From: "H. Peter Anvin" <hpa@linux.intel.com>
To: Ingo Molnar <mingo@kernel.org>,
Thomas Gleixner <tglx@linutronix.de>,
"H. Peter Anvin" <hpa@zytor.com>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>,
Borislav Petkov <bp@alien8.de>,
"H. Peter Anvin" <hpa@linux.intel.com>
Subject: [PATCH v2 10/10] x86, asm: Use CC_SET()/CC_OUT() and static_cpu_has() in archrandom.h
Date: Wed, 8 Jun 2016 12:38:46 -0700 [thread overview]
Message-ID: <1465414726-197858-11-git-send-email-hpa@linux.intel.com> (raw)
In-Reply-To: <1465414726-197858-1-git-send-email-hpa@linux.intel.com>
Use CC_SET()/CC_OUT() and static_cpu_has(). This produces code good
enough to eliminate ad hoc use of alternatives in <asm/archrandom.h>,
greatly simplifying the code.
While we are at it, make x86_init_rdrand() compile out completely if
we don't need it.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
v2: fix a conflict between <linux/random.h> and <asm/archrandom.h>
discovered by Ingo Molnar. There are a few places in x86-specific
code where we need all of <arch/archrandom.h> even when
CONFIG_ARCH_RANDOM is disabled, so <linux/random.h> does not
suffice.
---
arch/x86/include/asm/archrandom.h | 128 ++++++++++++++++++--------------------
arch/x86/kernel/cpu/rdrand.c | 4 +-
2 files changed, 62 insertions(+), 70 deletions(-)
diff --git a/arch/x86/include/asm/archrandom.h b/arch/x86/include/asm/archrandom.h
index ab6f599..5b0579a 100644
--- a/arch/x86/include/asm/archrandom.h
+++ b/arch/x86/include/asm/archrandom.h
@@ -25,8 +25,6 @@
#include <asm/processor.h>
#include <asm/cpufeature.h>
-#include <asm/alternative.h>
-#include <asm/nops.h>
#define RDRAND_RETRY_LOOPS 10
@@ -40,97 +38,91 @@
# define RDSEED_LONG RDSEED_INT
#endif
-#ifdef CONFIG_ARCH_RANDOM
+/* Unconditional execution of RDRAND and RDSEED */
-/* Instead of arch_get_random_long() when alternatives haven't run. */
static inline bool rdrand_long(unsigned long *v)
{
- int ok;
- asm volatile("1: " RDRAND_LONG "\n\t"
- "jc 2f\n\t"
- "decl %0\n\t"
- "jnz 1b\n\t"
- "2:"
- : "=r" (ok), "=a" (*v)
- : "0" (RDRAND_RETRY_LOOPS));
- return !!ok;
+ bool ok;
+ unsigned int retry = RDRAND_RETRY_LOOPS;
+ do {
+ asm volatile(RDRAND_LONG "\n\t"
+ CC_SET(c)
+ : CC_OUT(c) (ok), "=a" (*v));
+ if (ok)
+ return true;
+ } while (--retry);
+ return false;
+}
+
+static inline bool rdrand_int(unsigned int *v)
+{
+ bool ok;
+ unsigned int retry = RDRAND_RETRY_LOOPS;
+ do {
+ asm volatile(RDRAND_INT "\n\t"
+ CC_SET(c)
+ : CC_OUT(c) (ok), "=a" (*v));
+ if (ok)
+ return true;
+ } while (--retry);
+ return false;
}
-/* A single attempt at RDSEED */
static inline bool rdseed_long(unsigned long *v)
{
bool ok;
asm volatile(RDSEED_LONG "\n\t"
- "setc %0"
- : "=qm" (ok), "=a" (*v));
+ CC_SET(c)
+ : CC_OUT(c) (ok), "=a" (*v));
