All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Daniel P. Berrange" <berrange@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Peter Maydell" <peter.maydell@linaro.org>,
	"Stefan Hajnoczi" <stefanha@redhat.com>,
	"Eric Blake" <eblake@redhat.com>,
	"Lluís Vilanova" <vilanova@ac.upc.edu>,
	"Gerd Hoffmann" <kraxel@redhat.com>,
	"Daniel P. Berrange" <berrange@redhat.com>
Subject: [Qemu-devel] [PATCH v2 14/40] trace: split out trace events for hw/usb/ directory
Date: Thu, 16 Jun 2016 09:40:00 +0100	[thread overview]
Message-ID: <1466066426-16657-15-git-send-email-berrange@redhat.com> (raw)
In-Reply-To: <1466066426-16657-1-git-send-email-berrange@redhat.com>

Move all trace-events for files in the hw/usb/ directory to
their own file.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
---
 Makefile.objs       |   1 +
 hw/usb/trace-events | 268 ++++++++++++++++++++++++++++++++++++++++++++++++++++
 trace-events        | 267 ---------------------------------------------------
 3 files changed, 269 insertions(+), 267 deletions(-)
 create mode 100644 hw/usb/trace-events

diff --git a/Makefile.objs b/Makefile.objs
index 4f0ccbe..e0e6084 100644
--- a/Makefile.objs
+++ b/Makefile.objs
@@ -131,3 +131,4 @@ trace-events-y += hw/net/trace-events
 trace-events-y += hw/virtio/trace-events
 trace-events-y += hw/audio/trace-events
 trace-events-y += hw/misc/trace-events
+trace-events-y += hw/usb/trace-events
diff --git a/hw/usb/trace-events b/hw/usb/trace-events
new file mode 100644
index 0000000..ac2d951
--- /dev/null
+++ b/hw/usb/trace-events
@@ -0,0 +1,268 @@
+# See docs/trace-events.txt for syntax documentation.
+
+# hw/usb/core.c
+usb_packet_state_change(int bus, const char *port, int ep, void *p, const char *o, const char *n) "bus %d, port %s, ep %d, packet %p, state %s -> %s"
+usb_packet_state_fault(int bus, const char *port, int ep, void *p, const char *o, const char *n) "bus %d, port %s, ep %d, packet %p, state %s, expected %s"
+
+# hw/usb/bus.c
+usb_port_claim(int bus, const char *port) "bus %d, port %s"
+usb_port_attach(int bus, const char *port, const char *devspeed, const char *portspeed) "bus %d, port %s, devspeed %s, portspeed %s"
+usb_port_detach(int bus, const char *port) "bus %d, port %s"
+usb_port_release(int bus, const char *port) "bus %d, port %s"
+
+# hw/usb/hcd-ohci.c
+usb_ohci_iso_td_read_failed(uint32_t addr) "ISO_TD read error at %x"
+usb_ohci_iso_td_head(uint32_t head, uint32_t tail, uint32_t flags, uint32_t bp, uint32_t next, uint32_t be, uint32_t framenum, uint32_t startframe, uint32_t framecount, int rel_frame_num) "ISO_TD ED head 0x%.8x tailp 0x%.8x\n0x%.8x 0x%.8x 0x%.8x 0x%.8x\nframe_number 0x%.8x starting_frame 0x%.8x\nframe_count  0x%.8x relative %d"
+usb_ohci_iso_td_head_offset(uint32_t o0, uint32_t o1, uint32_t o2, uint32_t o3, uint32_t o4, uint32_t o5, uint32_t o6, uint32_t o7) "0x%.8x 0x%.8x 0x%.8x 0x%.8x 0x%.8x 0x%.8x 0x%.8x 0x%.8x"
