From: <gregkh@linuxfoundation.org>
To: ckeepax@opensource.wolfsonmicro.com, broonie@kernel.org,
gregkh@linuxfoundation.org, linux.amoon@gmail.com
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "ASoC: samsung: Use IRQ safe spin lock calls" has been added to the 4.4-stable tree
Date: Fri, 11 Mar 2016 23:04:25 -0800 [thread overview]
Message-ID: <1457766265195246@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
ASoC: samsung: Use IRQ safe spin lock calls
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
asoc-samsung-use-irq-safe-spin-lock-calls.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From 316fa9e09ad76e095b9d7e9350c628b918370a22 Mon Sep 17 00:00:00 2001
From: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Date: Thu, 18 Feb 2016 15:47:13 +0000
Subject: ASoC: samsung: Use IRQ safe spin lock calls
From: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
commit 316fa9e09ad76e095b9d7e9350c628b918370a22 upstream.
Lockdep warns of a potential lock inversion, i2s->lock is held numerous
times whilst we are under the substream lock (snd_pcm_stream_lock). If
we use the IRQ unsafe spin lock calls, you can also end up locking
snd_pcm_stream_lock whilst under i2s->lock (if an IRQ happens whilst we
are holding i2s->lock). This could result in deadlock.
[ 18.147001] CPU0 CPU1
[ 18.151509] ---- ----
[ 18.156022] lock(&(&pri_dai->spinlock)->rlock);
[ 18.160701] local_irq_disable();
[ 18.166622] lock(&(&substream->self_group.lock)->rlock);
[ 18.174595] lock(&(&pri_dai->spinlock)->rlock);
[ 18.181806] <Interrupt>
[ 18.184408] lock(&(&substream->self_group.lock)->rlock);
[ 18.190045]
[ 18.190045] *** DEADLOCK ***
This patch changes to using the irq safe spinlock calls, to avoid this
issue.
Fixes: ce8bcdbb61d9 ("ASoC: samsung: i2s: Protect more registers with a spinlock")
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/soc/samsung/i2s.c | 21 ++++++++++++---------
1 file changed, 12 insertions(+), 9 deletions(-)
--- a/sound/soc/samsung/i2s.c
+++ b/sound/soc/samsung/i2s.c
@@ -480,10 +480,11 @@ static int i2s_set_sysclk(struct snd_soc
unsigned int cdcon_mask = 1 << i2s_regs->cdclkcon_off;
unsigned int rsrc_mask = 1 << i2s_regs->rclksrc_off;
u32 mod, mask, val = 0;
+ unsigned long flags;
- spin_lock(i2s->lock);
+ spin_lock_irqsave(i2s->lock, flags);
mod = readl(i2s->addr + I2SMOD);
- spin_unlock(i2s->lock);
+ spin_unlock_irqrestore(i2s->lock, flags);
switch (clk_id) {
case SAMSUNG_I2S_OPCLK:
@@ -574,11 +575,11 @@ static int i2s_set_sysclk(struct snd_soc
return -EINVAL;
}
- spin_lock(i2s->lock);
+ spin_lock_irqsave(i2s->lock, flags);
mod = readl(i2s->addr + I2SMOD);
mod = (mod & ~mask) | val;
writel(mod, i2s->addr + I2SMOD);
- spin_unlock(i2s->lock);
+ spin_unlock_irqrestore(i2s->lock, flags);
return 0;
}
@@ -589,6 +590,7 @@ static int i2s_set_fmt(struct snd_soc_da
struct i2s_dai *i2s = to_info(dai);
int lrp_shift, sdf_shift, sdf_mask, lrp_rlow, mod_slave;
u32 mod, tmp = 0;
+ unsigned long flags;
lrp_shift = i2s->variant_regs->lrp_off;
sdf_shift = i2s->variant_regs->sdf_off;
@@ -648,7 +650,7 @@ static int i2s_set_fmt(struct snd_soc_da
return -EINVAL;
}
- spin_lock(i2s->lock);
+ spin_lock_irqsave(i2s->lock, flags);
mod = readl(i2s->addr + I2SMOD);
/*
* Don't change the I2S mode if any controller is active on this
@@ -656,7 +658,7 @@ static int i2s_set_fmt(struct snd_soc_da
*/
if (any_active(i2s) &&
((mod & (sdf_mask | lrp_rlow | mod_slave)) != tmp)) {
- spin_unlock(i2s->lock);
+ spin_unlock_irqrestore(i2s->lock, flags);
dev_err(&i2s->pdev->dev,
"%s:%d Other DAI busy\n", __func__, __LINE__);
return -EAGAIN;
@@ -665,7 +667,7 @@ static int i2s_set_fmt(struct snd_soc_da
mod &= ~(sdf_mask | lrp_rlow | mod_slave);
mod |= tmp;
writel(mod, i2s->addr + I2SMOD);
- spin_unlock(i2s->lock);
+ spin_unlock_irqrestore(i2s->lock, flags);
return 0;
}
@@ -675,6 +677,7 @@ static int i2s_hw_params(struct snd_pcm_
{
struct i2s_dai *i2s = to_info(dai);
u32 mod, mask = 0, val = 0;
+ unsigned long flags;
if (!is_secondary(i2s))
mask |= (MOD_DC2_EN | MOD_DC1_EN);
@@ -743,11 +746,11 @@ static int i2s_hw_params(struct snd_pcm_
return -EINVAL;
}
- spin_lock(i2s->lock);
+ spin_lock_irqsave(i2s->lock, flags);
mod = readl(i2s->addr + I2SMOD);
mod = (mod & ~mask) | val;
writel(mod, i2s->addr + I2SMOD);
- spin_unlock(i2s->lock);
+ spin_unlock_irqrestore(i2s->lock, flags);
samsung_asoc_init_dma_data(dai, &i2s->dma_playback, &i2s->dma_capture);
Patches currently in stable-queue which might be from ckeepax@opensource.wolfsonmicro.com are
queue-4.4/asoc-samsung-use-irq-safe-spin-lock-calls.patch
reply other threads:[~2016-03-12 7:04 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1457766265195246@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=broonie@kernel.org \
--cc=ckeepax@opensource.wolfsonmicro.com \
--cc=linux.amoon@gmail.com \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.