From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 10/69] block: Support AIO drivers in bdrv_driver_preadv/pwritev()
Date: Thu, 12 May 2016 16:34:50 +0200 [thread overview]
Message-ID: <1463063749-2201-11-git-send-email-kwolf@redhat.com> (raw)
In-Reply-To: <1463063749-2201-1-git-send-email-kwolf@redhat.com>
Instead of registering emulation functions as .bdrv_co_writev, just
directly check whether the function is there or not, and use the AIO
interface if it isn't. This makes the read/write functions more
consistent with how things are done in other places (flush, discard,
etc.)
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
---
block/io.c | 126 ++++++++++++++++++++++++-----------------------------------
trace-events | 1 -
2 files changed, 52 insertions(+), 75 deletions(-)
diff --git a/block/io.c b/block/io.c
index 53b4f2c..fbde5e0 100644
--- a/block/io.c
+++ b/block/io.c
@@ -40,12 +40,6 @@ static BlockAIOCB *bdrv_aio_readv_em(BlockDriverState *bs,
static BlockAIOCB *bdrv_aio_writev_em(BlockDriverState *bs,
int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
BlockCompletionFunc *cb, void *opaque);
-static int coroutine_fn bdrv_co_readv_em(BlockDriverState *bs,
- int64_t sector_num, int nb_sectors,
- QEMUIOVector *iov);
-static int coroutine_fn bdrv_co_writev_em(BlockDriverState *bs,
- int64_t sector_num, int nb_sectors,
- QEMUIOVector *iov);
static BlockAIOCB *bdrv_co_aio_rw_vector(BlockDriverState *bs,
int64_t sector_num,
QEMUIOVector *qiov,
@@ -112,19 +106,13 @@ void bdrv_io_limits_update_group(BlockDriverState *bs, const char *group)
void bdrv_setup_io_funcs(BlockDriver *bdrv)
{
- /* Block drivers without coroutine functions need emulation */
- if (!bdrv->bdrv_co_readv) {
- bdrv->bdrv_co_readv = bdrv_co_readv_em;
- bdrv->bdrv_co_writev = bdrv_co_writev_em;
-
- /* bdrv_co_readv_em()/brdv_co_writev_em() work in terms of aio, so if
- * the block driver lacks aio we need to emulate that too.
- */
- if (!bdrv->bdrv_aio_readv) {
- /* add AIO emulation layer */
- bdrv->bdrv_aio_readv = bdrv_aio_readv_em;
- bdrv->bdrv_aio_writev = bdrv_aio_writev_em;
- }
+ /* bdrv_co_readv_em()/brdv_co_writev_em() work in terms of aio, so if
+ * the block driver lacks aio we need to emulate that.
+ */
+ if (!bdrv->bdrv_aio_readv) {
+ /* add AIO emulation layer */
+ bdrv->bdrv_aio_readv = bdrv_aio_readv_em;
+ bdrv->bdrv_aio_writev = bdrv_aio_writev_em;
}
}
@@ -797,6 +785,19 @@ int bdrv_pwrite_sync(BlockDriverState *bs, int64_t offset,
return 0;
}
+typedef struct CoroutineIOCompletion {
+ Coroutine *coroutine;
+ int ret;
+} CoroutineIOCompletion;
+
+static void bdrv_co_io_em_complete(void *opaque, int ret)
+{
+ CoroutineIOCompletion *co = opaque;
+
+ co->ret = ret;
+ qemu_coroutine_enter(co->coroutine, NULL);
+}
+
static int coroutine_fn bdrv_driver_preadv(BlockDriverState *bs,
uint64_t offset, uint64_t bytes,
QEMUIOVector *qiov, int flags)
@@ -809,7 +810,23 @@ static int coroutine_fn bdrv_driver_preadv(BlockDriverState *bs,
assert((bytes & (BDRV_SECTOR_SIZE - 1)) == 0);
assert((bytes >> BDRV_SECTOR_BITS) <= BDRV_REQUEST_MAX_SECTORS);
- return drv->bdrv_co_readv(bs, sector_num, nb_sectors, qiov);
+ if (drv->bdrv_co_readv) {
+ return drv->bdrv_co_readv(bs, sector_num, nb_sectors, qiov);
+ } else {
+ BlockAIOCB *acb;
+ CoroutineIOCompletion co = {
+ .coroutine = qemu_coroutine_self(),
+ };
+
+ acb = bs->drv->bdrv_aio_readv(bs, sector_num, qiov, nb_sectors,
+ bdrv_co_io_em_complete, &co);
+ if (acb == NULL) {
+ return -EIO;
+ } else {
+ qemu_coroutine_yield();
+ return co.ret;
+ }
+ }
}
static int coroutine_fn bdrv_driver_pwritev(BlockDriverState *bs,
@@ -828,9 +845,23 @@ static int coroutine_fn bdrv_driver_pwritev(BlockDriverState *bs,
if (drv->bdrv_co_writev_flags) {
ret = drv->bdrv_co_writev_flags(bs, sector_num, nb_sectors, qiov,
flags);
- } else {
+ } else if (drv->bdrv_co_writev) {
assert(drv->supported_write_flags == 0);
ret = drv->bdrv_co_writev(bs, sector_num, nb_sectors, qiov);
+ } else {
+ BlockAIOCB *acb;
+ CoroutineIOCompletion co = {
+ .coroutine = qemu_coroutine_self(),
+ };
+
+ acb = bs->drv->bdrv_aio_writev(bs, sector_num, qiov, nb_sectors,
+ bdrv_co_io_em_complete, &co);
+ if (acb == NULL) {
+ return -EIO;
+ } else {
+ qemu_coroutine_yield();
+ return co.ret;
+ }
}
if (ret == 0 && (flags & BDRV_REQ_FUA) &&
@@ -2348,59 +2379,6 @@ void qemu_aio_unref(void *p)
/**************************************************************/
/* Coroutine block device emulation */
-typedef struct CoroutineIOCompletion {
- Coroutine *coroutine;
- int ret;
-} CoroutineIOCompletion;
-
-static void bdrv_co_io_em_complete(void *opaque, int ret)
-{
- CoroutineIOCompletion *co = opaque;
