From: Peng Fan <van.freenix@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH V2 05/15] imx-common: use simpler runtime cpu dection macros
Date: Mon, 23 May 2016 18:35:56 +0800 [thread overview]
Message-ID: <1463999766-16786-5-git-send-email-van.freenix@gmail.com> (raw)
In-Reply-To: <1463999766-16786-1-git-send-email-van.freenix@gmail.com>
Use simpler runtime cpu dection macros.
Signed-off-by: Peng Fan <van.freenix@gmail.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
Cc: "Beno?t Th?baudeau" <benoit.thebaudeau.dev@gmail.com>
---
arch/arm/imx-common/hab.c | 48 ++++++++++++------------------------------
arch/arm/imx-common/init.c | 5 ++---
arch/arm/imx-common/iomux-v3.c | 2 +-
arch/arm/imx-common/sata.c | 2 +-
arch/arm/imx-common/timer.c | 11 +++-------
5 files changed, 20 insertions(+), 48 deletions(-)
diff --git a/arch/arm/imx-common/hab.c b/arch/arm/imx-common/hab.c
index 1e4ed7e..a980688 100644
--- a/arch/arm/imx-common/hab.c
+++ b/arch/arm/imx-common/hab.c
@@ -17,65 +17,45 @@
#define hab_rvt_report_event_p \
( \
- ((is_cpu_type(MXC_CPU_MX6Q) || \
- is_cpu_type(MXC_CPU_MX6D)) && \
- (soc_rev() >= CHIP_REV_1_5)) ? \
+ (is_mx6dq() && (soc_rev() >= CHIP_REV_1_5)) ? \
((hab_rvt_report_event_t *)HAB_RVT_REPORT_EVENT_NEW) : \
- ((is_cpu_type(MXC_CPU_MX6DL) || \
- is_cpu_type(MXC_CPU_MX6SOLO)) && \
- (soc_rev() >= CHIP_REV_1_2)) ? \
+ (is_mx6sdl() && (soc_rev() >= CHIP_REV_1_2)) ? \
((hab_rvt_report_event_t *)HAB_RVT_REPORT_EVENT_NEW) : \
((hab_rvt_report_event_t *)HAB_RVT_REPORT_EVENT) \
)
#define hab_rvt_report_status_p \
( \
- ((is_cpu_type(MXC_CPU_MX6Q) || \
- is_cpu_type(MXC_CPU_MX6D)) && \
- (soc_rev() >= CHIP_REV_1_5)) ? \
+ (is_mx6dq() && (soc_rev() >= CHIP_REV_1_5)) ? \
((hab_rvt_report_status_t *)HAB_RVT_REPORT_STATUS_NEW) :\
- ((is_cpu_type(MXC_CPU_MX6DL) || \
- is_cpu_type(MXC_CPU_MX6SOLO)) && \
- (soc_rev() >= CHIP_REV_1_2)) ? \
+ (is_mx6sdl() && (soc_rev() >= CHIP_REV_1_2)) ? \
((hab_rvt_report_status_t *)HAB_RVT_REPORT_STATUS_NEW) :\
((hab_rvt_report_status_t *)HAB_RVT_REPORT_STATUS) \
)
#define hab_rvt_authenticate_image_p \
( \
- ((is_cpu_type(MXC_CPU_MX6Q) || \
- is_cpu_type(MXC_CPU_MX6D)) && \
- (soc_rev() >= CHIP_REV_1_5)) ? \
+ (is_mx6dq() && (soc_rev() >= CHIP_REV_1_5)) ? \
((hab_rvt_authenticate_image_t *)HAB_RVT_AUTHENTICATE_IMAGE_NEW) : \
- ((is_cpu_type(MXC_CPU_MX6DL) || \