+usb_ohci_iso_td_relative_frame_number_neg(int rel) "ISO_TD R=%d < 0"
+usb_ohci_iso_td_relative_frame_number_big(int rel, int count) "ISO_TD R=%d > FC=%d"
+usb_ohci_iso_td_bad_direction(int dir) "Bad direction %d"
+usb_ohci_iso_td_bad_bp_be(uint32_t bp, uint32_t be) "ISO_TD bp 0x%.8x be 0x%.8x"
+usb_ohci_iso_td_bad_cc_not_accessed(uint32_t start, uint32_t next) "ISO_TD cc != not accessed 0x%.8x 0x%.8x"
+usb_ohci_iso_td_bad_cc_overrun(uint32_t start, uint32_t next) "ISO_TD start_offset=0x%.8x > next_offset=0x%.8x"
+usb_ohci_iso_td_so(uint32_t so, uint32_t eo, uint32_t s, uint32_t e, const char *str, ssize_t len, int ret) "0x%.8x eo 0x%.8x\nsa 0x%.8x ea 0x%.8x\ndir %s len %zu ret %d"
+usb_ohci_iso_td_data_overrun(int ret, ssize_t len) "DataOverrun %d > %zu"
+usb_ohci_iso_td_data_underrun(int ret) "DataUnderrun %d"
+usb_ohci_iso_td_nak(int ret) "got NAK/STALL %d"
+usb_ohci_iso_td_bad_response(int ret) "Bad device response %d"
+usb_ohci_port_attach(int index) "port #%d"
+usb_ohci_port_detach(int index) "port #%d"
+usb_ohci_port_wakeup(int index) "port #%d"
+usb_ohci_port_suspend(int index) "port #%d"
+usb_ohci_port_reset(int index) "port #%d"
+usb_ohci_remote_wakeup(const char *s) "%s: SUSPEND->RESUME"
+usb_ohci_reset(const char *s) "%s"
+usb_ohci_start(const char *s) "%s: USB Operational"
+usb_ohci_resume(const char *s) "%s: USB Resume"
+usb_ohci_stop(const char *s) "%s: USB Suspended"
+usb_ohci_exit(const char *s) "%s"
+usb_ohci_set_ctl(const char *s, uint32_t new_state) "%s: new state 0x%x"
+usb_ohci_td_underrun(void) ""
+usb_ohci_td_dev_error(void) ""
+usb_ohci_td_nak(void) ""
+usb_ohci_td_stall(void) ""
+usb_ohci_td_babble(void) ""
+usb_ohci_td_bad_device_response(int rc) "%d"
+usb_ohci_td_read_error(uint32_t addr) "TD read error at %x"
+usb_ohci_td_bad_direction(int dir) "Bad direction %d"
+usb_ohci_td_skip_async(void) ""
+usb_ohci_td_pkt_hdr(uint32_t addr, int64_t pktlen, int64_t len, const char *s, int flag_r, uint32_t cbp, uint32_t be) " TD @ 0x%.8x %" PRId64 " of %" PRId64 " bytes %s r=%d cbp=0x%.8x be=0x%.8x"
+usb_ohci_td_pkt_short(const char *dir, const char *buf) "%s data: %s"
+usb_ohci_td_pkt_full(const char *dir, const char *buf) "%s data: %s"
+usb_ohci_td_too_many_pending(void) ""
+usb_ohci_td_packet_status(int status) "status=%d"
+usb_ohci_ed_read_error(uint32_t addr) "ED read error at %x"
+usb_ohci_ed_pkt(uint32_t cur, int h, int c, uint32_t head, uint32_t tail, uint32_t next) "ED @ 0x%.8x h=%u c=%u\n  head=0x%.8x tailp=0x%.8x next=0x%.8x"
+usb_ohci_ed_pkt_flags(uint32_t fa, uint32_t en, uint32_t d, int s, int k, int f, uint32_t mps) "fa=%u en=%u d=%u s=%u k=%u f=%u mps=%u"
+usb_ohci_hcca_read_error(uint32_t addr) "HCCA read error at %x"
+usb_ohci_mem_read_unaligned(uint32_t addr) "at %x"
+usb_ohci_mem_read_bad_offset(uint32_t addr) "%x"
+usb_ohci_mem_write_unaligned(uint32_t addr) "at %x"
