All of lore.kernel.org
 help / color / mirror / Atom feed
From: Nick Dyer <nick.dyer@itdev.co.uk>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-media@vger.kernel.org,
	Benjamin Tissoires <benjamin.tissoires@redhat.com>,
	Benson Leung <bleung@chromium.org>,
	Alan Bowens <Alan.Bowens@atmel.com>,
	Javier Martinez Canillas <javier@osg.samsung.com>,
	Chris Healy <cphealy@gmail.com>,
	Henrik Rydberg <rydberg@bitmath.org>,
	Andrew Duggan <aduggan@synaptics.com>,
	James Chen <james.chen@emc.com.tw>, Dudley Du <dudl@cypress.com>,
	Andrew de los Reyes <adlr@chromium.org>,
	sheckylin@chromium.org, Peter Hutterer <peter.hutterer@who-t.net>,
	Florian Echtler <floe@butterbrot.org>,
	Nick Dyer <nick.dyer@itdev.co.uk>
Subject: [PATCH 1/8] Input: atmel_mxt_ts - add support for T37 diagnostic data
Date: Thu, 21 Apr 2016 10:31:34 +0100	[thread overview]
Message-ID: <1461231101-1237-2-git-send-email-nick.dyer@itdev.co.uk> (raw)
In-Reply-To: <1461231101-1237-1-git-send-email-nick.dyer@itdev.co.uk>

Add function to retrieve raw references data from the diagnostic data
object

Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
---
 drivers/input/touchscreen/atmel_mxt_ts.c | 152 +++++++++++++++++++++++++++++++
 1 file changed, 152 insertions(+)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 2160512..0784a18 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -124,6 +124,17 @@ struct t9_range {
 #define MXT_COMMS_CTRL		0
 #define MXT_COMMS_CMD		1
 
+/* MXT_DEBUG_DIAGNOSTIC_T37 */
+#define MXT_DIAGNOSTIC_PAGEUP 0x01
+#define MXT_DIAGNOSTIC_DELTAS 0x10
+#define MXT_DIAGNOSTIC_SIZE    128
+
+struct t37_debug {
+	u8 mode;
+	u8 page;
+	u8 data[MXT_DIAGNOSTIC_SIZE];
+};
+
 /* Define for MXT_GEN_COMMAND_T6 */
 #define MXT_BOOT_VALUE		0xa5
 #define MXT_RESET_VALUE		0x01
@@ -205,6 +216,14 @@ struct mxt_object {
 	u8 num_report_ids;
 } __packed;
 
+struct mxt_dbg {
+	u16 t37_address;
+	u16 diag_cmd_address;
+	struct t37_debug *t37_buf;
+	unsigned int t37_pages;
+	unsigned int t37_nodes;
+};
+
 /* Each client has this additional data */
 struct mxt_data {
 	struct i2c_client *client;
@@ -233,6 +252,7 @@ struct mxt_data {
 	u8 num_touchids;
 	u8 multitouch;
 	struct t7_config t7_cfg;
+	struct mxt_dbg dbg;
 
 	/* Cached parameters from object table */
 	u16 T5_address;
@@ -2043,6 +2063,136 @@ recheck:
 	return 0;
 }
 