return ok;
}
-#define GET_RANDOM(name, type, rdrand, nop) \
-static inline bool name(type *v) \
-{ \
- int ok; \
- alternative_io("movl $0, %0\n\t" \
- nop, \
- "\n1: " rdrand "\n\t" \
- "jc 2f\n\t" \
- "decl %0\n\t" \
- "jnz 1b\n\t" \
- "2:", \
- X86_FEATURE_RDRAND, \
- ASM_OUTPUT2("=r" (ok), "=a" (*v)), \
- "0" (RDRAND_RETRY_LOOPS)); \
- return !!ok; \
-}
-
-#define GET_SEED(name, type, rdseed, nop) \
-static inline bool name(type *v) \
-{ \
- bool ok; \
- alternative_io("movb $0, %0\n\t" \
- nop, \
- rdseed "\n\t" \
- "setc %0", \
- X86_FEATURE_RDSEED, \
- ASM_OUTPUT2("=q" (ok), "=a" (*v))); \
- return ok; \
+static inline bool rdseed_int(unsigned int *v)
+{
+ bool ok;
+ asm volatile(RDSEED_INT "\n\t"
+ CC_SET(c)
+ : CC_OUT(c) (ok), "=a" (*v));
+ return ok;
}
-#ifdef CONFIG_X86_64
-
-GET_RANDOM(arch_get_random_long, unsigned long, RDRAND_LONG, ASM_NOP5);
-GET_RANDOM(arch_get_random_int, unsigned int, RDRAND_INT, ASM_NOP4);
-
-GET_SEED(arch_get_random_seed_long, unsigned long, RDSEED_LONG, ASM_NOP5);
-GET_SEED(arch_get_random_seed_int, unsigned int, RDSEED_INT, ASM_NOP4);
-
-#else
-
-GET_RANDOM(arch_get_random_long, unsigned long, RDRAND_LONG, ASM_NOP3);
-GET_RANDOM(arch_get_random_int, unsigned int, RDRAND_INT, ASM_NOP3);
-
-GET_SEED(arch_get_random_seed_long, unsigned long, RDSEED_LONG, ASM_NOP4);
-GET_SEED(arch_get_random_seed_int, unsigned int, RDSEED_INT, ASM_NOP4);
-
-#endif /* CONFIG_X86_64 */
-
+/* Conditional execution based on CPU type */
#define arch_has_random() static_cpu_has(X86_FEATURE_RDRAND)
#define arch_has_random_seed() static_cpu_has(X86_FEATURE_RDSEED)
-#else
+/*
+ * These are the generic interfaces; they must not be declared if the
+ * stubs in <linux/random.h> are to be invoked,
+ * i.e. CONFIG_ARCH_RANDOM is not defined.
+ */
+#ifdef CONFIG_ARCH_RANDOM
-static inline bool rdrand_long(unsigned long *v)
+static inline bool arch_get_random_long(unsigned long *v)
{
- return 0;
+ return arch_has_random() ? rdrand_long(v) : false;
}
-static inline bool rdseed_long(unsigned long *v)
+static inline bool arch_get_random_int(unsigned int *v)
{
- return 0;
+ return arch_has_random() ? rdrand_int(v) : false;
}
-#endif /* CONFIG_ARCH_RANDOM */
+static inline bool arch_get_random_seed_long(unsigned long *v)
+{
+ return arch_has_random_seed() ? rdseed_long(v) : false;
+}
+
+static inline bool arch_get_random_seed_int(unsigned int *v)
+{
+ return arch_has_random_seed() ? rdseed_int(v) : false;
+}
extern void x86_init_rdrand(struct cpuinfo_x86 *c);
+#else /* !CONFIG_ARCH_RANDOM */
+
+static inline void x86_init_rdrand(struct cpuinfo_x86 *c) { }
+
+#endif /* !CONFIG_ARCH_RANDOM */
+
#endif /* ASM_X86_ARCHRANDOM_H */
diff --git a/arch/x86/kernel/cpu/rdrand.c b/arch/x86/kernel/cpu/rdrand.c
