From: <gregkh@linuxfoundation.org>
To: udknight@gmail.com, Larry.Finger@lwfinger.net,
gregkh@linuxfoundation.org, kvalo@codeaurora.org
Cc: <stable@vger.kernel.org>, <stable-commits@vger.kernel.org>
Subject: Patch "rtlwifi: pci: use dev_kfree_skb_irq instead of kfree_skb in rtl_pci_reset_trx_ring" has been added to the 4.4-stable tree
Date: Sat, 04 Jun 2016 12:18:57 -0700 [thread overview]
Message-ID: <1465067937190203@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
rtlwifi: pci: use dev_kfree_skb_irq instead of kfree_skb in rtl_pci_reset_trx_ring
to the 4.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
rtlwifi-pci-use-dev_kfree_skb_irq-instead-of-kfree_skb-in-rtl_pci_reset_trx_ring.patch
and it can be found in the queue-4.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger.kernel.org> know about it.
>From cf968937d27751296920e6b82ffa89735e3a0023 Mon Sep 17 00:00:00 2001
From: wang yanqing <udknight@gmail.com>
Date: Sat, 7 May 2016 00:33:53 +0800
Subject: rtlwifi: pci: use dev_kfree_skb_irq instead of kfree_skb in rtl_pci_reset_trx_ring
From: wang yanqing <udknight@gmail.com>
commit cf968937d27751296920e6b82ffa89735e3a0023 upstream.
We can't use kfree_skb in irq disable context, because spin_lock_irqsave
make sure we are always in irq disable context, use dev_kfree_skb_irq
instead of kfree_skb is better than dev_kfree_skb_any.
This patch fix below kernel warning:
[ 7612.095528] ------------[ cut here ]------------
[ 7612.095546] WARNING: CPU: 3 PID: 4460 at kernel/softirq.c:150 __local_bh_enable_ip+0x58/0x80()
[ 7612.095550] Modules linked in: rtl8723be x86_pkg_temp_thermal btcoexist rtl_pci rtlwifi rtl8723_common
[ 7612.095567] CPU: 3 PID: 4460 Comm: ifconfig Tainted: G W 4.4.0+ #4
[ 7612.095570] Hardware name: LENOVO 20DFA04FCD/20DFA04FCD, BIOS J5ET48WW (1.19 ) 08/27/2015
[ 7612.095574] 00000000 00000000 da37fc70 c12ce7c5 00000000 da37fca0 c104cc59 c19d4454
[ 7612.095584] 00000003 0000116c c19d4784 00000096 c10508a8 c10508a8 00000200 c1b42400
[ 7612.095594] f29be780 da37fcb0 c104ccad 00000009 00000000 da37fcbc c10508a8 f21f08b8
[ 7612.095604] Call Trace:
[ 7612.095614] [<c12ce7c5>] dump_stack+0x41/0x5c
[ 7612.095620] [<c104cc59>] warn_slowpath_common+0x89/0xc0
[ 7612.095628] [<c10508a8>] ? __local_bh_enable_ip+0x58/0x80
[ 7612.095634] [<c10508a8>] ? __local_bh_enable_ip+0x58/0x80
[ 7612.095640] [<c104ccad>] warn_slowpath_null+0x1d/0x20
[ 7612.095646] [<c10508a8>] __local_bh_enable_ip+0x58/0x80
[ 7612.095653] [<c16b7d34>] destroy_conntrack+0x64/0xa0
[ 7612.095660] [<c16b300f>] nf_conntrack_destroy+0xf/0x20
[ 7612.095665] [<c1677565>] skb_release_head_state+0x55/0xa0
[ 7612.095670] [<c16775bb>] skb_release_all+0xb/0x20
[ 7612.095674] [<c167760b>] __kfree_skb+0xb/0x60
[ 7612.095679] [<c16776f0>] kfree_skb+0x30/0x70
[ 7612.095686] [<f81b869d>] ? rtl_pci_reset_trx_ring+0x22d/0x370 [rtl_pci]
[ 7612.095692] [<f81b869d>] rtl_pci_reset_trx_ring+0x22d/0x370 [rtl_pci]
[ 7612.095698] [<f81b87f9>] rtl_pci_start+0x19/0x190 [rtl_pci]
[ 7612.095705] [<f81970e6>] rtl_op_start+0x56/0x90 [rtlwifi]
[ 7612.095712] [<c17e3f16>] drv_start+0x36/0xc0
[ 7612.095717] [<c17f5ab3>] ieee80211_do_open+0x2d3/0x890
[ 7612.095725] [<c16820fe>] ? call_netdevice_notifiers_info+0x2e/0x60
[ 7612.095730] [<c17f60bd>] ieee80211_open+0x4d/0x50
[ 7612.095736] [<c16891b3>] __dev_open+0xa3/0x130
[ 7612.095742] [<c183fa53>] ? _raw_spin_unlock_bh+0x13/0x20
[ 7612.095748] [<c1689499>] __dev_change_flags+0x89/0x140
[ 7612.095753] [<c127c70d>] ? selinux_capable+0xd/0x10
[ 7612.095759] [<c1689589>] dev_change_flags+0x29/0x60
[ 7612.095765] [<c1700b93>] devinet_ioctl+0x553/0x670
[ 7612.095772] [<c12db758>] ? _copy_to_user+0x28/0x40
[ 7612.095777] [<c17018b5>] inet_ioctl+0x85/0xb0
[ 7612.095783] [<c166e647>] sock_ioctl+0x67/0x260
[ 7612.095788] [<c166e5e0>] ? sock_fasync+0x80/0x80
[ 7612.095795] [<c115c99b>] do_vfs_ioctl+0x6b/0x550
[ 7612.095800] [<c127c812>] ? selinux_file_ioctl+0x102/0x1e0
[ 7612.095807] [<c10a8914>] ? timekeeping_suspend+0x294/0x320
[ 7612.095813] [<c10a256a>] ? __hrtimer_run_queues+0x14a/0x210
[ 7612.095820] [<c1276e24>] ? security_file_ioctl+0x34/0x50
[ 7612.095827] [<c115cef0>] SyS_ioctl+0x70/0x80
[ 7612.095832] [<c1001804>] do_fast_syscall_32+0x84/0x120
[ 7612.095839] [<c183ff91>] sysenter_past_esp+0x36/0x55
[ 7612.095844] ---[ end trace 97e9c637a20e8348 ]---
Signed-off-by: Wang YanQing <udknight@gmail.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/wireless/realtek/rtlwifi/pci.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/wireless/realtek/rtlwifi/pci.c
+++ b/drivers/net/wireless/realtek/rtlwifi/pci.c
@@ -1573,7 +1573,7 @@ int rtl_pci_reset_trx_ring(struct ieee80
true,
HW_DESC_TXBUFF_ADDR),
skb->len, PCI_DMA_TODEVICE);
- kfree_skb(skb);
+ dev_kfree_skb_irq(skb);
ring->idx = (ring->idx + 1) % ring->entries;
}
ring->idx = 0;
Patches currently in stable-queue which might be from udknight@gmail.com are
queue-4.4/rtlwifi-pci-use-dev_kfree_skb_irq-instead-of-kfree_skb-in-rtl_pci_reset_trx_ring.patch
queue-4.4/rtlwifi-fix-logic-error-in-enter-exit-power-save-mode.patch
reply other threads:[~2016-06-04 19:18 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1465067937190203@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=Larry.Finger@lwfinger.net \
--cc=kvalo@codeaurora.org \
--cc=stable-commits@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=udknight@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.