+usb_ohci_mem_write_bad_offset(uint32_t addr) "%x"
+usb_ohci_process_lists(uint32_t head, uint32_t cur) "head %x, cur %x"
+usb_ohci_bus_eof_timer_failed(const char *name) "%s: timer_new_ns failed"
+usb_ohci_set_frame_interval(const char *name, uint16_t fi_x, uint16_t fi_u) "%s: FrameInterval = 0x%x (%u)"
+usb_ohci_hub_power_up(void) "powered up all ports"
+usb_ohci_hub_power_down(void) "powered down all ports"
+usb_ohci_init_time(int64_t frametime, int64_t bittime) "usb_bit_time=%" PRId64 " usb_frame_time=%" PRId64
+usb_ohci_die(void) ""
+usb_ohci_async_complete(void) ""
+
+# hw/usb/hcd-ehci.c
+usb_ehci_reset(void) "=== RESET ==="
+usb_ehci_unrealize(void) "=== UNREALIZE ==="
+usb_ehci_opreg_read(uint32_t addr, const char *str, uint32_t val) "rd mmio %04x [%s] = %x"
+usb_ehci_opreg_write(uint32_t addr, const char *str, uint32_t val) "wr mmio %04x [%s] = %x"
+usb_ehci_opreg_change(uint32_t addr, const char *str, uint32_t new, uint32_t old) "ch mmio %04x [%s] = %x (old: %x)"
+usb_ehci_portsc_read(uint32_t addr, uint32_t port, uint32_t val) "rd mmio %04x [port %d] = %x"
+usb_ehci_portsc_write(uint32_t addr, uint32_t port, uint32_t val) "wr mmio %04x [port %d] = %x"
+usb_ehci_portsc_change(uint32_t addr, uint32_t port, uint32_t new, uint32_t old) "ch mmio %04x [port %d] = %x (old: %x)"
+usb_ehci_usbsts(const char *sts, int state) "usbsts %s %d"
+usb_ehci_state(const char *schedule, const char *state) "%s schedule %s"
+usb_ehci_qh_ptrs(void *q, uint32_t addr, uint32_t nxt, uint32_t c_qtd, uint32_t n_qtd, uint32_t a_qtd) "q %p - QH @ %08x: next %08x qtds %08x,%08x,%08x"
+usb_ehci_qh_fields(uint32_t addr, int rl, int mplen, int eps, int ep, int devaddr) "QH @ %08x - rl %d, mplen %d, eps %d, ep %d, dev %d"
+usb_ehci_qh_bits(uint32_t addr, int c, int h, int dtc, int i) "QH @ %08x - c %d, h %d, dtc %d, i %d"
+usb_ehci_qtd_ptrs(void *q, uint32_t addr, uint32_t nxt, uint32_t altnext) "q %p - QTD @ %08x: next %08x altnext %08x"
+usb_ehci_qtd_fields(uint32_t addr, int tbytes, int cpage, int cerr, int pid) "QTD @ %08x - tbytes %d, cpage %d, cerr %d, pid %d"
+usb_ehci_qtd_bits(uint32_t addr, int ioc, int active, int halt, int babble, int xacterr) "QTD @ %08x - ioc %d, active %d, halt %d, babble %d, xacterr %d"
+usb_ehci_itd(uint32_t addr, uint32_t nxt, uint32_t mplen, uint32_t mult, uint32_t ep, uint32_t devaddr) "ITD @ %08x: next %08x - mplen %d, mult %d, ep %d, dev %d"
+usb_ehci_sitd(uint32_t addr, uint32_t nxt, uint32_t active) "ITD @ %08x: next %08x - active %d"
+usb_ehci_port_attach(uint32_t port, const char *owner, const char *device) "attach port #%d, owner %s, device %s"
+usb_ehci_port_detach(uint32_t port, const char *owner) "detach port #%d, owner %s"
+usb_ehci_port_reset(uint32_t port, int enable) "reset port #%d - %d"
+usb_ehci_port_suspend(uint32_t port) "port #%d"
+usb_ehci_port_wakeup(uint32_t port) "port #%d"
+usb_ehci_port_resume(uint32_t port) "port #%d"