-
- co->ret = ret;
- qemu_coroutine_enter(co->coroutine, NULL);
-}
-
-static int coroutine_fn bdrv_co_io_em(BlockDriverState *bs, int64_t sector_num,
- int nb_sectors, QEMUIOVector *iov,
- bool is_write)
-{
- CoroutineIOCompletion co = {
- .coroutine = qemu_coroutine_self(),
- };
- BlockAIOCB *acb;
-
- if (is_write) {
- acb = bs->drv->bdrv_aio_writev(bs, sector_num, iov, nb_sectors,
- bdrv_co_io_em_complete, &co);
- } else {
- acb = bs->drv->bdrv_aio_readv(bs, sector_num, iov, nb_sectors,
- bdrv_co_io_em_complete, &co);
- }
-
- trace_bdrv_co_io_em(bs, sector_num, nb_sectors, is_write, acb);
- if (!acb) {
- return -EIO;
- }
- qemu_coroutine_yield();
-
- return co.ret;
-}
-
-static int coroutine_fn bdrv_co_readv_em(BlockDriverState *bs,
- int64_t sector_num, int nb_sectors,
- QEMUIOVector *iov)
-{
- return bdrv_co_io_em(bs, sector_num, nb_sectors, iov, false);
-}
-
-static int coroutine_fn bdrv_co_writev_em(BlockDriverState *bs,
- int64_t sector_num, int nb_sectors,
- QEMUIOVector *iov)
-{
- return bdrv_co_io_em(bs, sector_num, nb_sectors, iov, true);
-}
-
static void coroutine_fn bdrv_flush_co_entry(void *opaque)
{
RwCo *rwco = opaque;
diff --git a/trace-events b/trace-events
index 8350743..b4acd2a 100644
--- a/trace-events
+++ b/trace-events
@@ -74,7 +74,6 @@ bdrv_co_copy_on_readv(void *bs, int64_t sector_num, int nb_sector) "bs %p sector
bdrv_co_readv_no_serialising(void *bs, int64_t sector_num, int nb_sector) "bs %p sector_num %"PRId64" nb_sectors %d"
bdrv_co_writev(void *bs, int64_t sector_num, int nb_sector) "bs %p sector_num %"PRId64" nb_sectors %d"
bdrv_co_write_zeroes(void *bs, int64_t sector_num, int nb_sector, int flags) "bs %p sector_num %"PRId64" nb_sectors %d flags %#x"
-bdrv_co_io_em(void *bs, int64_t sector_num, int nb_sectors, int is_write, void *acb) "bs %p sector_num %"PRId64" nb_sectors %d is_write %d acb %p"
bdrv_co_do_copy_on_readv(void *bs, int64_t sector_num, int nb_sectors, int64_t cluster_sector_num, int cluster_nb_sectors) "bs %p sector_num %"PRId64" nb_sectors %d cluster_sector_num %"PRId64" cluster_nb_sectors %d"
# block/stream.c
--
1.8.3.1
next prev parent reply other threads:[~2016-05-12 14:36 UTC|newest]
Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-12 14:34 [Qemu-devel] [PULL 00/69] Block layer patches Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 01/69] block: Don't disable I/O throttling on sync requests Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 02/69] block: make bdrv_start_throttled_reqs return void Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 03/69] block: move restarting of throttled reqs to block/throttle-groups.c Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 04/69] block: extract bdrv_drain_poll/bdrv_co_yield_to_drain from bdrv_drain/bdrv_co_drain Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 05/69] block: introduce bdrv_no_throttling_begin/end Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 06/69] block: plug whole tree at once, introduce bdrv_io_unplugged_begin/end Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 07/69] linux-aio: make it more type safe Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 08/69] block: Introduce bdrv_driver_preadv() Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 09/69] block: Introduce bdrv_driver_pwritev() Kevin Wolf
2016-05-12 14:34 ` Kevin Wolf [this message]
2016-05-12 14:34 ` [Qemu-devel] [PULL 11/69] block: Rename bdrv_co_do_preadv/writev to bdrv_co_preadv/writev Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 12/69] block: Introduce .bdrv_co_preadv/pwritev BlockDriver function Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 13/69] bochs: Implement .bdrv_co_preadv() interface Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 14/69] cloop: " Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 15/69] dmg: " Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 16/69] vdi: " Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 17/69] vdi: Implement .bdrv_co_pwritev() interface Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 18/69] vmdk: Add vmdk_find_offset_in_cluster() Kevin Wolf
