All of lore.kernel.org
 help / color / mirror / Atom feed
From: <gregkh@linuxfoundation.org>
To: a@unstable.cc, gregkh@linuxfoundation.org,
	mareklindner@neomailbox.ch, sven@narfation.org
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "batman-adv: fix DAT candidate selection (must use vid)" has been added to the 4.4-stable tree
Date: Fri, 06 May 2016 14:37:01 -0400	[thread overview]
Message-ID: <146255982111187@kroah.com> (raw)


This is a note to let you know that I've just added the patch titled

    batman-adv: fix DAT candidate selection (must use vid)

to the 4.4-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     batman-adv-fix-dat-candidate-selection-must-use-vid.patch
and it can be found in the queue-4.4 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.


>From 2871734e85e920503d49b3a8bc0afbe0773b6036 Mon Sep 17 00:00:00 2001
From: Antonio Quartulli <a@unstable.cc>
Date: Sat, 12 Mar 2016 11:12:59 +0100
Subject: batman-adv: fix DAT candidate selection (must use vid)

From: Antonio Quartulli <a@unstable.cc>

commit 2871734e85e920503d49b3a8bc0afbe0773b6036 upstream.

Now that DAT is VLAN aware, it must use the VID when
computing the DHT address of the candidate nodes where
an entry is going to be stored/retrieved.

Fixes: be1db4f6615b ("batman-adv: make the Distributed ARP Table vlan aware")
Signed-off-by: Antonio Quartulli <a@unstable.cc>
[sven@narfation.org: fix conflicts with current version]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/batman-adv/distributed-arp-table.c |   17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)

--- a/net/batman-adv/distributed-arp-table.c
+++ b/net/batman-adv/distributed-arp-table.c
@@ -553,6 +553,7 @@ static void batadv_choose_next_candidate
  * be sent to
  * @bat_priv: the bat priv with all the soft interface information
  * @ip_dst: ipv4 to look up in the DHT
+ * @vid: VLAN identifier
  *
  * An originator O is selected if and only if its DHT_ID value is one of three
  * closest values (from the LEFT, with wrap around if needed) then the hash
@@ -561,7 +562,8 @@ static void batadv_choose_next_candidate
  * Returns the candidate array of size BATADV_DAT_CANDIDATE_NUM.
  */
 static struct batadv_dat_candidate *
-batadv_dat_select_candidates(struct batadv_priv *bat_priv, __be32 ip_dst)
+batadv_dat_select_candidates(struct batadv_priv *bat_priv, __be32 ip_dst,
+			     unsigned short vid)
 {
 	int select;
 	batadv_dat_addr_t last_max = BATADV_DAT_ADDR_MAX, ip_key;
@@ -577,7 +579,7 @@ batadv_dat_select_candidates(struct bata
 		return NULL;
 
 	dat.ip = ip_dst;
-	dat.vid = 0;
+	dat.vid = vid;
 	ip_key = (batadv_dat_addr_t)batadv_hash_dat(&dat,
 						    BATADV_DAT_ADDR_MAX);
 
@@ -597,6 +599,7 @@ batadv_dat_select_candidates(struct bata
  * @bat_priv: the bat priv with all the soft interface information
  * @skb: payload to send
  * @ip: the DHT key
+ * @vid: VLAN identifier
  * @packet_subtype: unicast4addr packet subtype to use
  *
  * This function copies the skb with pskb_copy() and is sent as unicast packet
@@ -607,7 +610,7 @@ batadv_dat_select_candidates(struct bata
  */
 static bool batadv_dat_send_data(struct batadv_priv *bat_priv,
 				 struct sk_buff *skb, __be32 ip,
-				 int packet_subtype)
+				 unsigned short vid, int packet_subtype)
 {
 	int i;
 	bool ret = false;
@@ -616,7 +619,7 @@ static bool batadv_dat_send_data(struct
 	struct sk_buff *tmp_skb;
 	struct batadv_dat_candidate *cand;
 
-	cand = batadv_dat_select_candidates(bat_priv, ip);
+	cand = batadv_dat_select_candidates(bat_priv, ip, vid);
 	if (!cand)
 		goto out;
 
@@ -1004,7 +1007,7 @@ bool batadv_dat_snoop_outgoing_arp_reque
 		ret = true;
 	} else {
 		/* Send the request to the DHT */
-		ret = batadv_dat_send_data(bat_priv, skb, ip_dst,
+		ret = batadv_dat_send_data(bat_priv, skb, ip_dst, vid,
 					   BATADV_P_DAT_DHT_GET);
 	}
 out:
@@ -1132,8 +1135,8 @@ void batadv_dat_snoop_outgoing_arp_reply
 	/* Send the ARP reply to the candidates for both the IP addresses that
 	 * the node obtained from the ARP reply
 	 */
-	batadv_dat_send_data(bat_priv, skb, ip_src, BATADV_P_DAT_DHT_PUT);
-	batadv_dat_send_data(bat_priv, skb, ip_dst, BATADV_P_DAT_DHT_PUT);
+	batadv_dat_send_data(bat_priv, skb, ip_src, vid, BATADV_P_DAT_DHT_PUT);
+	batadv_dat_send_data(bat_priv, skb, ip_dst, vid, BATADV_P_DAT_DHT_PUT);
 }
 
 /**


Patches currently in stable-queue which might be from a@unstable.cc are

queue-4.4/batman-adv-reduce-refcnt-of-removed-router-when-updating-route.patch
queue-4.4/batman-adv-check-skb-size-before-using-encapsulated-eth-vlan-header.patch
queue-4.4/batman-adv-fix-broadcast-ogm-queue-limit-on-a-removed-interface.patch
queue-4.4/batman-adv-fix-dat-candidate-selection-must-use-vid.patch

                 reply	other threads:[~2016-05-06 19:33 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=146255982111187@kroah.com \
    --to=gregkh@linuxfoundation.org \
    --cc=a@unstable.cc \
    --cc=mareklindner@neomailbox.ch \
    --cc=stable-commits@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=sven@narfation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.