+usb_ehci_queue_action(void *q, const char *action) "q %p: %s"
+usb_ehci_packet_action(void *q, void *p, const char *action) "q %p p %p: %s"
+usb_ehci_irq(uint32_t level, uint32_t frindex, uint32_t sts, uint32_t mask) "level %d, frindex 0x%04x, sts 0x%x, mask 0x%x"
+usb_ehci_guest_bug(const char *reason) "%s"
+usb_ehci_doorbell_ring(void) ""
+usb_ehci_doorbell_ack(void) ""
+usb_ehci_dma_error(void) ""
+
+# hw/usb/hcd-uhci.c
+usb_uhci_reset(void) "=== RESET ==="
+usb_uhci_exit(void) "=== EXIT ==="
+usb_uhci_schedule_start(void) ""
+usb_uhci_schedule_stop(void) ""
+usb_uhci_frame_start(uint32_t num) "nr %d"
+usb_uhci_frame_stop_bandwidth(void) ""
+usb_uhci_frame_loop_stop_idle(void) ""
+usb_uhci_frame_loop_continue(void) ""
+usb_uhci_mmio_readw(uint32_t addr, uint32_t val) "addr 0x%04x, ret 0x%04x"
+usb_uhci_mmio_writew(uint32_t addr, uint32_t val) "addr 0x%04x, val 0x%04x"
+usb_uhci_queue_add(uint32_t token) "token 0x%x"
+usb_uhci_queue_del(uint32_t token, const char *reason) "token 0x%x: %s"
+usb_uhci_packet_add(uint32_t token, uint32_t addr) "token 0x%x, td 0x%x"
+usb_uhci_packet_link_async(uint32_t token, uint32_t addr) "token 0x%x, td 0x%x"
+usb_uhci_packet_unlink_async(uint32_t token, uint32_t addr) "token 0x%x, td 0x%x"
+usb_uhci_packet_cancel(uint32_t token, uint32_t addr, int done) "token 0x%x, td 0x%x, done %d"
+usb_uhci_packet_complete_success(uint32_t token, uint32_t addr) "token 0x%x, td 0x%x"
+usb_uhci_packet_complete_shortxfer(uint32_t token, uint32_t addr) "token 0x%x, td 0x%x"
+usb_uhci_packet_complete_stall(uint32_t token, uint32_t addr) "token 0x%x, td 0x%x"
+usb_uhci_packet_complete_babble(uint32_t token, uint32_t addr) "token 0x%x, td 0x%x"
+usb_uhci_packet_complete_error(uint32_t token, uint32_t addr) "token 0x%x, td 0x%x"
+usb_uhci_packet_del(uint32_t token, uint32_t addr) "token 0x%x, td 0x%x"
+usb_uhci_qh_load(uint32_t qh) "qh 0x%x"
+usb_uhci_td_load(uint32_t qh, uint32_t td, uint32_t ctrl, uint32_t token) "qh 0x%x, td 0x%x, ctrl 0x%x, token 0x%x"
+usb_uhci_td_queue(uint32_t td, uint32_t ctrl, uint32_t token) "td 0x%x, ctrl 0x%x, token 0x%x"
+usb_uhci_td_nextqh(uint32_t qh, uint32_t td) "qh 0x%x, td 0x%x"
+usb_uhci_td_async(uint32_t qh, uint32_t td) "qh 0x%x, td 0x%x"
+usb_uhci_td_complete(uint32_t qh, uint32_t td) "qh 0x%x, td 0x%x"
+
+# hw/usb/hcd-xhci.c
+usb_xhci_reset(void) "=== RESET ==="
+usb_xhci_exit(void) "=== EXIT ==="
+usb_xhci_run(void) ""
+usb_xhci_stop(void) ""
+usb_xhci_cap_read(uint32_t off, uint32_t val) "off 0x%04x, ret 0x%08x"
+usb_xhci_oper_read(uint32_t off, uint32_t val) "off 0x%04x, ret 0x%08x"
+usb_xhci_port_read(uint32_t port, uint32_t off, uint32_t val) "port %d, off 0x%04x, ret 0x%08x"
+usb_xhci_runtime_read(uint32_t off, uint32_t val) "off 0x%04x, ret 0x%08x"
+usb_xhci_doorbell_read(uint32_t off, uint32_t val) "off 0x%04x, ret 0x%08x"
