diff for duplicates of <1461765799.2957.4.camel@gmail.com> diff --git a/a/1.txt b/N1/1.txt index 7a30157..51f265c 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -1,29 +1,19 @@ On Wed, 2016-04-27 at 14:50 +0100, Mark Brown wrote: > On Wed, Apr 27, 2016 at 04:53:18AM +0900, Akinobu Mita wrote: ->=20 -> >=20 +> +> > > > For the read data transfer, the address/command byte is sent on the > > rising edge of the first eight SCLK cycles and the read data byte > > is > > transmitted on the falling edge of the next eight SCL cycles. -> That's an innovative and exciting hardware design :/=C2=A0=C2=A0Definitel= -y +> That's an innovative and exciting hardware design :/ Definitely > doesn't > seem to correspond too closely to any SPI mode I can think of. DS1302 uses the standard MicroWire half-duplex transfer timing. The timing can be handled by eg. PXA270 built-in SPI controller with proper configuration. - ---=20 ---=20 -You received this message because you are subscribed to "rtc-linux". -Membership options at http://groups.google.com/group/rtc-linux . -Please read http://groups.google.com/group/rtc-linux/web/checklist -before submitting a driver. ----=20 -You received this message because you are subscribed to the Google Groups "= -rtc-linux" group. -To unsubscribe from this group and stop receiving emails from it, send an e= -mail to rtc-linux+unsubscribe@googlegroups.com. -For more options, visit https://groups.google.com/d/optout. +-- +To unsubscribe from this list: send the line "unsubscribe devicetree" in +the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org +More majordomo info at http://vger.kernel.org/majordomo-info.html diff --git a/a/content_digest b/N1/content_digest index 4707b54..983f12f 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -5,45 +5,36 @@ "ref\020160412012518.GQ3351@sirena.org.uk\0" "ref\0CAC5umyguFq7vBenkJYM8AWCNJ3oGBKzKAMHHMsO=+OFHtE4b0A@mail.gmail.com\0" "ref\020160427135012.GP3217@sirena.org.uk\0" - "From\0Sergei Ianovich <ynvich@gmail.com>\0" - "Subject\0[rtc-linux] Re: [PATCH 0/4] support control with using GPIO lines\0" + "ref\020160427135012.GP3217-GFdadSzt00ze9xe1eoZjHA@public.gmane.org\0" + "From\0Sergei Ianovich <ynvich-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>\0" + "Subject\0Re: [PATCH 0/4] support control with using GPIO lines\0" "Date\0Wed, 27 Apr 2016 17:03:19 +0300\0" - "To\0Mark Brown <broonie@kernel.org>" - " Akinobu Mita <akinobu.mita@gmail.com>\0" - "Cc\0Alexandre Belloni <alexandre.belloni@free-electrons.com>" - rtc-linux@googlegroups.com - open list:OPEN FIRMWARE AND... <devicetree@vger.kernel.org> - " Alessandro Zummo <a.zummo@towertech.it>\0" + "To\0Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>" + " Akinobu Mita <akinobu.mita-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>\0" + "Cc\0Alexandre Belloni <alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>" + rtc-linux-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org + open list:OPEN FIRMWARE AND... <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org> + " Alessandro Zummo <a.zummo-BfzFCNDTiLLj+vYz1yj4TQ@public.gmane.org>\0" "\00:1\0" "b\0" "On Wed, 2016-04-27 at 14:50 +0100, Mark Brown wrote:\n" "> On Wed, Apr 27, 2016 at 04:53:18AM +0900, Akinobu Mita wrote:\n" - ">=20\n" - "> >=20\n" + "> \n" + "> > \n" "> > For the read data transfer, the address/command byte is sent on the\n" "> > rising edge of the first eight SCLK cycles and the read data byte\n" "> > is\n" "> > transmitted on the falling edge of the next eight SCL cycles.\n" - "> That's an innovative and exciting hardware design :/=C2=A0=C2=A0Definitel=\n" - "y\n" + "> That's an innovative and exciting hardware design :/\302\240\302\240Definitely\n" "> doesn't\n" "> seem to correspond too closely to any SPI mode I can think of.\n" "\n" "DS1302 uses the standard MicroWire half-duplex transfer timing. The\n" "timing can be handled by eg. PXA270 built-in SPI controller with proper\n" "configuration.\n" - "\n" - "--=20\n" - "--=20\n" - "You received this message because you are subscribed to \"rtc-linux\".\n" - "Membership options at http://groups.google.com/group/rtc-linux .\n" - "Please read http://groups.google.com/group/rtc-linux/web/checklist\n" - "before submitting a driver.\n" - "---=20\n" - "You received this message because you are subscribed to the Google Groups \"=\n" - "rtc-linux\" group.\n" - "To unsubscribe from this group and stop receiving emails from it, send an e=\n" - "mail to rtc-linux+unsubscribe@googlegroups.com.\n" - For more options, visit https://groups.google.com/d/optout. + "--\n" + "To unsubscribe from this list: send the line \"unsubscribe devicetree\" in\n" + "the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org\n" + More majordomo info at http://vger.kernel.org/majordomo-info.html -096ac40d666b8d7abce89044caeb23f62aedbc85bf7cec7af03e5c1e3bed0e96 +c4d3633e9ae5e6e8d6f37d29c7afabe3e5f090aec4afd551abd8b0408dedfa60
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.