From mboxrd@z Thu Jan 1 00:00:00 1970 From: David Lechner Subject: [PATCH v5 3/5] ARM: davinci: da8xx: Add USB PHY platform declaration Date: Mon, 9 May 2016 18:46:50 -0500 Message-ID: <1462837612-7803-4-git-send-email-david@lechnology.com> References: <1462837612-7803-1-git-send-email-david@lechnology.com> Return-path: In-Reply-To: <1462837612-7803-1-git-send-email-david-nq/r/kbU++upp/zk7JDF2g@public.gmane.org> Sender: linux-usb-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: nsekhar-l0cyMroinI0@public.gmane.org, khilman-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org Cc: David Lechner , petr-Qh/3xLP0EvwAvxtiuMwx3w@public.gmane.org, sergei.shtylyov-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org, Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Kishon Vijay Abraham I , Greg Kroah-Hartman , Alan Stern , Bin Liu , Lee Jones , devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: devicetree@vger.kernel.org There is now a proper phy driver for the DA8xx SoC USB PHY. This adds the platform device declarations needed to use it. Signed-off-by: David Lechner --- arch/arm/mach-davinci/board-da830-evm.c | 28 +++++----------------------- arch/arm/mach-davinci/board-omapl138-hawk.c | 5 +++++ arch/arm/mach-davinci/include/mach/da8xx.h | 1 + arch/arm/mach-davinci/usb-da8xx.c | 11 +++++++++++ 4 files changed, 22 insertions(+), 23 deletions(-) diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index 3051cb6..c62766e 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -26,7 +26,6 @@ #include #include #include -#include #include #include @@ -106,30 +105,8 @@ static irqreturn_t da830_evm_usb_ocic_irq(int irq, void *dev_id) static __init void da830_evm_usb_init(void) { - u32 cfgchip2; int ret; - /* - * Set up USB clock/mode in the CFGCHIP2 register. - * FYI: CFGCHIP2 is 0x0000ef00 initially. - */ - cfgchip2 = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); - - /* - * We have to override VBUS/ID signals when MUSB is configured into the - * host-only mode -- ID pin will float if no cable is connected, so the - * controller won't be able to drive VBUS thinking that it's a B-device. - * Otherwise, we want to use the OTG mode and enable VBUS comparators. - */ - cfgchip2 &= ~CFGCHIP2_OTGMODE; -#ifdef CONFIG_USB_MUSB_HOST - cfgchip2 |= CFGCHIP2_FORCE_HOST; -#else - cfgchip2 |= CFGCHIP2_SESENDEN | CFGCHIP2_VBDTCTEN; -#endif - - __raw_writel(cfgchip2, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); - /* USB_REFCLKIN is not used. */ ret = da8xx_register_usb20_phy_clk(false); if (ret) @@ -141,6 +118,11 @@ static __init void da830_evm_usb_init(void) pr_warn("%s: USB 1.1 PHY CLK registration failed: %d\n", __func__, ret); + ret = da8xx_register_usb_phy(); + if (ret) + pr_warn("%s: USB PHY registration failed: %d\n", + __func__, ret); + ret = davinci_cfg_reg(DA830_USB0_DRVVBUS); if (ret) pr_warn("%s: USB 2.0 PinMux setup failed: %d\n", __func__, ret); diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c index 8691a25..c5cb8d9 100644 --- a/arch/arm/mach-davinci/board-omapl138-hawk.c +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c @@ -260,6 +260,11 @@ static __init void omapl138_hawk_usb_init(void) pr_warn("%s: USB 1.1 PHY CLK registration failed: %d\n", __func__, ret); + ret = da8xx_register_usb_phy(); + if (ret) + pr_warn("%s: USB PHY registration failed: %d\n", + __func__, ret); + ret = gpio_request_one(DA850_USB1_VBUS_PIN, GPIOF_DIR_OUT, "USB1 VBUS"); if (ret < 0) { diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index c32444b..38d932e 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -92,6 +92,7 @@ int da8xx_register_watchdog(void); int da8xx_register_usb_refclkin(int rate); int da8xx_register_usb20_phy_clk(bool use_usb_refclkin); int da8xx_register_usb11_phy_clk(bool use_usb_refclkin); +int da8xx_register_usb_phy(void); int da8xx_register_usb20(unsigned mA, unsigned potpgt); int da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata); int da8xx_register_emac(void); diff --git a/arch/arm/mach-davinci/usb-da8xx.c b/arch/arm/mach-davinci/usb-da8xx.c index c524d9e..9e41a7f 100644 --- a/arch/arm/mach-davinci/usb-da8xx.c +++ b/arch/arm/mach-davinci/usb-da8xx.c @@ -7,6 +7,7 @@ #include #include #include +#include #include #include @@ -230,6 +231,16 @@ int __init da8xx_register_usb11_phy_clk(bool use_usb_refclkin) return ret; } +static struct platform_device da8xx_usb_phy = { + .name = "da8xx-usb-phy", + .id = 0, +}; + +int __init da8xx_register_usb_phy(void) +{ + return platform_device_register(&da8xx_usb_phy); +} + #if IS_ENABLED(CONFIG_USB_MUSB_HDRC) static struct musb_hdrc_config musb_config = { -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753922AbcEIXsA (ORCPT ); Mon, 9 May 2016 19:48:00 -0400 Received: from vern.gendns.com ([206.190.152.46]:39973 "EHLO vern.gendns.