From: Gonzalo Aguilar Delgado <gaguilar.delgado@gmail.com>
To: Sage Weil <sage@newdream.net>
Cc: ceph-devel@vger.kernel.org
Subject: Re: OSD will never become up. HEALTH_ERR
Date: Wed, 11 May 2016 17:47:43 +0200 [thread overview]
Message-ID: <1462981663.4251.1.camel@gmail.com> (raw)
In-Reply-To: <alpine.DEB.2.11.1605110855100.15518@cpach.fuggernut.com>
Hello Sage,
Thank you al lot for answering. Ideed this was the problem. But it was
strange as I told it booted from update without problems until the
ceph-disk command on boot.
I was updating from Ubuntu 14.04 so quite old ceph. Yes.
I posted what I did just in case another one has the same problem.
Thank you a lot.
On mié, 2016-05-11 at 08:55 -0400, Sage Weil wrote:
> On Wed, 11 May 2016, Gonzalo Aguilar Delgado wrote:
> > Hello,
> >
> > I just upgraded my cluster to the version 10.1.2 and it worked well
> for
> > a while until I saw that systemctl ceph-disk@dev-sdc1.service was
> > failed and I reruned it.
>
> What version did you upgrade *from*? If it was older than 0.94.4
> then
> that is the problem. Check for messages in /var/log/ceph/ceph.log.
>
> Also, you probably want to use 10.2.0, not 10.1.2 (which was a
> release
> candidate).
>
> sage
>
>
> > From there the OSD stopped working.
> >
> > This is ubuntu 16.04.
> >
> > I connected to the IRC looking for help where people pointed me to
> one
> > or another place but none of the investigations helped to resolve.
> >
> > My configuration is rather simple:
> >
> > oot@red-compute:~# ceph osd tree
> > ID WEIGHT TYPE NAME UP/DOWN REWEIGHT PRIMARY-
> AFFINITY
> > -1 1.00000 root
> default
> > -4 1.00000 rack rack-
> 1
> > -2 1.00000 host blue-
> compute
> > 0 1.00000 osd.0 down 0
> 1.00000
> > 2 1.00000 osd.2 down 0
> 1.00000
> > -3 1.00000 host red-
> compute
> > 1 1.00000 osd.1 down 0
> 1.00000
> > 3 0.50000 osd.3 up 1.00000
> 1.00000
> > 4 1.00000 osd.4 down 0
> 1.00000
> >
> > It seems that all nodes are in preboot status. I was looking at the
> > latests commits and it seems that there's a patch
> > to make OSDs to wait for cluster to become healthy before
> rejoining.
> > Can this be the source of my problems?
> >
> > root@red-compute:/var/lib/ceph/osd/ceph-1# ceph daemon osd.1 status
> > {
> > "cluster_fsid": "9028f4da-0d77-462b-be9b-dbdf7fa57771",
> > "osd_fsid": "adf9890a-e680-48e4-82c6-e96f4ed56889",
> > "whoami": 1,
> > "state": "preboot",
> > "oldest_map": 1764,
> > "newest_map": 2504,
> > "num_pgs": 323
> > }
> >
> > root@red-compute:/var/lib/ceph/osd/ceph-1# ceph daemon osd.3 status
> > {
> > "cluster_fsid": "9028f4da-0d77-462b-be9b-dbdf7fa57771",
> > "osd_fsid": "8dd085d4-0b50-4c80-a0ca-c5bc4ad972f7",
> > "whoami": 3,
> > "state": "preboot",
> > "oldest_map": 1764,
> > "newest_map": 2504,
> > "num_pgs": 150
> > }
> >
> > 3 is up and in.
> >
> >
> > This is what I got sofar:
> >
> > Once upgraded I discovered that daemon runs under ceph. I just ran
> > chown on ceph directories. and it worked.
> > Firewall is fully disabled. Checked connectivity with nc and nmap.
> > Configuration seems to be right. I can post if you want.
> > Enabling logging on OSD shows that for example osd.1 is
> reconnecting
> > all the time.
> > 2016-05-10 14:35:48.199573 7f53e8f1a700 1 -- 0.0.0.0:6806/13962 >>
> :/0
> > pipe(0x556f99413400 sd=84 :6806 s=0 pgs=0 cs=0 l=0
> > c=0x556f993b3a80).accept sd=84 172.16.0.119:35388/0
> > 2016-05-10 14:35:48.199966 7f53e8f1a700 2
> -- 0.0.0.0:6806/13962 >>
> > :/0 pipe(0x556f99413400 sd=84 :6806 s=4 pgs=0 cs=0 l=0
> > c=0x556f993b3a80).fault (0) Success
> > 2016-05-10 14:35:48.200018 7f53fb941700 1 osd.1 2468
> ms_handle_reset
> > con 0x556f993b3a80 session 0
> > OSD.3 goes ok because never left out because ceph restriction.
> > I rebooted all services at once for it to have available all OSD at
> the
> > same time and don't mark it down. Don't work.
> > I forced up from commandline. ceph osd in 1-5. They appear as in
> for a
> > while then out.
> > We tried ceph-disk activate-all to boot everything. Don't work.
> >
> > The strange thing is that culster started worked just right after
> > upgrade. But the systemctrl command broke both servers.