- is_cpu_type(MXC_CPU_MX6SOLO)) && \
- (soc_rev() >= CHIP_REV_1_2)) ? \
+ (is_mx6sdl() && (soc_rev() >= CHIP_REV_1_2)) ? \
((hab_rvt_authenticate_image_t *)HAB_RVT_AUTHENTICATE_IMAGE_NEW) : \
((hab_rvt_authenticate_image_t *)HAB_RVT_AUTHENTICATE_IMAGE) \
)
#define hab_rvt_entry_p \
( \
- ((is_cpu_type(MXC_CPU_MX6Q) || \
- is_cpu_type(MXC_CPU_MX6D)) && \
- (soc_rev() >= CHIP_REV_1_5)) ? \
+ (is_mx6dq() && (soc_rev() >= CHIP_REV_1_5)) ? \
((hab_rvt_entry_t *)HAB_RVT_ENTRY_NEW) : \
- ((is_cpu_type(MXC_CPU_MX6DL) || \
- is_cpu_type(MXC_CPU_MX6SOLO)) && \
- (soc_rev() >= CHIP_REV_1_2)) ? \
+ (is_mx6sdl() && (soc_rev() >= CHIP_REV_1_2)) ? \
((hab_rvt_entry_t *)HAB_RVT_ENTRY_NEW) : \
((hab_rvt_entry_t *)HAB_RVT_ENTRY) \
)
#define hab_rvt_exit_p \
( \
- ((is_cpu_type(MXC_CPU_MX6Q) || \
- is_cpu_type(MXC_CPU_MX6D)) && \
- (soc_rev() >= CHIP_REV_1_5)) ? \
+ (is_mx6dq() && (soc_rev() >= CHIP_REV_1_5)) ? \
((hab_rvt_exit_t *)HAB_RVT_EXIT_NEW) : \
- ((is_cpu_type(MXC_CPU_MX6DL) || \
- is_cpu_type(MXC_CPU_MX6SOLO)) && \
- (soc_rev() >= CHIP_REV_1_2)) ? \
+ (is_mx6sdl() && (soc_rev() >= CHIP_REV_1_2)) ? \
((hab_rvt_exit_t *)HAB_RVT_EXIT_NEW) : \
((hab_rvt_exit_t *)HAB_RVT_EXIT) \
)
@@ -429,8 +409,7 @@ uint32_t authenticate_image(uint32_t ddr_start, uint32_t image_size)
*/
/* Check MMU enabled */
if (is_soc_type(MXC_SOC_MX6) && get_cr() & CR_M) {
- if (is_cpu_type(MXC_CPU_MX6Q) ||
- is_cpu_type(MXC_CPU_MX6D)) {
+ if (is_mx6dq()) {
/*
* This won't work on Rev 1.0.0 of
* i.MX6Q/D, since their ROM doesn't
@@ -439,10 +418,9 @@ uint32_t authenticate_image(uint32_t ddr_start, uint32_t image_size)
*/
if (!is_mx6dqp())
writel(1, MX6DQ_PU_IROM_MMU_EN_VAR);
- } else if (is_cpu_type(MXC_CPU_MX6DL) ||
- is_cpu_type(MXC_CPU_MX6SOLO)) {
+ } else if (is_mx6sdl()) {
writel(1, MX6DLS_PU_IROM_MMU_EN_VAR);
- } else if (is_cpu_type(MXC_CPU_MX6SL)) {
+ } else if (is_mx6sl()) {
writel(1, MX6SL_PU_IROM_MMU_EN_VAR);
}
}
diff --git a/arch/arm/imx-common/init.c b/arch/arm/imx-common/init.c
index 15dab1d..3d2ce3a 100644
--- a/arch/arm/imx-common/init.c
+++ b/arch/arm/imx-common/init.c
@@ -44,7 +44,7 @@ void init_aips(void)
writel(0x00000000, &aips2->opacr3);
writel(0x00000000, &aips2->opacr4);
- if (is_cpu_type(MXC_CPU_MX6SX) || is_soc_type(MXC_SOC_MX7)) {
+ if (is_mx6sx() || is_mx7()) {
/*
* Set all MPROTx to be non-bufferable, trusted for R/W,
* not forced to user-mode.
