From: Jason Gerecke <killertofu@gmail.com>
To: linux-input@vger.kernel.org
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>,
Ping Cheng <pinglinux@gmail.com>, Jiri Kosina <jkosina@suse.cz>,
Jason Gerecke <killertofu@gmail.com>,
Jason Gerecke <jason.gerecke@wacom.com>
Subject: [PATCH v2 2/2] HID: wacom: Support switching from vendor-defined device mode on G9 and G11
Date: Mon, 4 Apr 2016 11:26:52 -0700 [thread overview]
Message-ID: <1459794412-10306-2-git-send-email-killertofu@gmail.com> (raw)
In-Reply-To: <1459794412-10306-1-git-send-email-killertofu@gmail.com>
A tablet PC booted into Windows may have its pen/touch hardware switched
into "Wacom mode" similar to what we do with explicitly-supported hardware.
Some devices appear to maintain this state across reboots, preventing their
use with the generic HID driver. This patch adds support for detecting the
presence of the mode switch feature report used by devices based on the G9
and G11 chips and has the HID codepath always attempt to reset the device
back to sending standard HID reports.
Fixes: https://sourceforge.net/p/linuxwacom/bugs/307/
Fixes: https://sourceforge.net/p/linuxwacom/bugs/310/
Fixes: https://github.com/linuxwacom/input-wacom/issues/15
Co-authored-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
---
Changes from v1:
* Incorporate Benjamin's feedback & suggested wacom_set_device_mode code
drivers/hid/wacom_sys.c | 100 ++++++++++++++++++++++++++++++++++--------------
drivers/hid/wacom_wac.h | 8 ++++
2 files changed, 80 insertions(+), 28 deletions(-)
diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c
index b338bbf..ccf1883 100644
--- a/drivers/hid/wacom_sys.c
+++ b/drivers/hid/wacom_sys.c
@@ -152,6 +152,25 @@ static void wacom_feature_mapping(struct hid_device *hdev,
hid_data->inputmode = field->report->id;
hid_data->inputmode_index = usage->usage_index;
break;
+
+ case HID_UP_DIGITIZER:
+ if (field->report->id == 0x0B &&
+ (field->application == WACOM_G9_DIGITIZER ||
+ field->application == WACOM_G11_DIGITIZER)) {
+ wacom->wacom_wac.mode_report = field->report->id;
+ wacom->wacom_wac.mode_value = 0;
+ }
+ break;
+
+ case WACOM_G9_PAGE:
+ case WACOM_G11_PAGE:
+ if (field->report->id == 0x03 &&
+ (field->application == WACOM_G9_TOUCHSCREEN ||
+ field->application == WACOM_G11_TOUCHSCREEN)) {
+ wacom->wacom_wac.mode_report = field->report->id;
+ wacom->wacom_wac.mode_value = 0;
+ }
+ break;
}
}
@@ -322,26 +341,41 @@ static int wacom_hid_set_device_mode(struct hid_device *hdev)
return 0;
}
-static int wacom_set_device_mode(struct hid_device *hdev, int report_id,
- int length, int mode)
+static int wacom_set_device_mode(struct hid_device *hdev,
+ struct wacom_wac *wacom_wac)
{
- unsigned char *rep_data;
+ u8 *rep_data;
+ struct hid_report *r;
+ struct hid_report_enum *re;
+ int length;
int error = -ENOMEM, limit = 0;
- rep_data = kzalloc(length, GFP_KERNEL);
+ if (wacom_wac->mode_report < 0)
+ return 0;
+
+ re = &(hdev->report_enum[HID_FEATURE_REPORT]);
+ r = re->report_id_hash[wacom_wac->mode_report];
+ if (!r)
+ return -EINVAL;
+
+ rep_data = hid_alloc_report_buf(r, GFP_KERNEL);
if (!rep_data)
- return error;
+ return -ENOMEM;
+
+ length = hid_report_len(r);
do {
- rep_data[0] = report_id;
- rep_data[1] = mode;
+ rep_data[0] = wacom_wac->mode_report;
+ rep_data[1] = wacom_wac->mode_value;
error = wacom_set_report(hdev, HID_FEATURE_REPORT, rep_data,
length, 1);
if (error >= 0)
error = wacom_get_report(hdev, HID_FEATURE_REPORT,
rep_data, length, 1);
- } while (error >= 0 && rep_data[1] != mode && limit++ < WAC_MSG_RETRIES);
+ } while (error >= 0 &&
+ rep_data[1] != wacom_wac->mode_report &&
+ limit++ < WAC_MSG_RETRIES);
kfree(rep_data);
@@ -411,32 +445,41 @@ static int wacom_bt_query_tablet_data(struct hid_device *hdev, u8 speed,