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753602AbcEIXrK (ORCPT ); Mon, 9 May 2016 19:47:10 -0400 From: David Lechner To: nsekhar@ti.com, khilman@kernel.org Cc: David Lechner , petr@barix.com, sergei.shtylyov@cogentembedded.com, Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Kishon Vijay Abraham I , Greg Kroah-Hartman , Alan Stern , Bin Liu , Lee Jones , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org Subject: [PATCH v5 3/5] ARM: davinci: da8xx: Add USB PHY platform declaration Date: Mon, 9 May 2016 18:46:50 -0500 Message-Id: <1462837612-7803-4-git-send-email-david@lechnology.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1462837612-7803-1-git-send-email-david@lechnology.com> References: <1462837612-7803-1-git-send-email-david@lechnology.com> X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - vern.gendns.com X-AntiAbuse: Original Domain - vger.kernel.org X-AntiAbuse: Originator/Caller UID/GID - [47 12] / [47 12] X-AntiAbuse: Sender Address Domain - lechnology.com X-Get-Message-Sender-Via: vern.gendns.com: authenticated_id: davidmain+lechnology.com/only user confirmed/virtual account not confirmed X-Authenticated-Sender: vern.gendns.com: davidmain@lechnology.com X-Source: X-Source-Args: X-Source-Dir: Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org There is now a proper phy driver for the DA8xx SoC USB PHY. This adds the platform device declarations needed to use it. Signed-off-by: David Lechner --- arch/arm/mach-davinci/board-da830-evm.c | 28 +++++----------------------- arch/arm/mach-davinci/board-omapl138-hawk.c | 5 +++++ arch/arm/mach-davinci/include/mach/da8xx.h | 1 + arch/arm/mach-davinci/usb-da8xx.c | 11 +++++++++++ 4 files changed, 22 insertions(+), 23 deletions(-) diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index 3051cb6..c62766e 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -26,7 +26,6 @@ #include #include #include -#include #include #include @@ -106,30 +105,8 @@ static irqreturn_t da830_evm_usb_ocic_irq(int irq, void *dev_id) static __init void da830_evm_usb_init(void) { - u32 cfgchip2; int ret; - /* - * Set up USB clock/mode in the CFGCHIP2 register. - * FYI: CFGCHIP2 is 0x0000ef00 initially. - */ - cfgchip2 = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); - - /* - * We have to override VBUS/ID signals when MUSB is configured into the - * host-only mode -- ID pin will float if no cable is connected, so the - * controller won't be able to drive VBUS thinking that it's a B-device. - * Otherwise, we want to use the OTG mode and enable VBUS comparators. - */ - cfgchip2 &= ~CFGCHIP2_OTGMODE; -#ifdef CONFIG_USB_MUSB_HOST - cfgchip2 |= CFGCHIP2_FORCE_HOST; -#else - cfgchip2 |= CFGCHIP2_SESENDEN | CFGCHIP2_VBDTCTEN; -#endif - - __raw_writel(cfgchip2, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG)); - /* USB_REFCLKIN is not used. */ ret = da8xx_register_usb20_phy_clk(false); if (ret) @@ -141,6 +118,11 @@ static __init void da830_evm_usb_init(void) pr_warn("%s: USB 1.1 PHY CLK registration failed: %d\n", __func__, ret); + ret = da8xx_register_usb_phy(); + if (ret) + pr_warn("%s: USB PHY registration failed: %d\n", + __func__, ret); + ret = davinci_cfg_reg(DA830_USB0_DRVVBUS); if (ret) pr_warn("%s: USB 2.0 PinMux setup failed: %d\n", __func__, ret); diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c index 8691a25..c5cb8d9 100644 --- a/arch/arm/mach-davinci/board-omapl138-hawk.c +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c @@ -260,6 +260,11 @@ static __init void omapl138_hawk_usb_init(void) pr_warn("%s: USB 1.1 PHY CLK registration failed: %d\n", __func__, ret); + ret = da8xx_register_usb_phy(); + if (ret) + pr_warn("%s: USB PHY registration failed: %d\n", + __func__, ret); + ret = gpio_request_one(DA850_USB1_VBUS_PIN, GPIOF_DIR_OUT, "USB1 VBUS"); if (ret < 0) { diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index c32444b..38d932e 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -92,6 +92,7 @@ int da8xx_register_watchdog(void); int da8xx_register_usb_refclkin(int rate); int da8xx_register_usb20_phy_clk(bool use_usb_refclkin); int da8xx_register_usb11_phy_clk(bool use_usb_refclkin); +int da8xx_register_usb_phy(void); int da8xx_register_usb20(unsigned mA, unsigned potpgt); int da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata); int da8xx_register_emac(void); diff --git a/arch/arm/mach-davinci/usb-da8xx.c b/arch/arm/mach-davinci/usb-da8xx.c index c524d9e..9e41a7f 100644 --- a/arch/arm/mach-davinci/usb-da8xx.c +++ b/arch/arm/mach-davinci/usb-da8xx.c @@ -7,6 +7,7 @@ #include #include #include +#include #include #include @@ -230,6 +231,16 @@ int __init da8xx_register_usb11_phy_clk(bool use_usb_refclkin) return ret; } +static struct platform_device da8xx_usb_phy = { + .name = "da8xx-usb-phy", + .id = 0, +}; + +int __init da8xx_register_usb_phy(void) +{ + return platform_device_register(&da8xx_usb_phy); +} + #if IS_ENABLED(CONFIG_USB_MUSB_HDRC) static struct musb_hdrc_config musb_config = { -- 2.7.4