From mboxrd@z Thu Jan 1 00:00:00 1970 From: Roger Quadros Date: Tue, 19 Apr 2016 10:17:01 +0300 Subject: [U-Boot] [PATCH 3/3] usb: s3c-otg: Fix remaining bytes in debug messages In-Reply-To: <1461050221-9268-1-git-send-email-rogerq@ti.com> References: <1461050221-9268-1-git-send-email-rogerq@ti.com> Message-ID: <1461050221-9268-4-git-send-email-rogerq@ti.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Remaining bytes means bytes that are not yet transferred and not the bytes that were transferred in the last transfer. Reported-by: Lukasz Majewski Signed-off-by: Roger Quadros --- drivers/usb/gadget/dwc2_udc_otg_xfer_dma.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/gadget/dwc2_udc_otg_xfer_dma.c b/drivers/usb/gadget/dwc2_udc_otg_xfer_dma.c index a31d875..0594c3d 100644 --- a/drivers/usb/gadget/dwc2_udc_otg_xfer_dma.c +++ b/drivers/usb/gadget/dwc2_udc_otg_xfer_dma.c @@ -235,7 +235,7 @@ static void complete_rx(struct dwc2_udc *dev, u8 ep_num) "%s: RX DMA done : ep = %d, rx bytes = %d/%d, " "is_short = %d, DOEPTSIZ = 0x%x, remained bytes = %d\n", __func__, ep_num, req->req.actual, req->req.length, - is_short, ep_tsr, xfer_size); + is_short, ep_tsr, req->req.length - req->req.actual); if (is_short || req->req.actual == req->req.length) { if (ep_num == EP0_CON && dev->ep0state == DATA_STATE_RECV) { @@ -292,7 +292,7 @@ static void complete_tx(struct dwc2_udc *dev, u8 ep_num) "%s: TX DMA done : ep = %d, tx bytes = %d/%d, " "is_short = %d, DIEPTSIZ = 0x%x, remained bytes = %d\n", __func__, ep_num, req->req.actual, req->req.length, - is_short, ep_tsr, xfer_size); + is_short, ep_tsr, req->req.length - req->req.actual); if (ep_num == 0) { if (dev->ep0state == DATA_STATE_XMIT) { -- 2.5.0