All of lore.kernel.org
 help / color / mirror / Atom feed
From: Eric Blake <eblake@redhat.com>
To: qemu-devel@nongnu.org
Cc: qemu-block@nongnu.org, kwolf@redhat.com,
	Max Reitz <mreitz@redhat.com>, John Snow <jsnow@redhat.com>
Subject: [Qemu-devel] [PATCH v7 02/19] block: Switch blk_read_unthrottled() to byte interface
Date: Fri,  6 May 2016 10:26:28 -0600	[thread overview]
Message-ID: <1462552005-4887-3-git-send-email-eblake@redhat.com> (raw)
In-Reply-To: <1462552005-4887-1-git-send-email-eblake@redhat.com>

Sector-based blk_read() should die; convert the one-off
variant blk_read_unthrottled().

Signed-off-by: Eric Blake <eblake@redhat.com>
---
 include/sysemu/block-backend.h | 4 ++--
 block/block-backend.c          | 8 ++++----
 hw/block/hd-geometry.c         | 2 +-
 3 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/include/sysemu/block-backend.h b/include/sysemu/block-backend.h
index 6991b26..662a106 100644
--- a/include/sysemu/block-backend.h
+++ b/include/sysemu/block-backend.h
@@ -92,8 +92,8 @@ void *blk_get_attached_dev(BlockBackend *blk);
 void blk_set_dev_ops(BlockBackend *blk, const BlockDevOps *ops, void *opaque);
 int blk_read(BlockBackend *blk, int64_t sector_num, uint8_t *buf,
              int nb_sectors);
-int blk_read_unthrottled(BlockBackend *blk, int64_t sector_num, uint8_t *buf,
-                         int nb_sectors);
+int blk_pread_unthrottled(BlockBackend *blk, int64_t offset, uint8_t *buf,
+                          int count);
 int blk_write(BlockBackend *blk, int64_t sector_num, const uint8_t *buf,
               int nb_sectors);
 int blk_write_zeroes(BlockBackend *blk, int64_t sector_num,
diff --git a/block/block-backend.c b/block/block-backend.c
index 96c1d7c..e5a8a07 100644
--- a/block/block-backend.c
+++ b/block/block-backend.c
@@ -790,19 +790,19 @@ int blk_read(BlockBackend *blk, int64_t sector_num, uint8_t *buf,
     return blk_rw(blk, sector_num, buf, nb_sectors, blk_read_entry, 0);
 }

-int blk_read_unthrottled(BlockBackend *blk, int64_t sector_num, uint8_t *buf,
-                         int nb_sectors)
+int blk_pread_unthrottled(BlockBackend *blk, int64_t offset, uint8_t *buf,
+                          int count)
 {
     BlockDriverState *bs = blk_bs(blk);
     int ret;

-    ret = blk_check_request(blk, sector_num, nb_sectors);
+    ret = blk_check_byte_request(blk, offset, count);
     if (ret < 0) {
         return ret;
     }

     bdrv_no_throttling_begin(bs);
-    ret = blk_read(blk, sector_num, buf, nb_sectors);
+    ret = blk_pread(blk, offset, buf, count);
     bdrv_no_throttling_end(bs);
     return ret;
 }
diff --git a/hw/block/hd-geometry.c b/hw/block/hd-geometry.c
index 6d02192..d388f13 100644
--- a/hw/block/hd-geometry.c
+++ b/hw/block/hd-geometry.c
@@ -66,7 +66,7 @@ static int guess_disk_lchs(BlockBackend *blk,
      * but also in async I/O mode. So the I/O throttling function has to
      * be disabled temporarily here, not permanently.
      */
-    if (blk_read_unthrottled(blk, 0, buf, 1) < 0) {
+    if (blk_pread_unthrottled(blk, 0, buf, BDRV_SECTOR_SIZE) < 0) {
         return -1;
     }
     /* test msdos magic */
-- 
2.5.5

  parent reply	other threads:[~2016-05-06 16:27 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-05-06 16:26 [Qemu-devel] [PATCH v7 00/19] block: kill sector-based blk_write/read Eric Blake
2016-05-06 16:26 ` [Qemu-devel] [PATCH v7 01/19] block: Allow BDRV_REQ_FUA through blk_pwrite() Eric Blake
2016-05-06 16:26 ` Eric Blake [this message]
2016-05-06 16:26 ` [Qemu-devel] [PATCH v7 03/19] block: Switch blk_*write_zeroes() to byte interface Eric Blake
2016-05-23 15:42   ` Kevin Wolf
2016-05-23 16:03     ` Eric Blake
2016-05-06 16:26 ` [Qemu-devel] [PATCH v7 04/19] block: Introduce byte-based aio read/write Eric Blake
2016-05-06 16:26 ` [Qemu-devel] [PATCH v7 05/19] ide: Switch to byte-based aio block access Eric Blake
2016-05-06 16:26 ` [Qemu-devel] [PATCH v7 06/19] scsi-disk: " Eric Blake
2016-05-10  8:55   ` Kevin Wolf
2016-05-10 12:56     ` Eric Blake
2016-05-10 14:49       ` Kevin Wolf
2016-05-12 11:25   ` Paolo Bonzini
2016-05-12 11:26     ` Paolo Bonzini
2016-05-12 16:58     ` Eric Blake
2016-05-06 16:26 ` [Qemu-devel] [PATCH v7 07/19] virtio: " Eric Blake
2016-05-06 16:26 ` [Qemu-devel] [PATCH v7 08/19] xen_disk: " Eric Blake
2016-05-06 16:26   ` Eric Blake
2016-05-06 16:26 ` [Qemu-devel] [PATCH v7 09/19] fdc: Switch to byte-based " Eric Blake
2016-05-06 16:26 ` [Qemu-devel] [PATCH v7 10/19] nand: " Eric Blake
2016-05-06 16:26 ` [Qemu-devel] [PATCH v7 11/19] onenand: " Eric Blake
2016-05-06 16:26 ` [Qemu-devel] [PATCH v7 12/19] pflash: " Eric Blake
2016-05-06 16:26 ` [Qemu-devel] [PATCH v7 13/19] sd: " Eric Blake
2016-05-06 16:26 ` [Qemu-devel] [PATCH v7 14/19] m25p80: " Eric Blake
2016-05-06 16:26 ` [Qemu-devel] [PATCH v7 15/19] atapi: " Eric Blake
2016-05-06 16:26 ` [Qemu-devel] [PATCH v7 16/19] nbd: " Eric Blake
2016-05-06 16:26 ` [Qemu-devel] [PATCH v7 17/19] qemu-img: " Eric Blake
2016-05-06 16:26 ` [Qemu-devel] [PATCH v7 18/19] qemu-io: " Eric Blake
2016-05-06 16:26 ` [Qemu-devel] [PATCH v7 19/19] block: Kill unused sector-based blk_* functions Eric Blake
2016-05-10  8:56 ` [Qemu-devel] [PATCH v7 00/19] block: kill sector-based blk_write/read Kevin Wolf
2016-05-10 15:06 ` Kevin Wolf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1462552005-4887-3-git-send-email-eblake@redhat.com \
    --to=eblake@redhat.com \
    --cc=jsnow@redhat.com \
    --cc=kwolf@redhat.com \
    --cc=mreitz@redhat.com \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.