From: Maxim Zhukov <mussitantesmortem@gmail.com>
To: davem@davemloft.net
Cc: linux@rainbow-software.org, netdev@vger.kernel.org,
linux-kernel@vger.kernel.org,
Maxim Zhukov <mussitantesmortem@gmail.com>
Subject: [PATCH 2/2] drivers: net: ethernet: dlink: dl2k: fix indent
Date: Wed, 23 Mar 2016 18:57:40 +0300 [thread overview]
Message-ID: <1458748660-10571-2-git-send-email-mussitantesmortem@gmail.com> (raw)
In-Reply-To: <1458748660-10571-1-git-send-email-mussitantesmortem@gmail.com>
This commit fixed indent in file. Labels must be start of the line
Signed-off-by: Maxim Zhukov <mussitantesmortem@gmail.com>
---
drivers/net/ethernet/dlink/dl2k.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/dlink/dl2k.c b/drivers/net/ethernet/dlink/dl2k.c
index d128306..e635b1e 100644
--- a/drivers/net/ethernet/dlink/dl2k.c
+++ b/drivers/net/ethernet/dlink/dl2k.c
@@ -98,7 +98,7 @@ static const struct ethtool_ops ethtool_ops;
static const struct net_device_ops netdev_ops = {
.ndo_open = rio_open,
- .ndo_start_xmit = start_xmit,
+ .ndo_start_xmit = start_xmit,
.ndo_stop = rio_close,
.ndo_get_stats = get_stats,
.ndo_validate_addr = eth_validate_addr,
@@ -174,7 +174,7 @@ rio_probe1(struct pci_dev *pdev, const struct pci_device_id *ent)
strcmp(media[card_idx], "0") == 0) {
np->an_enable = 2;
} else if (strcmp(media[card_idx], "100mbps_fd") == 0 ||
- strcmp(media[card_idx], "4") == 0) {
+ strcmp(media[card_idx], "4") == 0) {
np->speed = 100;
np->full_duplex = 1;
} else if (strcmp(media[card_idx], "100mbps_hd") == 0 ||
@@ -190,11 +190,11 @@ rio_probe1(struct pci_dev *pdev, const struct pci_device_id *ent)
np->speed = 10;
np->full_duplex = 0;
} else if (strcmp(media[card_idx], "1000mbps_fd") == 0 ||
- strcmp(media[card_idx], "6") == 0) {
+ strcmp(media[card_idx], "6") == 0) {
np->speed = 1000;
np->full_duplex = 1;
} else if (strcmp(media[card_idx], "1000mbps_hd") == 0 ||
- strcmp(media[card_idx], "5") == 0) {
+ strcmp(media[card_idx], "5") == 0) {
np->speed = 1000;
np->full_duplex = 0;
} else {
@@ -210,7 +210,7 @@ rio_probe1(struct pci_dev *pdev, const struct pci_device_id *ent)
dev->mtu = mtu[card_idx];
}
np->vlan = (vlan[card_idx] > 0 && vlan[card_idx] < 4096) ?
- vlan[card_idx] : 0;
+ vlan[card_idx] : 0;
if (rx_coalesce > 0 && rx_timeout > 0) {
np->rx_coalesce = rx_coalesce;
np->rx_timeout = rx_timeout;
@@ -278,12 +278,12 @@ rio_probe1(struct pci_dev *pdev, const struct pci_device_id *ent)
dev->name, np->name, dev->dev_addr, irq);
if (tx_coalesce > 1)
printk(KERN_INFO "tx_coalesce:\t%d packets\n",
- tx_coalesce);
+ tx_coalesce);
if (np->coalesce)
printk(KERN_INFO
"rx_coalesce:\t%d packets\n"
"rx_timeout: \t%d ns\n",
- np->rx_coalesce, np->rx_timeout * 640);
+ np->rx_coalesce, np->rx_timeout * 640);
if (np->vlan)
printk(KERN_INFO "vlan(id):\t%d\n", np->vlan);
return 0;
@@ -1470,7 +1470,7 @@ mii_read(struct net_device *dev, int phy_addr, int reg_num)
mii_getbit(dev);
return (retval >> 1) & 0xffff;
- err_out:
+err_out:
return 0;
}
static int
--
2.7.1.1.g3617aa0
next prev parent reply other threads:[~2016-03-23 15:58 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-23 15:57 [PATCH 1/2] net: ethernet: dlink: dl2k: fix code style Maxim Zhukov
2016-03-23 15:57 ` Maxim Zhukov [this message]
2016-03-23 17:34 ` [PATCH 2/2] drivers: net: ethernet: dlink: dl2k: fix indent Joe Perches
-- strict thread matches above, loose matches on Subject: below --
2016-03-23 14:36 [PATCH 1/2] net: ethernet: dlink: dl2k: fix code style Maxim Zhukov
2016-03-23 14:36 ` [PATCH 2/2] drivers: net: ethernet: dlink: dl2k: fix indent Maxim Zhukov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1458748660-10571-2-git-send-email-mussitantesmortem@gmail.com \
--to=mussitantesmortem@gmail.com \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@rainbow-software.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.