> > root@blue-compute:~# ceph -w
> > cluster 9028f4da-0d77-462b-be9b-dbdf7fa57771
> > health HEALTH_ERR
> > 694 pgs are stuck inactive for more than 300 seconds
> > 694 pgs stale
> > 694 pgs stuck stale
> > too many PGs per OSD (1528 > max 300)
> > mds cluster is degraded
> > crush map has straw_calc_version=0
> > monmap e10: 2 mons at {blue-compute=172.16.0.119:6789/0,red-
> > compute=172.16.0.100:6789/0}
> > election epoch 3600, quorum 0,1 red-compute,blue-
> compute
> > fsmap e673: 1/1/1 up {0:0=blue-compute=up:replay}
> > osdmap e2495: 5 osds: 1 up, 1 in; 5 remapped pgs
> > pgmap v40765481: 764 pgs, 6 pools, 410 GB data, 103 kobjects
> > 87641 MB used, 212 GB / 297 GB avail
> > 694 stale+active+clean
> > 70 active+clean
> >
> > 2016-05-10 17:03:55.822440 mon.0 [INF] HEALTH_ERR; 694 pgs are
> stuck
> > inactive for more than 300 seconds; 694 pgs stale; 694 pgs stuck
> stale;
> > too many PGs per OSD (1528 > max 300); mds cluster is degraded;
> crush
> > map has straw_calc_version=
> > cat /etc/ceph/ceph.conf
> > [global]
> >
> > fsid = 9028f4da-0d77-462b-be9b-dbdf7fa57771
> > mon_initial_members = blue-compute, red-compute
> > mon_host = 172.16.0.119, 172.16.0.100
> > auth_cluster_required = cephx
> > auth_service_required = cephx
> > auth_client_required = cephx
> > filestore_xattr_use_omap = true
> > public_network = 172.16.0.0/24
> > osd_pool_default_pg_num = 100
> > osd_pool_default_pgp_num = 100
> > osd_pool_default_size = 2 # Write an object 3 times.
> > osd_pool_default_min_size = 1 # Allow writing one copy in a
> degraded
> > state.
> >
> > ## Required upgrade
> > osd max object name len = 256
> > osd max object namespace len = 64
> >
> > [mon.]
> >
> > debug mon = 9
> > caps mon = "allow *"
> >
> > Any help on this? Any clue of what's going wrong?
> >
> >
> > I also see this, I don't know if it's related or not
> >
> > => ceph-osd.admin.log <==
> > 2016-05-10 18:21:46.060278 7fa8f30cc8c0 0 ceph version 10.1.2
> > (4a2a6f72640d6b74a3bbd92798bb913ed380dcd4), process ceph-osd, pid
> 14135
> > 2016-05-10 18:21:46.060460 7fa8f30cc8c0 -1 bluestore(/dev/sdc2)
> > _read_bdev_label unable to decode label at offset 66:
> > buffer::malformed_input: void
> > bluestore_bdev_label_t::decode(ceph::buffer::list::iterator&)
> decode
> > past end of struct encoding
> > 2016-05-10 18:21:46.062949 7fa8f30cc8c0 1 journal _open /dev/sdc2
> fd
> > 4: 5367660544 bytes, block size 4096 bytes, directio = 0, aio = 0
> > 2016-05-10 18:21:46.062991 7fa8f30cc8c0 1 journal close /dev/sdc2
> > 2016-05-10 18:21:46.063026 7fa8f30cc8c0 0 probe_block_device_fsid
> > /dev/sdc2 is filestore, 119a9f4e-73d8-4a1f-877c-d60b01840c96
> > 2016-05-10 18:21:47.072082 7eff735598c0 0 ceph version 10.1.2
> > (4a2a6f72640d6b74a3bbd92798bb913ed380dcd4), process ceph-osd, pid
> 14177
> > 2016-05-10 18:21:47.072285 7eff735598c0 -1 bluestore(/dev/sdf2)
> > _read_bdev_label unable to decode label at offset 66:
> > buffer::malformed_input: void
> > bluestore_bdev_label_t::decode(ceph::buffer::list::iterator&)
> decode
> > past end of struct encoding
> > 2016-05-10 18:21:47.074799 7eff735598c0 1 journal _open /dev/sdf2
> fd
> > 4: 5367660544 bytes, block size 4096 bytes, directio = 0, aio = 0
> > 2016-05-10 18:21:47.074844 7eff735598c0 1 journal close /dev/sdf2
> > 2016-05-10 18:21:47.074881 7eff735598c0 0 probe_block_device_fsid
> > /dev/sdf2 is filestore, fd069e6a-9a62-4286-99cb-d8a523bd946a
> >
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe ceph-
> devel" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> >
> >
--
To unsubscribe from this list: send the line "unsubscribe ceph-devel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-05-11 15:47 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-11 8:37 OSD will never become up. HEALTH_ERR Gonzalo Aguilar Delgado
2016-05-11 12:55 ` Sage Weil
2016-05-11 15:47 ` Gonzalo Aguilar Delgado [this message]
[not found] <1462955200.13078.20.camel@gmail.com>
[not found] ` <1462972579.13078.36.camel@gmail.com>
2016-05-11 15:20 ` Gonzalo Aguilar Delgado
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1462981663.4251.1.camel@gmail.com \
--to=gaguilar.delgado@gmail.com \
--cc=ceph-devel@vger.kernel.org \
--cc=sage@newdream.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.