@@ -78,8 +78,7 @@ void imx_set_wdog_powerdown(bool enable)
writew(enable, &wdog1->wmcr);
writew(enable, &wdog2->wmcr);
- if (is_cpu_type(MXC_CPU_MX6SX) || is_cpu_type(MXC_CPU_MX6UL) ||
- is_soc_type(MXC_SOC_MX7))
+ if (is_mx6sx() || is_mx6ul() || is_mx7())
writew(enable, &wdog3->wmcr);
#ifdef CONFIG_MX7D
writew(enable, &wdog4->wmcr);
diff --git a/arch/arm/imx-common/iomux-v3.c b/arch/arm/imx-common/iomux-v3.c
index 228d5f8..66137d1 100644
--- a/arch/arm/imx-common/iomux-v3.c
+++ b/arch/arm/imx-common/iomux-v3.c
@@ -83,7 +83,7 @@ void imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t const *pad_list,
#if defined(CONFIG_MX6QDL)
stride = 2;
- if (!is_cpu_type(MXC_CPU_MX6Q) && !is_cpu_type(MXC_CPU_MX6D))
+ if (!is_mx6dq())
p += 1;
#else
stride = 1;
diff --git a/arch/arm/imx-common/sata.c b/arch/arm/imx-common/sata.c
index d174a46..dd9698d 100644
--- a/arch/arm/imx-common/sata.c
+++ b/arch/arm/imx-common/sata.c
@@ -15,7 +15,7 @@ int setup_sata(void)
struct iomuxc *const iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
int ret;
- if (!is_cpu_type(MXC_CPU_MX6Q) && !is_cpu_type(MXC_CPU_MX6D))
+ if (!is_mx6dq())
return 1;
ret = enable_sata_clock();
diff --git a/arch/arm/imx-common/timer.c b/arch/arm/imx-common/timer.c
index 92c7218..bea17f2 100644
--- a/arch/arm/imx-common/timer.c
+++ b/arch/arm/imx-common/timer.c
@@ -43,10 +43,8 @@ DECLARE_GLOBAL_DATA_PTR;
static inline int gpt_has_clk_source_osc(void)
{
#if defined(CONFIG_MX6)
- if (((is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D)) &&
- (soc_rev() > CHIP_REV_1_0)) || is_cpu_type(MXC_CPU_MX6DL) ||
- is_cpu_type(MXC_CPU_MX6SOLO) || is_cpu_type(MXC_CPU_MX6SX) ||
- is_cpu_type(MXC_CPU_MX6UL))
+ if (((is_mx6dq()) && (soc_rev() > CHIP_REV_1_0)) ||
+ is_mx6sdl() || is_mx6sx() || is_mx6ul())
return 1;
return 0;
@@ -86,10 +84,7 @@ int timer_init(void)
i |= GPTCR_CLKSOURCE_OSC | GPTCR_TEN;
/* For DL/S, SX, UL, set 24Mhz OSC Enable bit and prescaler */
- if (is_cpu_type(MXC_CPU_MX6DL) ||
- is_cpu_type(MXC_CPU_MX6SOLO) ||
- is_cpu_type(MXC_CPU_MX6SX) ||
- is_cpu_type(MXC_CPU_MX6UL)) {
+ if (is_mx6sdl() || is_mx6sx() || is_mx6ul()) {
i |= GPTCR_24MEN;
/* Produce 3Mhz clock */
--
2.6.2
next prev parent reply other threads:[~2016-05-23 10:35 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-23 10:35 [U-Boot] [PATCH V2 01/15] imx-common: introduce simpler macros for runtime dection Peng Fan
2016-05-23 10:35 ` [U-Boot] [PATCH V2 02/15] imx: mx6: support i.MX6SOLO when enable/disable_ldb_di_clock_sources Peng Fan
2016-05-23 10:35 ` [U-Boot] [PATCH V2 03/15] imx: mx6: use simpler runtime cpu dection macros Peng Fan
2016-05-23 10:35 ` [U-Boot] [PATCH V2 04/15] imx-common: hab: support i.MX6SOLO Peng Fan
2016-05-23 10:35 ` Peng Fan [this message]
2016-05-23 10:35 ` [U-Boot] [PATCH V2 06/15] imx: mx6: ddr: support i.MX6D/QPlus Peng Fan
2016-05-23 10:35 ` [U-Boot] [PATCH V2 07/15] imx: mx6: correct get_cpu_speed_grade_hz for i.MX6DQP Peng Fan
2016-05-23 10:35 ` [U-Boot] [PATCH V2 08/15] imx-common: hab: support i.MX6DQPlus Peng Fan
2016-05-23 10:36 ` [U-Boot] [PATCH V2 09/15] imx-common: sata: return failure if not i.MX6DQPlus Peng Fan
2016-05-23 10:36 ` [U-Boot] [PATCH V2 10/15] imx-common: timer: support i.MX6DQPlus Peng Fan
2016-05-23 10:36 ` [U-Boot] [PATCH V2 11/15] mtd: nand: mxs: use simpler runtime cpu dection macros Peng Fan
2016-05-23 10:36 ` [U-Boot] [PATCH V2 12/15] ocotp: mxc: " Peng Fan
2016-05-23 10:36 ` [U-Boot] [PATCH V2 13/15] net: fec_mxc: " Peng Fan
2016-05-24 15:15 ` Joe Hershberger
2016-05-23 10:36 ` [U-Boot] [PATCH V2 14/15] block: dwc_ahsata: support i.MX6DQPlus Peng Fan
2016-05-23 10:36 ` [U-Boot] [PATCH V2 15/15] board: mx6sabresd/auto: use simpler runtime cpu dection macros Peng Fan
2016-05-23 16:19 ` [U-Boot] [PATCH V2 01/15] imx-common: introduce simpler macros for runtime dection Stefano Babic
2016-05-24 13:04 ` Stefano Babic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1463999766-16786-5-git-send-email-van.freenix@gmail.com \
--to=van.freenix@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.