From: Imre Deak <imre.deak@intel.com>
To: intel-gfx@lists.freedesktop.org,
"Ville Syrjälä" <ville.syrjala@linux.intel.com>
Subject: Re: ✗ Fi.CI.BAT: failure for drm/i915/bxt: Fix PHY init with partial BIOS config (rev2)
Date: Fri, 22 Apr 2016 16:37:29 +0300 [thread overview]
Message-ID: <1461332249.30129.24.camel@intel.com> (raw)
In-Reply-To: <20160422072713.29360.98469@emeril.freedesktop.org>
On pe, 2016-04-22 at 07:27 +0000, Patchwork wrote:
> == Series Details ==
>
> Series: drm/i915/bxt: Fix PHY init with partial BIOS config (rev2)
> URL : https://patchwork.freedesktop.org/series/6010/
> State : failure
>
Thanks for the review I pushed the patchset to -dinq. Explanation for
the failure below.
> == Summary ==
>
> Series 6010v2 drm/i915/bxt: Fix PHY init with partial BIOS config
> http://patchwork.freedesktop.org/api/1.0/series/6010/revisions/2/mbox
> /
>
> Test kms_flip:
> Subgroup basic-flip-vs-wf_vblank:
> fail -> PASS (ilk-hp8440p) UNSTABLE
> Test kms_force_connector_basic:
> Subgroup prune-stale-modes:
> pass -> SKIP (ilk-hp8440p)
Unrelated platform and I can't find the log for such SKIP results.
> Test kms_pipe_crc_basic:
> Subgroup read-crc-pipe-c:
> pass -> FAIL (bdw-nuci7)
Unrelated platform, I contribute it to the other pipe-crc errors where
the HDMI connector vanishes in the middle of the test run, although
here the failure mode is a bit different with timing out during the CRC
read:
IGT-Version: 1.14-gde4f3ab (x86_64) (Linux: 4.6.0-rc4-CI-Patchwork_1983+ x86_64)
read-crc-pipe-C: Testing connector HDMI-A-2 using pipe C
Timed out: CRC reading
Subtest read-crc-pipe-C: FAIL (5.091s)
Subtest read-crc-pipe-C failed.
**** DEBUG ****
(kms_pipe_crc_basic:6663) DEBUG: Test requirement passed: !(pipe >= data->display.n_pipes)
(kms_pipe_crc_basic:6663) INFO: read-crc-pipe-C: Testing connector HDMI-A-2 using pipe C
(kms_pipe_crc_basic:6663) igt-kms-DEBUG: display: HDMI-A-2: set_pipe(C)
(kms_pipe_crc_basic:6663) igt-kms-DEBUG: display: commit {
(kms_pipe_crc_basic:6663) igt-kms-DEBUG: display: HDMI-A-2: Selecting pipe C
(kms_pipe_crc_basic:6663) igt-kms-DEBUG: display: }
(kms_pipe_crc_basic:6663) DEBUG: Clearing the fb with color (0.00,1.00,0.00)
(kms_pipe_crc_basic:6663) igt-fb-DEBUG: igt_create_fb_with_bo_size(width=1920, height=1080, format=0x34325258, tiling=0x0, size=0)
(kms_pipe_crc_basic:6663) igt-fb-DEBUG: igt_create_fb_with_bo_size(handle=1, pitch=7680)
(kms_pipe_crc_basic:6663) igt-kms-DEBUG: display: C.0: plane_set_fb(67)
(kms_pipe_crc_basic:6663) igt-kms-DEBUG: display: commit {
(kms_pipe_crc_basic:6663) igt-kms-DEBUG: display: HDMI-A-2: Selecting pipe C
(kms_pipe_crc_basic:6663) igt-kms-DEBUG: display: HDMI-A-2: SetCrtc pipe C, fb 67, panning (0, 0), mode 1920x1080
(kms_pipe_crc_basic:6663) igt-kms-DEBUG: display: }
(kms_pipe_crc_basic:6663) igt-core-INFO: Timed out: CRC reading
>
> bdw-
> nuci7 total:193 pass:180 dwarn:0 dfail:0 fail:1 skip:1
> 2
> bdw-
> ultra total:193 pass:170 dwarn:0 dfail:0 fail:0 skip:2
> 3
> bsw-nuc-
> 2 total:192 pass:152 dwarn:0 dfail:0 fail:0 skip:40
> byt-
> nuc total:192 pass:154 dwarn:0 dfail:0 fail:0 skip:3
> 8
> hsw-
> brixbox total:193 pass:169 dwarn:0 dfail:0 fail:0 skip:2
> 4
> hsw-
> gt2 total:193 pass:174 dwarn:0 dfail:0 fail:0 skip:1
> 9
> ilk-
> hp8440p total:193 pass:135 dwarn:0 dfail:0 fail:0 skip:5
> 8
> ivb-
> t430s total:193 pass:165 dwarn:0 dfail:0 fail:0 skip:2
> 8
> skl-i7k-
> 2 total:193 pass:168 dwarn:0 dfail:0 fail:0 skip:25
> skl-
> nuci5 total:193 pass:182 dwarn:0 dfail:0 fail:0 skip:1
> 1
> snb-
> dellxps total:193 pass:155 dwarn:0 dfail:0 fail:0 skip:3
> 8
> snb-
> x220t total:193 pass:155 dwarn:0 dfail:0 fail:1 skip:3
> 7
>
> Results at /archive/results/CI_IGT_test/Patchwork_1983/
>
> d5b5101bd09a7b7e48b1cd78fe8f8a40b21d4deb drm-intel-nightly: 2016y-
> 04m-21d-16h-37m-06s UTC integration manifest
> 76092d6 drm/i915/bxt: Wait for PHY1 GRC done if PHY0 was already
> enabled
> 0ed1b74 drm/i915/bxt: Use PHY0 GRC value for HW state verification
>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2016-04-22 13:38 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-20 17:46 [PATCH 0/3] drm/i915/bxt: Fix PHY init with partial BIOS config Imre Deak
2016-04-20 17:46 ` [PATCH 1/3] drm/i915/bxt: Use PHY0 GRC value for HW state verification Imre Deak
2016-04-20 17:46 ` [PATCH 2/3] drm/i915/bxt: Wait for PHY1 GRC done if PHY0 was already enabled Imre Deak
2016-04-21 12:08 ` Ville Syrjälä
2016-04-21 16:19 ` [PATCH v2 " Imre Deak
2016-04-21 16:43 ` Ville Syrjälä
2016-04-21 16:51 ` Imre Deak
2016-04-20 17:46 ` [PATCH 3/3] drm/i915/bxt: Force reprogramming a PHY with invalid HW state Imre Deak
2016-04-21 12:11 ` Ville Syrjälä
2016-04-21 10:57 ` ✓ Fi.CI.BAT: success for drm/i915/bxt: Fix PHY init with partial BIOS config Patchwork
2016-04-21 12:05 ` ✗ Fi.CI.BAT: failure " Patchwork
2016-04-22 13:15 ` Imre Deak
2016-04-22 7:27 ` ✗ Fi.CI.BAT: failure for drm/i915/bxt: Fix PHY init with partial BIOS config (rev2) Patchwork
2016-04-22 13:37 ` Imre Deak [this message]
2016-04-22 14:07 ` Ville Syrjälä
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1461332249.30129.24.camel@intel.com \
--to=imre.deak@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=ville.syrjala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.