All of lore.kernel.org
 help / color / mirror / Atom feed
From: Brian Norris <computersforpeace@gmail.com>
To: <linux-mtd@lists.infradead.org>
Cc: Heiner Kallweit <hkallweit1@gmail.com>,
	Brian Norris <computersforpeace@gmail.com>,
	Han Xu <han.xu@nxp.com>, Michal Suchanek <hramrach@gmail.com>,
	Boris Brezillon <boris.brezillon@free-electrons.com>,
	Javier Martinez Canillas <javier@osg.samsung.com>,
	Rafal Milecki <zajec5@gmail.com>, Jagan Teki <jteki@openedev.com>,
	"Andrew F. Davis" <afd@ti.com>,
	Mika Westerberg <mika.westerberg@linux.intel.com>,
	Gabor Juhos <juhosg@openwrt.org>, Bean Huo <beanhuo@micron.com>,
	linux-kernel@vger.kernel.org,
	Bayi Cheng <bayi.cheng@mediatek.com>,
	Joachim Eastwood <manabian@gmail.com>,
	Cyrille Pitchen <cyrille.pitchen@atmel.com>
Subject: [PATCH v7 06/10] mtd: spi-nor: check return value from write
Date: Thu,  5 May 2016 17:31:52 -0700	[thread overview]
Message-ID: <1462494716-95312-7-git-send-email-computersforpeace@gmail.com> (raw)
In-Reply-To: <1462494716-95312-1-git-send-email-computersforpeace@gmail.com>

From: Michal Suchanek <hramrach@gmail.com>

SPI NOR hardware drivers now return useful value from their write
functions so check them.

Signed-off-by: Michal Suchanek <hramrach@gmail.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
---
v6 -> v7:
 * no change

 drivers/mtd/spi-nor/spi-nor.c | 45 ++++++++++++++++++++++++++++++-------------
 1 file changed, 32 insertions(+), 13 deletions(-)

diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index f7ffec60a460..dd5c9eb9b9e0 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -1062,10 +1062,14 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
 		nor->program_opcode = SPINOR_OP_BP;
 
 		/* write one byte. */
-		nor->write(nor, to, 1, retlen, buf);
+		ret = nor->write(nor, to, 1, retlen, buf);
+		if (ret < 0)
+			goto sst_write_err;
+		WARN(ret != 1, "While writing 1 byte written %i bytes\n",
+		     (int)ret);
 		ret = spi_nor_wait_till_ready(nor);
 		if (ret)
-			goto time_out;
+			goto sst_write_err;
 	}
 	to += actual;
 
@@ -1074,10 +1078,14 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
 		nor->program_opcode = SPINOR_OP_AAI_WP;
 
 		/* write two bytes. */
-		nor->write(nor, to, 2, retlen, buf + actual);
+		ret = nor->write(nor, to, 2, retlen, buf + actual);
+		if (ret < 0)
+			goto sst_write_err;
+		WARN(ret != 2, "While writing 2 bytes written %i bytes\n",
+		     (int)ret);
 		ret = spi_nor_wait_till_ready(nor);
 		if (ret)
-			goto time_out;
+			goto sst_write_err;
 		to += 2;
 		nor->sst_write_second = true;
 	}
@@ -1086,21 +1094,24 @@ static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
 	write_disable(nor);
 	ret = spi_nor_wait_till_ready(nor);
 	if (ret)
-		goto time_out;
+		goto sst_write_err;
 
 	/* Write out trailing byte if it exists. */
 	if (actual != len) {
 		write_enable(nor);
 
 		nor->program_opcode = SPINOR_OP_BP;
-		nor->write(nor, to, 1, retlen, buf + actual);
-
+		ret = nor->write(nor, to, 1, retlen, buf + actual);
+		if (ret < 0)
+			goto sst_write_err;
+		WARN(ret != 1, "While writing 1 byte written %i bytes\n",
+		     (int)ret);
 		ret = spi_nor_wait_till_ready(nor);
 		if (ret)
-			goto time_out;
+			goto sst_write_err;
 		write_disable(nor);
 	}
-time_out:
+sst_write_err:
 	spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_WRITE);
 	return ret;
 }
@@ -1129,14 +1140,18 @@ static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len,
 