+usb_xhci_oper_write(uint32_t off, uint32_t val) "off 0x%04x, val 0x%08x"
+usb_xhci_port_write(uint32_t port, uint32_t off, uint32_t val) "port %d, off 0x%04x, val 0x%08x"
+usb_xhci_runtime_write(uint32_t off, uint32_t val) "off 0x%04x, val 0x%08x"
+usb_xhci_doorbell_write(uint32_t off, uint32_t val) "off 0x%04x, val 0x%08x"
+usb_xhci_irq_intx(uint32_t level) "level %d"
+usb_xhci_irq_msi(uint32_t nr) "nr %d"
+usb_xhci_irq_msix(uint32_t nr) "nr %d"
+usb_xhci_irq_msix_use(uint32_t nr) "nr %d"
+usb_xhci_irq_msix_unuse(uint32_t nr) "nr %d"
+usb_xhci_queue_event(uint32_t vector, uint32_t idx, const char *trb, const char *evt, uint64_t param, uint32_t status, uint32_t control) "v %d, idx %d, %s, %s, p %016" PRIx64 ", s %08x, c 0x%08x"
+usb_xhci_fetch_trb(uint64_t addr, const char *name, uint64_t param, uint32_t status, uint32_t control) "addr %016" PRIx64 ", %s, p %016" PRIx64 ", s %08x, c 0x%08x"
+usb_xhci_port_reset(uint32_t port, bool warm) "port %d, warm %d"
+usb_xhci_port_link(uint32_t port, uint32_t pls) "port %d, pls %d"
+usb_xhci_port_notify(uint32_t port, uint32_t pls) "port %d, bits %x"
+usb_xhci_slot_enable(uint32_t slotid) "slotid %d"
+usb_xhci_slot_disable(uint32_t slotid) "slotid %d"
+usb_xhci_slot_address(uint32_t slotid, const char *port) "slotid %d, port %s"
+usb_xhci_slot_configure(uint32_t slotid) "slotid %d"
+usb_xhci_slot_evaluate(uint32_t slotid) "slotid %d"
+usb_xhci_slot_reset(uint32_t slotid) "slotid %d"
+usb_xhci_ep_enable(uint32_t slotid, uint32_t epid) "slotid %d, epid %d"
+usb_xhci_ep_disable(uint32_t slotid, uint32_t epid) "slotid %d, epid %d"
+usb_xhci_ep_set_dequeue(uint32_t slotid, uint32_t epid, uint32_t streamid, uint64_t param) "slotid %d, epid %d, streamid %d, ptr %016" PRIx64
+usb_xhci_ep_kick(uint32_t slotid, uint32_t epid, uint32_t streamid) "slotid %d, epid %d, streamid %d"
+usb_xhci_ep_stop(uint32_t slotid, uint32_t epid) "slotid %d, epid %d"
+usb_xhci_ep_reset(uint32_t slotid, uint32_t epid) "slotid %d, epid %d"
+usb_xhci_ep_state(uint32_t slotid, uint32_t epid, const char *os, const char *ns) "slotid %d, epid %d, %s -> %s"
+usb_xhci_xfer_start(void *xfer, uint32_t slotid, uint32_t epid, uint32_t streamid) "%p: slotid %d, epid %d, streamid %d"
+usb_xhci_xfer_async(void *xfer) "%p"
+usb_xhci_xfer_nak(void *xfer) "%p"
+usb_xhci_xfer_retry(void *xfer) "%p"
+usb_xhci_xfer_success(void *xfer, uint32_t bytes) "%p: len %d"
+usb_xhci_xfer_error(void *xfer, uint32_t ret) "%p: ret %d"
+usb_xhci_unimplemented(const char *item, int nr) "%s (0x%x)"
+
+# hw/usb/desc.c
+usb_desc_device(int addr, int len, int ret) "dev %d query device, len %d, ret %d"
+usb_desc_device_qualifier(int addr, int len, int ret) "dev %d query device qualifier, len %d, ret %d"
+usb_desc_config(int addr, int index, int len, int ret) "dev %d query config %d, len %d, ret %d"
+usb_desc_other_speed_config(int addr, int index, int len, int ret) "dev %d query config %d, len %d, ret %d"
