From: Parth Sane <laerdevstudios@gmail.com>
To: gregkh@linuxfoundation.org
Cc: Larry.Finger@lwfinger.net, florian.c.schilhabel@googlemail.com,
luisbg@osg.samsung.com, punitvara@gmail.com,
stillcompiling@gmail.com, bhaktipriya96@gmail.com,
devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org,
Parth Sane <laerdevstudios@gmail.com>
Subject: [PATCH] staging: rtl8712: Fixed multiple parenthesis alignment warnings in ieee80211.c
Date: Wed, 8 Jun 2016 16:57:45 +0530 [thread overview]
Message-ID: <1465385265-25558-1-git-send-email-laerdevstudios@gmail.com> (raw)
Multiple parenthesis alignment warnings were thrown by checkpatch in ieee80211.c
This patch effectively fixes that.
Signed-off-by: Parth Sane <laerdevstudios@gmail.com>
---
drivers/staging/rtl8712/ieee80211.c | 25 ++++++++++++-------------
1 file changed, 12 insertions(+), 13 deletions(-)
diff --git a/drivers/staging/rtl8712/ieee80211.c b/drivers/staging/rtl8712/ieee80211.c
index 8918654..5dc3b5b 100644
--- a/drivers/staging/rtl8712/ieee80211.c
+++ b/drivers/staging/rtl8712/ieee80211.c
@@ -145,7 +145,7 @@ static void set_supported_rate(u8 *rates, uint mode)
case WIRELESS_11BG:
memcpy(rates, WIFI_CCKRATES, IEEE80211_CCK_RATE_LEN);
memcpy(rates + IEEE80211_CCK_RATE_LEN, WIFI_OFDMRATES,
- IEEE80211_NUM_OFDM_RATESLEN);
+ IEEE80211_NUM_OFDM_RATESLEN);
break;
}
}
@@ -188,24 +188,24 @@ int r8712_generate_ie(struct registry_priv *pregistrypriv)
ie += 2;
/*SSID*/
ie = r8712_set_ie(ie, _SSID_IE_, pdev_network->Ssid.SsidLength,
- pdev_network->Ssid.Ssid, &sz);
+ pdev_network->Ssid.Ssid, &sz);
/*supported rates*/
set_supported_rate(pdev_network->rates, pregistrypriv->wireless_mode);
rateLen = r8712_get_rateset_len(pdev_network->rates);
if (rateLen > 8) {
ie = r8712_set_ie(ie, _SUPPORTEDRATES_IE_, 8,
- pdev_network->rates, &sz);
+ pdev_network->rates, &sz);
ie = r8712_set_ie(ie, _EXT_SUPPORTEDRATES_IE_, (rateLen - 8),
- (pdev_network->rates + 8), &sz);
+ (pdev_network->rates + 8), &sz);
} else
ie = r8712_set_ie(ie, _SUPPORTEDRATES_IE_,
- rateLen, pdev_network->rates, &sz);
+ rateLen, pdev_network->rates, &sz);
/*DS parameter set*/
ie = r8712_set_ie(ie, _DSSET_IE_, 1,
- (u8 *)&(pdev_network->Configuration.DSConfig), &sz);
+ (u8 *)&(pdev_network->Configuration.DSConfig), &sz);
/*IBSS Parameter Set*/
ie = r8712_set_ie(ie, _IBSS_PARA_IE_, 2,
- (u8 *)&(pdev_network->Configuration.ATIMWindow), &sz);
+ (u8 *)&(pdev_network->Configuration.ATIMWindow), &sz);
return sz;
}
@@ -220,8 +220,7 @@ unsigned char *r8712_get_wpa_ie(unsigned char *pie, int *wpa_ie_len, int limit)
pbuf = r8712_get_ie(pbuf, _WPA_IE_ID_, &len, limit);
if (pbuf) {
/*check if oui matches...*/
- if (memcmp((pbuf + 2), wpa_oui_type,
- sizeof(wpa_oui_type)))
+ if (memcmp((pbuf + 2), wpa_oui_type, sizeof(wpa_oui_type)))
goto check_next_ie;
/*check version...*/
memcpy((u8 *)&val16, (pbuf + 6), sizeof(val16));
@@ -279,7 +278,7 @@ static int r8712_get_wpa2_cipher_suite(u8 *s)
}
int r8712_parse_wpa_ie(u8 *wpa_ie, int wpa_ie_len, int *group_cipher,
- int *pairwise_cipher)
+ int *pairwise_cipher)
{
int i;
int left, count;
@@ -322,7 +321,7 @@ int r8712_parse_wpa_ie(u8 *wpa_ie, int wpa_ie_len, int *group_cipher,
}
int r8712_parse_wpa2_ie(u8 *rsn_ie, int rsn_ie_len, int *group_cipher,
- int *pairwise_cipher)
+ int *pairwise_cipher)
{
int i;
int left, count;
@@ -365,7 +364,7 @@ int r8712_parse_wpa2_ie(u8 *rsn_ie, int rsn_ie_len, int *group_cipher,
}
int r8712_get_sec_ie(u8 *in_ie, uint in_len, u8 *rsn_ie, u16 *rsn_len,
- u8 *wpa_ie, u16 *wpa_len)
+ u8 *wpa_ie, u16 *wpa_len)
{
u8 authmode;
u8 wpa_oui[4] = {0x0, 0x50, 0xf2, 0x01};
@@ -383,7 +382,7 @@ int r8712_get_sec_ie(u8 *in_ie, uint in_len, u8 *rsn_ie, u16 *rsn_len,
} else {
if (authmode == _WPA2_IE_ID_) {
memcpy(rsn_ie, &in_ie[cnt],
- in_ie[cnt + 1] + 2);
+ in_ie[cnt + 1] + 2);
*rsn_len = in_ie[cnt + 1] + 2;
cnt += in_ie[cnt + 1] + 2; /*get next*/
} else {
--
1.9.1
next reply other threads:[~2016-06-08 11:27 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-08 11:27 Parth Sane [this message]
2016-06-08 11:31 ` [PATCH] staging: rtl8712: Fixed multiple parenthesis alignment warnings in ieee80211.c Luis de Bethencourt
2016-06-08 11:37 ` Parth Sane
[not found] ` <5758064E.6080709@osg.samsung.com>
2016-06-08 11:58 ` Parth Sane
[not found] ` <57580C8B.6040204@osg.samsung.com>
2016-06-08 12:25 ` Parth Sane
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1465385265-25558-1-git-send-email-laerdevstudios@gmail.com \
--to=laerdevstudios@gmail.com \
--cc=Larry.Finger@lwfinger.net \
--cc=bhaktipriya96@gmail.com \
--cc=devel@driverdev.osuosl.org \
--cc=florian.c.schilhabel@googlemail.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luisbg@osg.samsung.com \
--cc=punitvara@gmail.com \
--cc=stillcompiling@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.