 	/* do all the bytes fit onto one page? */
 	if (page_offset + len <= nor->page_size) {
-		nor->write(nor, to, len, retlen, buf);
+		ret = nor->write(nor, to, len, retlen, buf);
+		if (ret < 0)
+			goto write_err;
 	} else {
 		/* the size of data remaining on the first page */
 		page_size = nor->page_size - page_offset;
-		nor->write(nor, to, page_size, retlen, buf);
+		ret = nor->write(nor, to, page_size, retlen, buf);
+		if (ret < 0)
+			goto write_err;
 
 		/* write everything in nor->page_size chunks */
-		for (i = page_size; i < len; i += page_size) {
+		for (i = ret; i < len; ) {
 			page_size = len - i;
 			if (page_size > nor->page_size)
 				page_size = nor->page_size;
@@ -1147,7 +1162,11 @@ static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len,
 
 			write_enable(nor);
 
-			nor->write(nor, to + i, page_size, retlen, buf + i);
+			ret = nor->write(nor, to + i, page_size, retlen,
+					 buf + i);
+			if (ret < 0)
+				goto write_err;
+			i += ret;
 		}
 	}
 
-- 
2.8.0.rc3.226.g39d4020

  parent reply	other threads:[~2016-05-06  0:33 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-05-06  0:31 [PATCH v7 00/10] Add error checking to spi-nor read and write Brian Norris
2016-05-06  0:31 ` [PATCH v7 01/10] mtd: spi-nor: change return value of read/write Brian Norris
2016-05-06  0:31 ` [PATCH v7 02/10] mtd: m25p80: return amount of data transferred or error in read/write Brian Norris
2016-05-06  0:31 ` [PATCH v7 03/10] mtd: fsl-quadspi: return amount of data read/written or error Brian Norris
2016-05-06  0:31 ` [PATCH v7 04/10] mtd: mtk-quadspi: return amount of data transferred or error in read/write Brian Norris
2016-05-06  0:31 ` [PATCH v7 05/10] mtd: nxp-spifi: " Brian Norris
2016-05-06  0:31 ` Brian Norris [this message]
2016-05-06  0:31 ` [PATCH v7 07/10] mtd: spi-nor: stop passing around retlen Brian Norris
2016-05-06  0:31 ` [PATCH v7 08/10] mtd: spi-nor: simplify write loop Brian Norris
2016-05-06  0:31 ` [PATCH v7 09/10] mtd: spi-nor: add read loop Brian Norris
2016-05-06  0:31 ` [PATCH v7 10/10] mtd: m25p80: read in spi_max_transfer_size chunks Brian Norris
2016-05-16 19:47 ` [PATCH v7 00/10] Add error checking to spi-nor read and write Michal Suchanek
2016-05-18  1:24   ` Brian Norris
2016-05-26 20:12     ` Michal Suchanek
2016-05-23 16:08 ` Cyrille Pitchen
2016-06-02  0:26 ` Brian Norris

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1462494716-95312-7-git-send-email-computersforpeace@gmail.com \
    --to=computersforpeace@gmail.com \
    --cc=afd@ti.com \
    --cc=bayi.cheng@mediatek.com \
    --cc=beanhuo@micron.com \
    --cc=boris.brezillon@free-electrons.com \
    --cc=cyrille.pitchen@atmel.com \
    --cc=han.xu@nxp.com \
    --cc=hkallweit1@gmail.com \
    --cc=hramrach@gmail.com \
    --cc=javier@osg.samsung.com \
    --cc=jteki@openedev.com \
    --cc=juhosg@openwrt.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=manabian@gmail.com \
    --cc=mika.westerberg@linux.intel.com \
    --cc=zajec5@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.