From: <gregkh@linuxfoundation.org>
To: daniel@iogearbox.net, ast@kernel.org, davem@davemloft.net,
gregkh@linuxfoundation.org, tom@herbertland.com
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "net: use skb_postpush_rcsum instead of own implementations" has been added to the 4.4-stable tree
Date: Mon, 16 May 2016 11:26:05 -0700 [thread overview]
Message-ID: <146342316514072@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
net: use skb_postpush_rcsum instead of own implementations
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
net-use-skb_postpush_rcsum-instead-of-own-implementations.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From foo@baz Mon May 16 11:21:32 PDT 2016
From: Daniel Borkmann <daniel@iogearbox.net>
Date: Sat, 20 Feb 2016 00:29:30 +0100
Subject: net: use skb_postpush_rcsum instead of own implementations
From: Daniel Borkmann <daniel@iogearbox.net>
[ Upstream commit 6b83d28a55a891a9d70fc61ccb1c138e47dcbe74 ]
Replace individual implementations with the recently introduced
skb_postpush_rcsum() helper.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Tom Herbert <tom@herbertland.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
net/core/skbuff.c | 4 +---
net/ipv6/reassembly.c | 6 ++----
net/openvswitch/actions.c | 8 +++-----
net/openvswitch/vport-netdev.c | 2 +-
net/openvswitch/vport.h | 7 -------
5 files changed, 7 insertions(+), 20 deletions(-)
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -4433,9 +4433,7 @@ int skb_vlan_push(struct sk_buff *skb, _
skb->mac_len += VLAN_HLEN;
__skb_pull(skb, offset);
- if (skb->ip_summed == CHECKSUM_COMPLETE)
- skb->csum = csum_add(skb->csum, csum_partial(skb->data
- + (2 * ETH_ALEN), VLAN_HLEN, 0));
+ skb_postpush_rcsum(skb, skb->data + (2 * ETH_ALEN), VLAN_HLEN);
}
__vlan_hwaccel_put_tag(skb, vlan_proto, vlan_tci);
return 0;
--- a/net/ipv6/reassembly.c
+++ b/net/ipv6/reassembly.c
@@ -496,10 +496,8 @@ static int ip6_frag_reasm(struct frag_qu
IP6CB(head)->flags |= IP6SKB_FRAGMENTED;
/* Yes, and fold redundant checksum back. 8) */
- if (head->ip_summed == CHECKSUM_COMPLETE)
- head->csum = csum_partial(skb_network_header(head),
- skb_network_header_len(head),
- head->csum);
+ skb_postpush_rcsum(head, skb_network_header(head),
+ skb_network_header_len(head));
rcu_read_lock();
IP6_INC_STATS_BH(net, __in6_dev_get(dev), IPSTATS_MIB_REASMOKS);
--- a/net/openvswitch/actions.c
+++ b/net/openvswitch/actions.c
@@ -158,9 +158,7 @@ static int push_mpls(struct sk_buff *skb
new_mpls_lse = (__be32 *)skb_mpls_header(skb);
*new_mpls_lse = mpls->mpls_lse;
- if (skb->ip_summed == CHECKSUM_COMPLETE)
- skb->csum = csum_add(skb->csum, csum_partial(new_mpls_lse,
- MPLS_HLEN, 0));
+ skb_postpush_rcsum(skb, new_mpls_lse, MPLS_HLEN);
hdr = eth_hdr(skb);
hdr->h_proto = mpls->mpls_ethertype;
@@ -280,7 +278,7 @@ static int set_eth_addr(struct sk_buff *
ether_addr_copy_masked(eth_hdr(skb)->h_dest, key->eth_dst,
mask->eth_dst);
- ovs_skb_postpush_rcsum(skb, eth_hdr(skb), ETH_ALEN * 2);
+ skb_postpush_rcsum(skb, eth_hdr(skb), ETH_ALEN * 2);
ether_addr_copy(flow_key->eth.src, eth_hdr(skb)->h_source);
ether_addr_copy(flow_key->eth.dst, eth_hdr(skb)->h_dest);
@@ -639,7 +637,7 @@ static int ovs_vport_output(struct net *
/* Reconstruct the MAC header. */
skb_push(skb, data->l2_len);
memcpy(skb->data, &data->l2_data, data->l2_len);
- ovs_skb_postpush_rcsum(skb, skb->data, data->l2_len);
+ skb_postpush_rcsum(skb, skb->data, data->l2_len);
skb_reset_mac_header(skb);
ovs_vport_send(vport, skb);
--- a/net/openvswitch/vport-netdev.c
+++ b/net/openvswitch/vport-netdev.c
@@ -58,7 +58,7 @@ static void netdev_port_receive(struct s
return;
skb_push(skb, ETH_HLEN);
- ovs_skb_postpush_rcsum(skb, skb->data, ETH_HLEN);
+ skb_postpush_rcsum(skb, skb->data, ETH_HLEN);
ovs_vport_receive(vport, skb, skb_tunnel_info(skb));
return;
error:
--- a/net/openvswitch/vport.h
+++ b/net/openvswitch/vport.h
@@ -184,13 +184,6 @@ static inline struct vport *vport_from_p
int ovs_vport_receive(struct vport *, struct sk_buff *,
const struct ip_tunnel_info *);
-static inline void ovs_skb_postpush_rcsum(struct sk_buff *skb,
- const void *start, unsigned int len)
-{
- if (skb->ip_summed == CHECKSUM_COMPLETE)
- skb->csum = csum_add(skb->csum, csum_partial(start, len, 0));
-}
-
static inline const char *ovs_vport_name(struct vport *vport)
{
return vport->dev->name;
Patches currently in stable-queue which might be from daniel@iogearbox.net are
queue-4.4/bpf-fix-double-fdput-in-replace_map_fd_with_map_ptr.patch
queue-4.4/vlan-pull-on-__vlan_insert_tag-error-path-and-fix-csum-correction.patch
queue-4.4/bpf-fix-refcnt-overflow.patch
queue-4.4/bpf-verifier-reject-invalid-ld_abs-bpf_dw-instruction.patch
queue-4.4/net-use-skb_postpush_rcsum-instead-of-own-implementations.patch
queue-4.4/bpf-fix-check_map_func_compatibility-logic.patch
reply other threads:[~2016-05-16 18:33 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=146342316514072@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=ast@kernel.org \
--cc=daniel@iogearbox.net \
--cc=davem@davemloft.net \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=tom@herbertland.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.