+static u16 mxt_get_debug_value(struct mxt_data *data, unsigned int x,
+			       unsigned int y)
+{
+	struct mxt_dbg *dbg = &data->dbg;
+	unsigned int ofs, page;
+
+	ofs = (y + (x * data->info.matrix_ysize)) * sizeof(u16);
+	page = ofs / MXT_DIAGNOSTIC_SIZE;
+	ofs %= MXT_DIAGNOSTIC_SIZE;
+
+	return get_unaligned_le16(&dbg->t37_buf[page].data[ofs]);
+}
+
+static int mxt_convert_debug_pages(struct mxt_data *data, u16 *outbuf)
+{
+	struct mxt_dbg *dbg = &data->dbg;
+	unsigned int x = 0;
+	unsigned int y = 0;
+	unsigned int i;
+
+	for (i = 0; i < dbg->t37_nodes; i++) {
+		outbuf[i] = mxt_get_debug_value(data, x, y);
+
+		/* Next value */
+		if (++x >= data->info.matrix_xsize) {
+			x = 0;
+			y++;
+		}
+	}
+
+	return 0;
+}
+
+static int mxt_read_diagnostic_debug(struct mxt_data *data, u8 mode,
+				     u16 *outbuf)
+{
+	struct mxt_dbg *dbg = &data->dbg;
+	int retries = 0;
+	int page;
+	int ret;
+	u8 cmd = mode;
+	struct t37_debug *p;
+	u8 cmd_poll;
+
+	for (page = 0; page < dbg->t37_pages; page++) {
+		p = dbg->t37_buf + page;
+
+		ret = mxt_write_reg(data->client, dbg->diag_cmd_address,
+				    cmd);
+		if (ret)
+			return ret;
+
+		retries = 0;
+		msleep(20);
+wait_cmd:
+		/* Read back command byte */
+		ret = __mxt_read_reg(data->client, dbg->diag_cmd_address,
+				     sizeof(cmd_poll), &cmd_poll);
+		if (ret)
+			return ret;
+
+		/* Field is cleared once the command has been processed */
+		if (cmd_poll) {
+			if (retries++ > 100)
+				return -EINVAL;
+
+			msleep(20);
+			goto wait_cmd;
+		}
+
+		/* Read T37 page */
+		ret = __mxt_read_reg(data->client, dbg->t37_address,
+				sizeof(struct t37_debug), p);
+		if (ret)
+			return ret;
+
+		if ((p->mode != mode) || (p->page != page)) {
+			dev_err(&data->client->dev, "T37 page mismatch\n");
+			return -EINVAL;
+		}
+
+		dev_dbg(&data->client->dev, "%s page:%d retries:%d\n",
+			__func__, page, retries);
+
+		/* For remaining pages, write PAGEUP rather than mode */
+		cmd = MXT_DIAGNOSTIC_PAGEUP;
+	}
+
+	return mxt_convert_debug_pages(data, outbuf);
+}
+
+static void mxt_debug_init(struct mxt_data *data)
+{
+	struct mxt_dbg *dbg = &data->dbg;
+	struct mxt_object *object;
+
+	object = mxt_get_object(data, MXT_GEN_COMMAND_T6);
+	if (!object)
+		return;
+
+	dbg->diag_cmd_address = object->start_address + MXT_COMMAND_DIAGNOSTIC;
+
+	object = mxt_get_object(data, MXT_DEBUG_DIAGNOSTIC_T37);
+	if (!object)
+		return;
+
+	if (mxt_obj_size(object) != sizeof(struct t37_debug)) {
+		dev_warn(&data->client->dev, "Bad T37 size");
+		return;
+	}
+
+	dbg->t37_address = object->start_address;
+
+	/* Calculate size of data and allocate buffer */
+	dbg->t37_nodes = data->info.matrix_xsize * data->info.matrix_ysize;
+	dbg->t37_pages = dbg->t37_nodes * sizeof(u16)
+					/ sizeof(dbg->t37_buf->data) + 1;
+
+	dbg->t37_buf = devm_kzalloc(&data->client->dev,
+				     sizeof(struct t37_debug) * dbg->t37_pages,
+				     GFP_KERNEL);
+	if (!dbg->t37_buf)
+		goto error;
+
+	return;
+
+error:
+	dev_err(&data->client->dev, "Error initialising T37 diagnostic data\n");
+}
+
 static int mxt_configure_objects(struct mxt_data *data,
 				 const struct firmware *cfg)
 {
@@ -2070,6 +2220,8 @@ static int mxt_configure_objects(struct mxt_data *data,
 		dev_warn(dev, "No touch object detected\n");
 	}
 
+	mxt_debug_init(data);
+
 	dev_info(dev,
 		 "Family: %u Variant: %u Firmware V%u.%u.%02X Objects: %u\n",
 		 info->family_id, info->variant_id, info->version >> 4,
-- 
2.5.0


  reply	other threads:[~2016-04-21  9:31 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-04-21  9:31 [PATCH 0/8] Input: atmel_mxt_ts - output raw touch diagnostic data via V4L Nick Dyer
2016-04-21  9:31 ` Nick Dyer [this message]
2016-04-21  9:31 ` [PATCH 2/8] Input: atmel_mxt_ts - output diagnostic debug via v4l2 device Nick Dyer
2016-04-21 11:04   ` kbuild test robot
2016-04-21 11:04     ` kbuild test robot
2016-04-21 11:23   ` kbuild test robot
2016-04-21 11:23     ` kbuild test robot
2016-04-21 11:43   ` kbuild test robot
2016-04-21 11:43     ` kbuild test robot
2016-04-21  9:31 ` [PATCH 3/8] Input: atmel_mxt_ts - read touchscreen size Nick Dyer
2016-04-21  9:31 ` [PATCH 4/8] Input: atmel_mxt_ts - handle diagnostic data orientation Nick Dyer
2016-04-21  9:31 ` [PATCH 5/8] Input: atmel_mxt_ts - add diagnostic data support for mXT1386 Nick Dyer
2016-04-21  9:31 ` [PATCH 6/8] Input: atmel_mxt_ts - add support for reference data Nick Dyer
2016-04-21  9:31 ` [PATCH 7/8] Input: atmel_mxt_ts - single node diagnostic data support Nick Dyer
2016-04-21  9:31 ` [PATCH 8/8] Input: atmel_mxt_ts - add v4l pixelformat definition for touch refs output Nick Dyer
2016-04-22  8:26 ` [PATCH 0/8] Input: atmel_mxt_ts - output raw touch diagnostic data via V4L Hans Verkuil
2016-04-22 14:45   ` Mauro Carvalho Chehab
2016-04-22 15:07     ` Nick Dyer
2016-04-22 15:18       ` Hans Verkuil
2016-04-22 15:44         ` Mauro Carvalho Chehab
2016-04-29 12:14           ` Nick Dyer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1461231101-1237-2-git-send-email-nick.dyer@itdev.co.uk \
    --to=nick.dyer@itdev.co.uk \
    --cc=Alan.Bowens@atmel.com \
    --cc=adlr@chromium.org \
    --cc=aduggan@synaptics.com \
    --cc=benjamin.tissoires@redhat.com \
    --cc=bleung@chromium.org \
    --cc=cphealy@gmail.com \
    --cc=dmitry.torokhov@gmail.com \
    --cc=dudl@cypress.com \
    --cc=floe@butterbrot.org \
    --cc=james.chen@emc.com.tw \
    --cc=javier@osg.samsung.com \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=peter.hutterer@who-t.net \
    --cc=rydberg@bitmath.org \
    --cc=sheckylin@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.