device
-program and enable a LUT entry (maps PCI requester id to stream ID)
-set the msi-map property on the controller reflecting the
LUT mapping
basic bus scanning loop/logic was taken from drivers/pci/pci.c
pci_hose_scan_bus().
Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com>
---
-v4: no changes
drivers/pci/pcie_layerscape.c | 64 +++++++++++++++++++++++++++++++++++++++++
1 file changed, 64 insertions(+)
diff --git a/drivers/pci/pcie_layerscape.c b/drivers/pci/pcie_layerscape.c
index c3dc911..2aa415a 100644
--- a/drivers/pci/pcie_layerscape.c
+++ b/drivers/pci/pcie_layerscape.c
@@ -562,6 +562,66 @@ static void fdt_pcie_set_msi_map_entry(void *blob, struct ls_pcie *pcie,
fdt_appendprop_u32(blob, nodeoffset, "msi-map", streamid);
fdt_appendprop_u32(blob, nodeoffset, "msi-map", 1);
}
+
+static void fdt_fixup_pcie(void *blob)
+{
+ unsigned int found_multi = 0;
+ unsigned char header_type;
+ int index;
+ u32 streamid;
+ pci_dev_t dev;
+ int bus;
+ unsigned short id;
+ struct pci_controller *hose;
+ struct ls_pcie *pcie;
+ int i;
+
+ for (i = 0, hose = pci_get_hose_head(); hose; hose = hose->next, i++) {
+ pcie = hose->priv_data;
+ for (bus = hose->first_busno; bus <= hose->last_busno; bus++) {
+
+ for (dev = PCI_BDF(bus, 0, 0);
+ dev < PCI_BDF(bus, PCI_MAX_PCI_DEVICES - 1,
+ PCI_MAX_PCI_FUNCTIONS - 1);
+ dev += PCI_BDF(0, 0, 1)) {
+
+ if (PCI_FUNC(dev) && !found_multi)
+ continue;
+
+ pci_read_config_word(dev, PCI_VENDOR_ID, &id);
+
+ pci_read_config_byte(dev, PCI_HEADER_TYPE,
+ &header_type);
+
+ if ((id == 0xFFFF) || (id == 0x0000))
+ continue;
+
+ if (!PCI_FUNC(dev))
+ found_multi = header_type & 0x80;
+
+ streamid = ls_pcie_next_streamid();
+ if (streamid == 0xffffffff) {
+ printf("ERROR: no stream ids free\n");
+ continue;
+ }
+
+ index = ls_pcie_next_lut_index(pcie);
+ if (index < 0) {
+ printf("ERROR: no LUT indexes free\n");
+ continue;
+ }
+
+ /* map PCI b.d.f to streamID in LUT */
+ ls_pcie_lut_set_mapping(pcie, index, dev >> 8,
+ streamid);
+
+ /* update msi-map in device tree */
+ fdt_pcie_set_msi_map_entry(blob, pcie, dev >> 8,
+ streamid);
+ }
+ }
+ }
+}
#endif
int ls_pcie_init_ctrl(int busno, enum srds_prtcl dev, struct ls_pcie_info *info)
@@ -740,6 +800,10 @@ void ft_pci_setup(void *blob, bd_t *bd)
#ifdef CONFIG_PCIE4
ft_pcie_ls_setup(blob, FSL_PCIE_COMPAT, CONFIG_SYS_PCIE4_ADDR, PCIE4);
#endif
+
+ #if defined(CONFIG_LS2080A) || defined(CONFIG_LS2085A)
+ fdt_fixup_pcie(blob);
+ #endif
}
#else
--
1.7.9.5
prev parent reply other threads:[~2016-03-08 15:35 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-08 15:35 [U-Boot] [PATCH 0/7 v4] support mapping PCI device ids to stream ids for MSIs Stuart Yoder
2016-03-08 15:35 ` [U-Boot] [PATCH 1/7 v4] armv8: ls2080a: remove obsolete stream ID partitioning support Stuart Yoder
2016-03-08 15:35 ` [U-Boot] [PATCH 3/7 v4] pci: make pci_get_hose_head() available to external users Stuart Yoder
2016-03-08 15:35 ` [U-Boot] [PATCH 4/7 v4] pci/layerscape: add support for LUT Stuart Yoder
2016-03-08 17:30 ` york sun
2016-03-08 19:36 ` Stuart Yoder
2016-03-08 19:45 ` york sun
2016-03-08 19:58 ` Stuart Yoder
2016-03-08 15:35 ` [U-Boot] [PATCH 5/7 v4] pci/layerscape: add stream ID allocator Stuart Yoder
2016-03-08 15:35 ` [U-Boot] [PATCH 6/7 v4] pci/layerscape: fdt: function to set msi-map entries Stuart Yoder
2016-03-08 15:35 ` Stuart Yoder [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1457451357-14000-8-git-send-email-stuart.yoder@nxp.com \
--to=stuart.yoder@nxp.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.