+usb_desc_string(int addr, int index, int len, int ret) "dev %d query string %d, len %d, ret %d"
+usb_desc_bos(int addr, int len, int ret) "dev %d bos, len %d, ret %d"
+usb_desc_msos(int addr, int index, int len, int ret) "dev %d msos, index 0x%x, len %d, ret %d"
+usb_set_addr(int addr) "dev %d"
+usb_set_config(int addr, int config, int ret) "dev %d, config %d, ret %d"
+usb_set_interface(int addr, int iface, int alt, int ret) "dev %d, interface %d, altsetting %d, ret %d"
+usb_clear_device_feature(int addr, int feature, int ret) "dev %d, feature %d, ret %d"
+usb_set_device_feature(int addr, int feature, int ret) "dev %d, feature %d, ret %d"
+
+# hw/usb/dev-hub.c
+usb_hub_reset(int addr) "dev %d"
+usb_hub_control(int addr, int request, int value, int index, int length) "dev %d, req 0x%x, value %d, index %d, langth %d"
+usb_hub_get_port_status(int addr, int nr, int status, int changed) "dev %d, port %d, status 0x%x, changed 0x%x"
+usb_hub_set_port_feature(int addr, int nr, const char *f) "dev %d, port %d, feature %s"
+usb_hub_clear_port_feature(int addr, int nr, const char *f) "dev %d, port %d, feature %s"
+usb_hub_attach(int addr, int nr) "dev %d, port %d"
+usb_hub_detach(int addr, int nr) "dev %d, port %d"
+usb_hub_status_report(int addr, int status) "dev %d, status 0x%x"
+
+# hw/usb/dev-uas.c
+usb_uas_reset(int addr) "dev %d"
+usb_uas_command(int addr, uint16_t tag, int lun, uint32_t lun64_1, uint32_t lun64_2) "dev %d, tag 0x%x, lun %d, lun64 %08x-%08x"
+usb_uas_response(int addr, uint16_t tag, uint8_t code) "dev %d, tag 0x%x, code 0x%x"
+usb_uas_sense(int addr, uint16_t tag, uint8_t status) "dev %d, tag 0x%x, status 0x%x"
+usb_uas_read_ready(int addr, uint16_t tag) "dev %d, tag 0x%x"
+usb_uas_write_ready(int addr, uint16_t tag) "dev %d, tag 0x%x"
+usb_uas_xfer_data(int addr, uint16_t tag, uint32_t copy, uint32_t uoff, uint32_t usize, uint32_t soff, uint32_t ssize) "dev %d, tag 0x%x, copy %d, usb-pkt %d/%d, scsi-buf %d/%d"
+usb_uas_scsi_data(int addr, uint16_t tag, uint32_t bytes) "dev %d, tag 0x%x, bytes %d"
+usb_uas_scsi_complete(int addr, uint16_t tag, uint32_t status, uint32_t resid) "dev %d, tag 0x%x, status 0x%x, residue %d"
+usb_uas_tmf_abort_task(int addr, uint16_t tag, uint16_t task_tag) "dev %d, tag 0x%x, task-tag 0x%x"
+usb_uas_tmf_logical_unit_reset(int addr, uint16_t tag, int lun) "dev %d, tag 0x%x, lun %d"
+usb_uas_tmf_unsupported(int addr, uint16_t tag, uint32_t function) "dev %d, tag 0x%x, function 0x%x"
+
+# hw/usb/dev-mtp.c
+usb_mtp_reset(int addr) "dev %d"
+usb_mtp_command(int dev, uint16_t code, uint32_t trans, uint32_t arg0, uint32_t arg1, uint32_t arg2, uint32_t arg3, uint32_t arg4) "dev %d, code 0x%x, trans 0x%x, args 0x%x, 0x%x, 0x%x, 0x%x, 0x%x"
+usb_mtp_success(int dev, uint32_t trans, uint32_t arg0, uint32_t arg1) "dev %d, trans 0x%x, args 0x%x, 0x%x"
