From: Imre Deak <imre.deak@intel.com>
To: ville.syrjala@linux.intel.com, intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH 2/3] drm/i915: Set GPU freq to idle_freq initially
Date: Wed, 16 Mar 2016 19:56:58 +0200 [thread overview]
Message-ID: <1458151018.4473.49.camel@intel.com> (raw)
In-Reply-To: <1457120584-26080-3-git-send-email-ville.syrjala@linux.intel.com>
On Fri, 2016-03-04 at 21:43 +0200, ville.syrjala@linux.intel.com wrote:
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
>
> Currently we set the initial GPU frequency to min_freq_softlimit
> on gen9, and to efficient_freq on VLV/CHV. On all the other platforms
> we set it to idle_freq. Let's use idle_freq across the board to make
> sure we don't waste power. This is especially relevant for VLV since
> Vnn won't drop to minimum unless the GPU is at the minimum frequency.
>
> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Yes, I think having the same logic on all platforms make sense, so:
Reviewed-by: Imre Deak <imre.deak@intel.com>
I noticed that rps.min_freq is always the same as rps.idle_freq, what's
the reason to have both, could we remove one of them? Adding Chris.
> ---
> drivers/gpu/drm/i915/intel_pm.c | 14 +++++++-------
> 1 file changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> index c53b8c4d381c..2591d533a895 100644
> --- a/drivers/gpu/drm/i915/intel_pm.c
> +++ b/drivers/gpu/drm/i915/intel_pm.c
> @@ -4804,7 +4804,7 @@ static void gen9_enable_rps(struct drm_device *dev)
> * Up/Down EI & threshold registers, as well as the RP_CONTROL,
> * RP_INTERRUPT_LIMITS & RPNSWREQ registers */
> dev_priv->rps.power = HIGH_POWER; /* force a reset */
> - gen6_set_rps(dev_priv->dev, dev_priv->rps.min_freq_softlimit);
> + gen6_set_rps(dev_priv->dev, dev_priv->rps.idle_freq);
>
> intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
> }
> @@ -5594,10 +5594,10 @@ static void cherryview_enable_rps(struct drm_device *dev)
> dev_priv->rps.cur_freq);
>
> DRM_DEBUG_DRIVER("setting GPU freq to %d MHz (%u)\n",
> - intel_gpu_freq(dev_priv, dev_priv->rps.efficient_freq),
> - dev_priv->rps.efficient_freq);
> + intel_gpu_freq(dev_priv, dev_priv->rps.idle_freq),
> + dev_priv->rps.idle_freq);
>
> - valleyview_set_rps(dev_priv->dev, dev_priv->rps.efficient_freq);
> + valleyview_set_rps(dev_priv->dev, dev_priv->rps.idle_freq);
>
> intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
> }
> @@ -5684,10 +5684,10 @@ static void valleyview_enable_rps(struct drm_device *dev)
> dev_priv->rps.cur_freq);
>
> DRM_DEBUG_DRIVER("setting GPU freq to %d MHz (%u)\n",
> - intel_gpu_freq(dev_priv, dev_priv->rps.efficient_freq),
> - dev_priv->rps.efficient_freq);
> + intel_gpu_freq(dev_priv, dev_priv->rps.idle_freq),
> + dev_priv->rps.idle_freq);
>
> - valleyview_set_rps(dev_priv->dev, dev_priv->rps.efficient_freq);
> + valleyview_set_rps(dev_priv->dev, dev_priv->rps.idle_freq);
>
> intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
> }
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2016-03-16 17:57 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-04 19:43 [PATCH 0/3] drm/i915: Some GT freq stuff ville.syrjala
2016-03-04 19:43 ` [PATCH 1/3] drm/i915: Use GPLL ref clock to calculate GPU freqs on VLV/CHV ville.syrjala
2016-03-16 17:17 ` Imre Deak
2016-03-16 17:47 ` Ville Syrjälä
2016-03-16 17:51 ` Imre Deak
2016-04-05 19:09 ` Ville Syrjälä
2016-03-04 19:43 ` [PATCH 2/3] drm/i915: Set GPU freq to idle_freq initially ville.syrjala
2016-03-16 17:56 ` Imre Deak [this message]
2016-03-16 18:05 ` Chris Wilson
2016-03-04 19:43 ` [PATCH 3/3] drm/i915: Drop locking/rpm resume/flush_delayed_work for cur/min/max freq sysfs read ville.syrjala
2016-03-16 18:07 ` Imre Deak
2016-03-16 18:16 ` Ville Syrjälä
2016-03-07 10:34 ` ✗ Fi.CI.BAT: failure for drm/i915: Some GT freq stuff Patchwork
2016-03-07 15:07 ` Ville Syrjälä
2016-03-07 17:57 ` Ville Syrjälä
2016-03-07 18:57 ` [PATCH 4/3] drm/i915: Read RPS frequencies earlier on non-VLV/CHV ville.syrjala
2016-03-08 0:49 ` O'Rourke, Tom
2016-03-08 13:34 ` Ville Syrjälä
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1458151018.4473.49.camel@intel.com \
--to=imre.deak@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=ville.syrjala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.