From: Bin Meng <bmeng.cn@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 2/3] net: Move CONFIG_RTL8139 to Kconfig
Date: Mon, 21 Mar 2016 06:47:41 -0700 [thread overview]
Message-ID: <1458568062-3965-2-git-send-email-bmeng.cn@gmail.com> (raw)
In-Reply-To: <1458568062-3965-1-git-send-email-bmeng.cn@gmail.com>
Introduce CONFIG_RTL8139 in Kconfig and move over boards' defconfig
to use that.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
---
Changes in v2: None
configs/MPC8544DS_defconfig | 1 +
drivers/net/Kconfig | 6 ++++++
include/configs/MPC8536DS.h | 1 -
include/configs/MPC8544DS.h | 1 -
include/configs/MPC8572DS.h | 1 -
include/configs/MPC8641HPCN.h | 1 -
include/configs/r2dplus.h | 5 -----
7 files changed, 7 insertions(+), 9 deletions(-)
diff --git a/configs/MPC8544DS_defconfig b/configs/MPC8544DS_defconfig
index 9790d8a..8937682 100644
--- a/configs/MPC8544DS_defconfig
+++ b/configs/MPC8544DS_defconfig
@@ -5,5 +5,6 @@ CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_NETDEVICES=y
CONFIG_E1000=y
+CONFIG_RTL8139=y
CONFIG_SYS_NS16550=y
CONFIG_OF_LIBFDT=y
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index bc2f51d..3ac6b66 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -102,6 +102,12 @@ config PCH_GBE
This MAC is present in Intel Platform Controller Hub EG20T. It
supports 10/100/1000 Mbps operation.
+config RTL8139
+ bool "Realtek 8139 series Ethernet controller driver"
+ help
+ This driver supports Realtek 8139 series fast ethernet family of
+ PCI chipsets/adapters.
+
config XILINX_AXIEMAC
depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP)
select PHYLIB
diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h
index 9298c30..980cb99 100644
--- a/include/configs/MPC8536DS.h
+++ b/include/configs/MPC8536DS.h
@@ -527,7 +527,6 @@
#undef CONFIG_EEPRO100
#undef CONFIG_TULIP
-#undef CONFIG_RTL8139
#ifndef CONFIG_PCI_PNP
#define PCI_ENET0_IOADDR CONFIG_SYS_PCI1_IO_BUS
diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h
index 494c46f..2372d5f 100644
--- a/include/configs/MPC8544DS.h
+++ b/include/configs/MPC8544DS.h
@@ -298,7 +298,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#undef CONFIG_EEPRO100
#undef CONFIG_TULIP
-#define CONFIG_RTL8139
#ifndef CONFIG_PCI_PNP
#define PCI_ENET0_IOADDR CONFIG_SYS_PCI1_IO_BUS
diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h
index cfcd5b9..95f59e0 100644
--- a/include/configs/MPC8572DS.h
+++ b/include/configs/MPC8572DS.h
@@ -490,7 +490,6 @@
#undef CONFIG_EEPRO100
#undef CONFIG_TULIP
-#undef CONFIG_RTL8139
#ifndef CONFIG_PCI_PNP
#define PCI_ENET0_IOADDR CONFIG_SYS_PCIE3_IO_BUS
diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h
index bd0a3f5..1f4ed2a 100644
--- a/include/configs/MPC8641HPCN.h
+++ b/include/configs/MPC8641HPCN.h
@@ -362,7 +362,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
#define CONFIG_PCI_PNP /* do pci plug-and-play */
-#define CONFIG_RTL8139
#undef CONFIG_EEPRO100
#undef CONFIG_TULIP
diff --git a/include/configs/r2dplus.h b/include/configs/r2dplus.h
index 2d1e56a..82e7a89 100644
--- a/include/configs/r2dplus.h
+++ b/include/configs/r2dplus.h
@@ -110,9 +110,4 @@
#define CONFIG_PCI_SYS_PHYS (CONFIG_SYS_SDRAM_BASE & 0x1fffffff)
#define CONFIG_PCI_SYS_SIZE CONFIG_SYS_SDRAM_SIZE
-/*
- * Network device (RTL8139) support
- */
-#define CONFIG_RTL8139
-
#endif /* __CONFIG_H */
--
1.8.2.1
next prev parent reply other threads:[~2016-03-21 13:47 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-21 13:47 [U-Boot] [PATCH v2 1/3] defconfig: Reorder boards' defconfig files Bin Meng
2016-03-21 13:47 ` Bin Meng [this message]
2016-03-21 16:25 ` [U-Boot] [PATCH v2 2/3] net: Move CONFIG_RTL8139 to Kconfig Joe Hershberger
2016-03-21 17:01 ` Scott Wood
2016-03-22 2:14 ` Bin Meng
2016-03-22 22:25 ` Joe Hershberger
2016-03-22 22:50 ` Tom Rini
2016-03-23 0:56 ` Bin Meng
2016-03-23 2:00 ` [U-Boot] [U-Boot,v2,2/3] " Tom Rini
2016-03-21 13:47 ` [U-Boot] [PATCH v2 3/3] net: Move CONFIG_RTL8169 " Bin Meng
2016-03-21 16:08 ` Stephen Warren
2016-03-21 16:27 ` Joe Hershberger
2016-03-23 2:00 ` [U-Boot] [U-Boot,v2,3/3] " Tom Rini
2016-03-21 16:26 ` [U-Boot] [PATCH v2 1/3] defconfig: Reorder boards' defconfig files Joe Hershberger
2016-03-23 2:00 ` [U-Boot] [U-Boot, v2, " Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1458568062-3965-2-git-send-email-bmeng.cn@gmail.com \
--to=bmeng.cn@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.