From: <gregkh@linuxfoundation.org>
To: paul.burton@imgtec.com, gregkh@linuxfoundation.org,
james.hogan@imgtec.com, ralf@linux-mips.org
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "MIPS: Use copy_s.fmt rather than copy_u.fmt" has been added to the 4.4-stable tree
Date: Sat, 04 Jun 2016 11:41:01 -0700 [thread overview]
Message-ID: <1465065661142149@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
MIPS: Use copy_s.fmt rather than copy_u.fmt
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
mips-use-copy_s.fmt-rather-than-copy_u.fmt.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From 8a3c8b48aca8771bff3536e40aa26ffb311699d1 Mon Sep 17 00:00:00 2001
From: Paul Burton <paul.burton@imgtec.com>
Date: Fri, 15 Apr 2016 10:07:23 +0100
Subject: MIPS: Use copy_s.fmt rather than copy_u.fmt
From: Paul Burton <paul.burton@imgtec.com>
commit 8a3c8b48aca8771bff3536e40aa26ffb311699d1 upstream.
In revision 1.12 of the MSA specification, the copy_u.w instruction has
been removed for MIPS32 & the copy_u.d instruction has been removed for
MIPS64. Newer toolchains (eg. Codescape SDK essentials 2015.10) will
complain about this like so:
arch/mips/kernel/r4k_fpu.S:290: Error: opcode not supported on this
processor: mips32r2 (mips32r2) `copy_u.w $1,$w26[3]'
Since we always copy to the width of a GPR, simply use copy_s instead of
copy_u to fix this.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13061/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/mips/include/asm/asmmacro.h | 24 ++++++++++++------------
arch/mips/kernel/r4k_fpu.S | 10 +++++-----
2 files changed, 17 insertions(+), 17 deletions(-)
--- a/arch/mips/include/asm/asmmacro.h
+++ b/arch/mips/include/asm/asmmacro.h
@@ -298,21 +298,21 @@
.set pop
.endm
- .macro copy_u_w ws, n
+ .macro copy_s_w ws, n
.set push
.set mips32r2
.set fp=64
.set msa
- copy_u.w $1, $w\ws[\n]
+ copy_s.w $1, $w\ws[\n]
.set pop
.endm
- .macro copy_u_d ws, n
+ .macro copy_s_d ws, n
.set push
.set mips64r2
.set fp=64
.set msa
- copy_u.d $1, $w\ws[\n]
+ copy_s.d $1, $w\ws[\n]
.set pop
.endm
@@ -346,8 +346,8 @@
#define STH_MSA_INSN 0x5800081f
#define STW_MSA_INSN 0x5800082f
#define STD_MSA_INSN 0x5800083f
-#define COPY_UW_MSA_INSN 0x58f00056
-#define COPY_UD_MSA_INSN 0x58f80056
+#define COPY_SW_MSA_INSN 0x58b00056
+#define COPY_SD_MSA_INSN 0x58b80056
#define INSERT_W_MSA_INSN 0x59300816
#define INSERT_D_MSA_INSN 0x59380816
#else
@@ -361,8 +361,8 @@
#define STH_MSA_INSN 0x78000825
#define STW_MSA_INSN 0x78000826
#define STD_MSA_INSN 0x78000827
-#define COPY_UW_MSA_INSN 0x78f00059
-#define COPY_UD_MSA_INSN 0x78f80059
+#define COPY_SW_MSA_INSN 0x78b00059
+#define COPY_SD_MSA_INSN 0x78b80059
#define INSERT_W_MSA_INSN 0x79300819
#define INSERT_D_MSA_INSN 0x79380819
#endif
@@ -461,21 +461,21 @@
.set pop
.endm
- .macro copy_u_w ws, n
+ .macro copy_s_w ws, n
.set push
.set noat
SET_HARDFLOAT
.insn
- .word COPY_UW_MSA_INSN | (\n << 16) | (\ws << 11)
+ .word COPY_SW_MSA_INSN | (\n << 16) | (\ws << 11)
.set pop
.endm
- .macro copy_u_d ws, n
+ .macro copy_s_d ws, n
.set push
.set noat
SET_HARDFLOAT
.insn
- .word COPY_UD_MSA_INSN | (\n << 16) | (\ws << 11)
+ .word COPY_SD_MSA_INSN | (\n << 16) | (\ws << 11)
.set pop
.endm
--- a/arch/mips/kernel/r4k_fpu.S
+++ b/arch/mips/kernel/r4k_fpu.S
@@ -244,17 +244,17 @@ LEAF(\name)
.set push
.set noat
#ifdef CONFIG_64BIT
- copy_u_d \wr, 1
+ copy_s_d \wr, 1
EX sd $1, \off(\base)
#elif defined(CONFIG_CPU_LITTLE_ENDIAN)
- copy_u_w \wr, 2
+ copy_s_w \wr, 2
EX sw $1, \off(\base)
- copy_u_w \wr, 3
+ copy_s_w \wr, 3
EX sw $1, (\off+4)(\base)
#else /* CONFIG_CPU_BIG_ENDIAN */
- copy_u_w \wr, 2
+ copy_s_w \wr, 2
EX sw $1, (\off+4)(\base)
- copy_u_w \wr, 3
+ copy_s_w \wr, 3
EX sw $1, \off(\base)
#endif
.set pop
Patches currently in stable-queue which might be from paul.burton@imgtec.com are
queue-4.4/mips-disable-preemption-during-prctl-pr_set_fp_mode.patch
queue-4.4/mips-fix-sigreturn-via-vdso-on-micromips-kernel.patch
queue-4.4/mips-handle-highmem-pages-in-__update_cache.patch
queue-4.4/mips-fix-watchpoint-restoration.patch
queue-4.4/mips-build-micromips-vdso-for-micromips-kernels.patch
queue-4.4/mips-math-emu-fix-jalr-emulation-when-rd-0.patch
queue-4.4/mips-sync-icache-dcache-in-set_pte_at.patch
queue-4.4/mips-fix-msa-ld_-st_-asm-macros-to-use-ptr_addu.patch
queue-4.4/mips-prevent-restoration-of-msa-context-in-non-msa-kernels.patch
queue-4.4/mips-use-copy_s.fmt-rather-than-copy_u.fmt.patch
reply other threads:[~2016-06-04 18:41 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1465065661142149@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=james.hogan@imgtec.com \
--cc=paul.burton@imgtec.com \
--cc=ralf@linux-mips.org \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.