index f6f50c4..cfa97ff 100644
--- a/arch/x86/kernel/cpu/rdrand.c
+++ b/arch/x86/kernel/cpu/rdrand.c
@@ -39,9 +39,9 @@ __setup("nordrand", x86_rdrand_setup);
*/
#define SANITY_CHECK_LOOPS 8
+#ifdef CONFIG_ARCH_RANDOM
void x86_init_rdrand(struct cpuinfo_x86 *c)
{
-#ifdef CONFIG_ARCH_RANDOM
unsigned long tmp;
int i;
@@ -55,5 +55,5 @@ void x86_init_rdrand(struct cpuinfo_x86 *c)
return;
}
}
-#endif
}
+#endif
--
2.7.3.0.11.gd79db92
next prev parent reply other threads:[~2016-06-08 19:39 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-08 19:38 [PATCH v2 00/10] x86: use gcc 6+ asm flag output feature H. Peter Anvin
2016-06-08 19:38 ` [PATCH v2 01/10] x86, bitops: remove use of "sbb" to return CF H. Peter Anvin
2016-06-08 19:45 ` [tip:x86/asm] " tip-bot for H. Peter Anvin
2016-06-08 19:38 ` [PATCH v2 02/10] x86, asm: use bool for bitops and other assembly outputs H. Peter Anvin
2016-06-08 19:46 ` [tip:x86/asm] " tip-bot for H. Peter Anvin
2016-06-08 19:38 ` [PATCH v2 03/10] x86, asm: change the GEN_*_RMWcc() macros to not quote the condition H. Peter Anvin
2016-06-08 19:46 ` [tip:x86/asm] " tip-bot for H. Peter Anvin
2016-06-08 19:38 ` [PATCH v2 04/10] x86, asm: define CC_SET() and CC_OUT() macros H. Peter Anvin
2016-06-08 19:47 ` [tip:x86/asm] " tip-bot for H. Peter Anvin
2016-06-08 19:38 ` [PATCH v2 05/10] x86, asm: change GEN_*_RMWcc() to use CC_SET()/CC_OUT() H. Peter Anvin
2016-06-08 19:47 ` [tip:x86/asm] " tip-bot for H. Peter Anvin
2016-06-08 19:38 ` [PATCH v2 06/10] x86, asm: Use CC_SET()/CC_OUT() in <asm/bitops.h> H. Peter Anvin
2016-06-08 19:48 ` [tip:x86/asm] " tip-bot for H. Peter Anvin
2016-06-08 19:38 ` [PATCH v2 07/10] x86, asm: Use CC_SET()/CC_OUT() in <asm/percpu.h> H. Peter Anvin
2016-06-08 19:48 ` [tip:x86/asm] " tip-bot for H. Peter Anvin
2016-06-08 19:38 ` [PATCH v2 08/10] x86, asm: Use CC_SET()/CC_OUT() in <asm/rwsem.h> H. Peter Anvin
2016-06-08 19:49 ` [tip:x86/asm] " tip-bot for H. Peter Anvin
2016-06-08 19:38 ` [PATCH v2 09/10] x86, asm, boot: Use CC_SET()/CC_OUT() in arch/x86/boot/boot.h H. Peter Anvin
2016-06-08 19:49 ` [tip:x86/asm] " tip-bot for H. Peter Anvin
2016-06-08 19:38 ` H. Peter Anvin [this message]
2016-06-08 19:49 ` [tip:x86/asm] x86, asm: Use CC_SET()/CC_OUT() and static_cpu_has() in archrandom.h tip-bot for H. Peter Anvin
2016-06-09 15:49 ` [PATCH v2 10/10] " Borislav Petkov
2016-06-08 21:30 ` [PATCH v2 00/10] x86: use gcc 6+ asm flag output feature H. Peter Anvin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1465414726-197858-11-git-send-email-hpa@linux.intel.com \
--to=hpa@linux.intel.com \
--cc=bp@alien8.de \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=luto@amacapital.net \
--cc=mingo@kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.