static int wacom_query_tablet_data(struct hid_device *hdev,
struct wacom_features *features)
{
+ struct wacom *wacom = hid_get_drvdata(hdev);
+ struct wacom_wac *wacom_wac = &wacom->wacom_wac;
+
if (hdev->bus == BUS_BLUETOOTH)
return wacom_bt_query_tablet_data(hdev, 1, features);
- if (features->type == HID_GENERIC)
- return wacom_hid_set_device_mode(hdev);
-
- if (features->device_type & WACOM_DEVICETYPE_TOUCH) {
- if (features->type > TABLETPC) {
- /* MT Tablet PC touch */
- return wacom_set_device_mode(hdev, 3, 4, 4);
- }
- else if (features->type == WACOM_24HDT) {
- return wacom_set_device_mode(hdev, 18, 3, 2);
- }
- else if (features->type == WACOM_27QHDT) {
- return wacom_set_device_mode(hdev, 131, 3, 2);
- }
- else if (features->type == BAMBOO_PAD) {
- return wacom_set_device_mode(hdev, 2, 2, 2);
- }
- } else if (features->device_type & WACOM_DEVICETYPE_PEN) {
- if (features->type <= BAMBOO_PT) {
- return wacom_set_device_mode(hdev, 2, 2, 2);
+ if (features->type != HID_GENERIC) {
+ if (features->device_type & WACOM_DEVICETYPE_TOUCH) {
+ if (features->type > TABLETPC) {
+ /* MT Tablet PC touch */
+ wacom_wac->mode_report = 3;
+ wacom_wac->mode_value = 4;
+ } else if (features->type == WACOM_24HDT) {
+ wacom_wac->mode_report = 18;
+ wacom_wac->mode_value = 2;
+ } else if (features->type == WACOM_27QHDT) {
+ wacom_wac->mode_report = 131;
+ wacom_wac->mode_value = 2;
+ } else if (features->type == BAMBOO_PAD) {
+ wacom_wac->mode_report = 2;
+ wacom_wac->mode_value = 2;
+ }
+ } else if (features->device_type & WACOM_DEVICETYPE_PEN) {
+ if (features->type <= BAMBOO_PT) {
+ wacom_wac->mode_report = 2;
+ wacom_wac->mode_value = 2;
+ }
}
}
+ wacom_set_device_mode(hdev, wacom_wac);
+
+ if (features->type == HID_GENERIC)
+ return wacom_hid_set_device_mode(hdev);
+
return 0;
}
@@ -1818,6 +1861,7 @@ static int wacom_probe(struct hid_device *hdev,
}
wacom_wac->hid_data.inputmode = -1;
+ wacom_wac->mode_report = -1;
wacom->usbdev = dev;
wacom->intf = intf;
diff --git a/drivers/hid/wacom_wac.h b/drivers/hid/wacom_wac.h
index 25baa7f..e2084d9 100644
--- a/drivers/hid/wacom_wac.h
+++ b/drivers/hid/wacom_wac.h
@@ -84,6 +84,12 @@
#define WACOM_DEVICETYPE_WL_MONITOR 0x0008
#define WACOM_VENDORDEFINED_PEN 0xff0d0001
+#define WACOM_G9_PAGE 0xff090000
+#define WACOM_G9_DIGITIZER (WACOM_G9_PAGE | 0x02)
+#define WACOM_G9_TOUCHSCREEN (WACOM_G9_PAGE | 0x11)
+#define WACOM_G11_PAGE 0xff110000
+#define WACOM_G11_DIGITIZER (WACOM_G11_PAGE | 0x02)
+#define WACOM_G11_TOUCHSCREEN (WACOM_G11_PAGE | 0x11)
#define WACOM_PEN_FIELD(f) (((f)->logical == HID_DG_STYLUS) || \
((f)->physical == HID_DG_STYLUS) || \
@@ -238,6 +244,8 @@ struct wacom_wac {
int ps_connected;
u8 bt_features;
u8 bt_high_speed;
+ int mode_report;
+ int mode_value;
struct hid_data hid_data;
};
--
2.7.3
next prev parent reply other threads:[~2016-04-04 18:27 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-28 20:10 [PATCH] HID: wacom: Support switching from vendor-defined input format on G9 and G11 Jason Gerecke
2016-03-29 7:05 ` Benjamin Tissoires
2016-03-29 17:15 ` Jason Gerecke
2016-03-30 9:24 ` Benjamin Tissoires
2016-03-31 20:13 ` Jason Gerecke
2016-04-04 18:26 ` [PATCH v2 1/2] HID: wacom: Initialize hid_data.inputmode to -1 Jason Gerecke
2016-04-04 18:26 ` Jason Gerecke [this message]
2016-04-04 20:54 ` [PATCH v2 2/2] HID: wacom: Support switching from vendor-defined device mode on G9 and G11 Benjamin Tissoires
2016-04-05 15:22 ` Jiri Kosina
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1459794412-10306-2-git-send-email-killertofu@gmail.com \
--to=killertofu@gmail.com \
--cc=benjamin.tissoires@redhat.com \
--cc=jason.gerecke@wacom.com \
--cc=jkosina@suse.cz \
--cc=linux-input@vger.kernel.org \
--cc=pinglinux@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.