+usb_mtp_error(int dev, uint16_t code, uint32_t trans, uint32_t arg0, uint32_t arg1) "dev %d, code 0x%x, trans 0x%x, args 0x%x, 0x%x"
+usb_mtp_data_in(int dev, uint32_t trans, uint32_t len) "dev %d, trans 0x%x, len %d"
+usb_mtp_xfer(int dev, uint32_t ep, uint32_t dlen, uint32_t plen) "dev %d, ep %d, %d/%d"
+usb_mtp_nak(int dev, uint32_t ep) "dev %d, ep %d"
+usb_mtp_stall(int dev, const char *reason) "dev %d, reason: %s"
+usb_mtp_op_get_device_info(int dev) "dev %d"
+usb_mtp_op_open_session(int dev) "dev %d"
+usb_mtp_op_close_session(int dev) "dev %d"
+usb_mtp_op_get_storage_ids(int dev) "dev %d"
+usb_mtp_op_get_storage_info(int dev) "dev %d"
+usb_mtp_op_get_num_objects(int dev, uint32_t handle, const char *path) "dev %d, handle 0x%x, path %s"
+usb_mtp_op_get_object_handles(int dev, uint32_t handle, const char *path) "dev %d, handle 0x%x, path %s"
+usb_mtp_op_get_object_info(int dev, uint32_t handle, const char *path) "dev %d, handle 0x%x, path %s"
+usb_mtp_op_get_object(int dev, uint32_t handle, const char *path) "dev %d, handle 0x%x, path %s"
+usb_mtp_op_get_partial_object(int dev, uint32_t handle, const char *path, uint32_t offset, uint32_t length) "dev %d, handle 0x%x, path %s, off %d, len %d"
+usb_mtp_op_unknown(int dev, uint32_t code) "dev %d, command code 0x%x"
+usb_mtp_object_alloc(int dev, uint32_t handle, const char *path) "dev %d, handle 0x%x, path %s"
+usb_mtp_object_free(int dev, uint32_t handle, const char *path) "dev %d, handle 0x%x, path %s"
+usb_mtp_add_child(int dev, uint32_t handle, const char *path) "dev %d, handle 0x%x, path %s"
+usb_mtp_inotify_event(int dev, const char *path, uint32_t mask, const char *s) "dev %d, path %s mask 0x%x event %s"
+
+# hw/usb/host-libusb.c
+usb_host_open_started(int bus, int addr) "dev %d:%d"
+usb_host_open_success(int bus, int addr) "dev %d:%d"
+usb_host_open_failure(int bus, int addr) "dev %d:%d"
+usb_host_close(int bus, int addr) "dev %d:%d"
+usb_host_attach_kernel(int bus, int addr, int interface) "dev %d:%d, if %d"
+usb_host_detach_kernel(int bus, int addr, int interface) "dev %d:%d, if %d"
+usb_host_set_address(int bus, int addr, int config) "dev %d:%d, address %d"
+usb_host_set_config(int bus, int addr, int config) "dev %d:%d, config %d"
+usb_host_set_interface(int bus, int addr, int interface, int alt) "dev %d:%d, interface %d, alt %d"
+usb_host_claim_interface(int bus, int addr, int config, int interface) "dev %d:%d, config %d, if %d"
+usb_host_release_interface(int bus, int addr, int interface) "dev %d:%d, if %d"
+usb_host_req_control(int bus, int addr, void *p, int req, int value, int index) "dev %d:%d, packet %p, req 0x%x, value %d, index %d"
+usb_host_req_data(int bus, int addr, void *p, int in, int ep, int size) "dev %d:%d, packet %p, in %d, ep %d, size %d"
+usb_host_req_complete(int bus, int addr, void *p, int status, int length) "dev %d:%d, packet %p, status %d, length %d"
+usb_host_req_emulated(int bus, int addr, void *p, int status) "dev %d:%d, packet %p, status %d"
