From: <gregkh@linuxfoundation.org>
To: lokeshvutla@ti.com, d-gerlach@ti.com, gregkh@linuxfoundation.org,
mugunthanvnm@ti.com, nsekhar@ti.com, paul@pwsan.com,
robh@kernel.org, rogerq@ti.com
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "ARM: OMAP2+: hwmod: Introduce ti,no-idle dt property" has been added to the 4.4-stable tree
Date: Fri, 11 Mar 2016 23:04:23 -0800 [thread overview]
Message-ID: <145776626322371@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
ARM: OMAP2+: hwmod: Introduce ti,no-idle dt property
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
arm-omap2-hwmod-introduce-ti-no-idle-dt-property.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From 2e18f5a1bc18e8af7031b3b26efde25307014837 Mon Sep 17 00:00:00 2001
From: Lokesh Vutla <lokeshvutla@ti.com>
Date: Mon, 7 Mar 2016 01:41:21 -0700
Subject: ARM: OMAP2+: hwmod: Introduce ti,no-idle dt property
From: Lokesh Vutla <lokeshvutla@ti.com>
commit 2e18f5a1bc18e8af7031b3b26efde25307014837 upstream.
Introduce a dt property, ti,no-idle, that prevents an IP to idle at any
point. This is to handle Errata i877, which tells that GMAC clocks
cannot be disabled.
Acked-by: Roger Quadros <rogerq@ti.com>
Tested-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
Documentation/devicetree/bindings/arm/omap/omap.txt | 1 +
arch/arm/mach-omap2/omap_hwmod.c | 9 ++++++++-
arch/arm/mach-omap2/omap_hwmod.h | 3 +++
3 files changed, 12 insertions(+), 1 deletion(-)
--- a/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -23,6 +23,7 @@ Optional properties:
during suspend.
- ti,no-reset-on-init: When present, the module should not be reset at init
- ti,no-idle-on-init: When present, the module should not be idled at init
+- ti,no-idle: When present, the module is never allowed to idle.
Example:
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -2200,6 +2200,11 @@ static int _enable(struct omap_hwmod *oh
*/
static int _idle(struct omap_hwmod *oh)
{
+ if (oh->flags & HWMOD_NO_IDLE) {
+ oh->_int_flags |= _HWMOD_SKIP_ENABLE;
+ return 0;
+ }
+
pr_debug("omap_hwmod: %s: idling\n", oh->name);
if (oh->_state != _HWMOD_STATE_ENABLED) {
@@ -2504,6 +2509,8 @@ static int __init _init(struct omap_hwmo
oh->flags |= HWMOD_INIT_NO_RESET;
if (of_find_property(np, "ti,no-idle-on-init", NULL))
oh->flags |= HWMOD_INIT_NO_IDLE;
+ if (of_find_property(np, "ti,no-idle", NULL))
+ oh->flags |= HWMOD_NO_IDLE;
}
oh->_state = _HWMOD_STATE_INITIALIZED;
@@ -2630,7 +2637,7 @@ static void __init _setup_postsetup(stru
* XXX HWMOD_INIT_NO_IDLE does not belong in hwmod data -
* it should be set by the core code as a runtime flag during startup
*/
- if ((oh->flags & HWMOD_INIT_NO_IDLE) &&
+ if ((oh->flags & (HWMOD_INIT_NO_IDLE | HWMOD_NO_IDLE)) &&
(postsetup_state == _HWMOD_STATE_IDLE)) {
oh->_int_flags |= _HWMOD_SKIP_ENABLE;
postsetup_state = _HWMOD_STATE_ENABLED;
--- a/arch/arm/mach-omap2/omap_hwmod.h
+++ b/arch/arm/mach-omap2/omap_hwmod.h
@@ -525,6 +525,8 @@ struct omap_hwmod_omap4_prcm {
* or idled.
* HWMOD_OPT_CLKS_NEEDED: The optional clocks are needed for the module to
* operate and they need to be handled at the same time as the main_clk.
+ * HWMOD_NO_IDLE: Do not idle the hwmod at all. Useful to handle certain
+ * IPs like CPSW on DRA7, where clocks to this module cannot be disabled.
*/
#define HWMOD_SWSUP_SIDLE (1 << 0)
#define HWMOD_SWSUP_MSTANDBY (1 << 1)
@@ -541,6 +543,7 @@ struct omap_hwmod_omap4_prcm {
#define HWMOD_SWSUP_SIDLE_ACT (1 << 12)
#define HWMOD_RECONFIG_IO_CHAIN (1 << 13)
#define HWMOD_OPT_CLKS_NEEDED (1 << 14)
+#define HWMOD_NO_IDLE (1 << 15)
/*
* omap_hwmod._int_flags definitions
Patches currently in stable-queue which might be from lokeshvutla@ti.com are
queue-4.4/arm-omap2-hwmod-introduce-ti-no-idle-dt-property.patch
queue-4.4/arm-dts-dra7-do-not-gate-cpsw-clock-due-to-errata-i877.patch
next reply other threads:[~2016-03-12 7:04 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-12 7:04 gregkh [this message]
2016-03-12 13:39 ` Patch "ARM: OMAP2+: hwmod: Introduce ti,no-idle dt property" has been added to the 4.4-stable tree Paul Walmsley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=145776626322371@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=d-gerlach@ti.com \
--cc=lokeshvutla@ti.com \
--cc=mugunthanvnm@ti.com \
--cc=nsekhar@ti.com \
--cc=paul@pwsan.com \
--cc=robh@kernel.org \
--cc=rogerq@ti.com \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.