From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail.linuxfoundation.org ([140.211.169.12]:59070 "EHLO mail.linuxfoundation.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932425AbcEBXvc (ORCPT ); Mon, 2 May 2016 19:51:32 -0400 Subject: Patch "ARM: OMAP3: Add cpuidle parameters table for omap3430" has been added to the 4.5-stable tree To: pali.rohar@gmail.com, daniel.lezcano@linaro.org, gregkh@linuxfoundation.org, tony@atomide.com Cc: , From: Date: Mon, 02 May 2016 16:51:31 -0700 Message-ID: <146223309199228@kroah.com> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Sender: stable-owner@vger.kernel.org List-ID: This is a note to let you know that I've just added the patch titled ARM: OMAP3: Add cpuidle parameters table for omap3430 to the 4.5-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary The filename of the patch is: arm-omap3-add-cpuidle-parameters-table-for-omap3430.patch and it can be found in the queue-4.5 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let know about it. >>From 98f42221501353067251fbf11e732707dbb68ce3 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Pali=20Roh=C3=A1r?= Date: Fri, 19 Feb 2016 10:35:39 -0800 Subject: ARM: OMAP3: Add cpuidle parameters table for omap3430 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit From: Pali Rohár commit 98f42221501353067251fbf11e732707dbb68ce3 upstream. Based on CPU type choose generic omap3 or omap3430 specific cpuidle parameters. Parameters for omap3430 were measured on Nokia N900 device and added by commit 5a1b1d3a9efa ("OMAP3: RX-51: Pass cpu idle parameters") which were later removed by commit 231900afba52 ("ARM: OMAP3: cpuidle - remove rx51 cpuidle parameters table") due to huge code complexity. This patch brings cpuidle parameters for omap3430 devices again, but uses simple condition based on CPU type. Fixes: 231900afba52 ("ARM: OMAP3: cpuidle - remove rx51 cpuidle parameters table") Signed-off-by: Pali Rohár Acked-by: Daniel Lezcano Signed-off-by: Tony Lindgren Signed-off-by: Greg Kroah-Hartman --- arch/arm/mach-omap2/cpuidle34xx.c | 69 +++++++++++++++++++++++++++++++++++++- 1 file changed, 68 insertions(+), 1 deletion(-) --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -34,6 +34,7 @@ #include "pm.h" #include "control.h" #include "common.h" +#include "soc.h" /* Mach specific information to be recorded in the C-state driver_data */ struct omap3_idle_statedata { @@ -315,6 +316,69 @@ static struct cpuidle_driver omap3_idle_ .safe_state_index = 0, }; +/* + * Numbers based on measurements made in October 2009 for PM optimized kernel + * with CPU freq enabled on device Nokia N900. Assumes OPP2 (main idle OPP, + * and worst case latencies). + */ +static struct cpuidle_driver omap3430_idle_driver = { + .name = "omap3430_idle", + .owner = THIS_MODULE, + .states = { + { + .enter = omap3_enter_idle_bm, + .exit_latency = 110 + 162, + .target_residency = 5, + .name = "C1", + .desc = "MPU ON + CORE ON", + }, + { + .enter = omap3_enter_idle_bm, + .exit_latency = 106 + 180, + .target_residency = 309, + .name = "C2", + .desc = "MPU ON + CORE ON", + }, + { + .enter = omap3_enter_idle_bm, + .exit_latency = 107 + 410, + .target_residency = 46057, + .name = "C3", + .desc = "MPU RET + CORE ON", + }, + { + .enter = omap3_enter_idle_bm, + .exit_latency = 121 + 3374, + .target_residency = 46057, + .name = "C4", + .desc = "MPU OFF + CORE ON", + }, + { + .enter = omap3_enter_idle_bm, + .exit_latency = 855 + 1146, + .target_residency = 46057, + .name = "C5", + .desc = "MPU RET + CORE RET", + }, + { + .enter = omap3_enter_idle_bm, + .exit_latency = 7580 + 4134, + .target_residency = 484329, + .name = "C6", + .desc = "MPU OFF + CORE RET", + }, + { + .enter = omap3_enter_idle_bm, + .exit_latency = 7505 + 15274, + .target_residency = 484329, + .name = "C7", + .desc = "MPU OFF + CORE OFF", + }, + }, + .state_count = ARRAY_SIZE(omap3_idle_data), + .safe_state_index = 0, +}; + /* Public functions */ /** @@ -333,5 +397,8 @@ int __init omap3_idle_init(void) if (!mpu_pd || !core_pd || !per_pd || !cam_pd) return -ENODEV; - return cpuidle_register(&omap3_idle_driver, NULL); + if (cpu_is_omap3430()) + return cpuidle_register(&omap3430_idle_driver, NULL); + else + return cpuidle_register(&omap3_idle_driver, NULL); } Patches currently in stable-queue which might be from pali.rohar@gmail.com are queue-4.5/arm-omap3-add-cpuidle-parameters-table-for-omap3430.patch