2016-05-12 14:34 ` [Qemu-devel] [PULL 19/69] vmdk: Implement .bdrv_co_preadv() interface Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 20/69] vmdk: Implement .bdrv_co_pwritev() interface Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 21/69] vpc: Implement .bdrv_co_preadv() interface Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 22/69] vpc: Implement .bdrv_co_pwritev() interface Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 23/69] vvfat: Implement .bdrv_co_preadv/pwritev interfaces Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 24/69] block: Remove BlockDriver.bdrv_read/write Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 25/69] block: Fix typo in comment Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 26/69] block: always compile-check debug prints Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 27/69] Allow users to specify the vmdk virtual hardware version Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 28/69] qemu-io: Fix memory leak in 'aio_write -z' Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 29/69] block: Allow BDRV_REQ_FUA through blk_pwrite() Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 30/69] block: Switch blk_read_unthrottled() to byte interface Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 31/69] block: Switch blk_*write_zeroes() " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 32/69] block: Introduce byte-based aio read/write Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 33/69] ide: Switch to byte-based aio block access Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 34/69] scsi-disk: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 35/69] virtio: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 36/69] xen_disk: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 37/69] fdc: Switch to byte-based " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 38/69] nand: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 39/69] onenand: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 40/69] pflash: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 41/69] sd: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 42/69] m25p80: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 43/69] atapi: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 44/69] nbd: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 45/69] qemu-img: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 46/69] qemu-io: " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 47/69] block: Kill unused sector-based blk_* functions Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 48/69] qcow2: improve qcow2_co_write_zeroes() Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 49/69] block: Make supported_write_flags a per-bds property Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 50/69] block: Honor BDRV_REQ_FUA during write_zeroes Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 51/69] nbd: Simplify client FUA handling Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 52/69] block: Invalidate all children Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 53/69] block: Drop superfluous invalidating bs->file from drivers Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 54/69] block: Inactivate all children Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 55/69] iotests: fix the redirection order in 083 Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 56/69] qemu-img: check block status of backing file when converting Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 57/69] Add new block driver interface to add/delete a BDS's child Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 58/69] quorum: implement bdrv_add_child() and bdrv_del_child() Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 59/69] qmp: add monitor command to add/remove a child Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 60/69] qemu-io: Add missing option documentation Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 61/69] qemu-io: Make 'open' subcommand more like command line Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 62/69] qemu-io: Use bool for command line flags Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 63/69] qemu-io: Allow unaligned access by default Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 64/69] qemu-io: Add 'write -f' to test FUA flag Kevin Wolf
2016-05-12 21:23 ` Eric Blake
2016-05-12 14:35 ` [Qemu-devel] [PULL 65/69] qemu-io: Add 'write -z -u' to test MAY_UNMAP flag Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 66/69] block: add support for --image-opts in block I/O tests Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 67/69] block: add support for encryption secrets " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 68/69] block: enable testing of LUKS driver with " Kevin Wolf
2016-05-12 14:35 ` [Qemu-devel] [PULL 69/69] qemu-iotests: iotests: fail hard if not run via "check" Kevin Wolf
2016-05-12 16:19 ` [Qemu-devel] [PULL 00/69] Block layer patches Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1463063749-2201-11-git-send-email-kwolf@redhat.com \
--to=kwolf@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.