+usb_host_req_canceled(int bus, int addr, void *p) "dev %d:%d, packet %p"
+usb_host_iso_start(int bus, int addr, int ep) "dev %d:%d, ep %d"
+usb_host_iso_stop(int bus, int addr, int ep) "dev %d:%d, ep %d"
+usb_host_iso_out_of_bufs(int bus, int addr, int ep) "dev %d:%d, ep %d"
+usb_host_reset(int bus, int addr) "dev %d:%d"
+usb_host_auto_scan_enabled(void)
+usb_host_auto_scan_disabled(void)
+usb_host_parse_config(int bus, int addr, int value, int active) "dev %d:%d, value %d, active %d"
+usb_host_parse_interface(int bus, int addr, int num, int alt, int active) "dev %d:%d, num %d, alt %d, active %d"
+usb_host_parse_endpoint(int bus, int addr, int ep, const char *dir, const char *type, int active) "dev %d:%d, ep %d, %s, %s, active %d"
+usb_host_parse_error(int bus, int addr, const char *errmsg) "dev %d:%d, msg %s"
diff --git a/trace-events b/trace-events
index 605bd40..ca2a894 100644
--- a/trace-events
+++ b/trace-events
@@ -125,273 +125,6 @@ sun4m_iommu_page_get_flags(uint64_t pa, uint64_t iopte, uint32_t ret) "get flags
 sun4m_iommu_translate_pa(uint64_t addr, uint64_t pa, uint32_t iopte) "xlate dva %"PRIx64" => pa %"PRIx64" iopte = %x"
 sun4m_iommu_bad_addr(uint64_t addr) "bad addr %"PRIx64
 
-# hw/usb/core.c
-usb_packet_state_change(int bus, const char *port, int ep, void *p, const char *o, const char *n) "bus %d, port %s, ep %d, packet %p, state %s -> %s"
-usb_packet_state_fault(int bus, const char *port, int ep, void *p, const char *o, const char *n) "bus %d, port %s, ep %d, packet %p, state %s, expected %s"
-
-# hw/usb/bus.c
-usb_port_claim(int bus, const char *port) "bus %d, port %s"
-usb_port_attach(int bus, const char *port, const char *devspeed, const char *portspeed) "bus %d, port %s, devspeed %s, portspeed %s"
-usb_port_detach(int bus, const char *port) "bus %d, port %s"
-usb_port_release(int bus, const char *port) "bus %d, port %s"
-
-# hw/usb/hcd-ohci.c
-usb_ohci_iso_td_read_failed(uint32_t addr) "ISO_TD read error at %x"
-usb_ohci_iso_td_head(uint32_t head, uint32_t tail, uint32_t flags, uint32_t bp, uint32_t next, uint32_t be, uint32_t framenum, uint32_t startframe, uint32_t framecount, int rel_frame_num) "ISO_TD ED head 0x%.8x tailp 0x%.8x\n0x%.8x 0x%.8x 0x%.8x 0x%.8x\nframe_number 0x%.8x starting_frame 0x%.8x\nframe_count  0x%.8x relative %d"
-usb_ohci_iso_td_head_offset(uint32_t o0, uint32_t o1, uint32_t o2, uint32_t o3, uint32_t o4, uint32_t o5, uint32_t o6, uint32_t o7) "0x%.8x 0x%.8x 0x%.8x 0x%.8x 0x%.8x 0x%.8x 0x%.8x 0x%.8x"
-usb_ohci_iso_td_relative_frame_number_neg(int rel) "ISO_TD R=%d < 0"
-usb_ohci_iso_td_relative_frame_number_big(int rel, int count) "ISO_TD R=%d > FC=%d"
-usb_ohci_iso_td_bad_direction(int dir) "Bad direction %d"
-usb_ohci_iso_td_bad_bp_be(uint32_t bp, uint32_t be) "ISO_TD bp 0x%.8x be 0x%.8x"
-usb_ohci_iso_td_bad_cc_not_accessed(uint32_t start, uint32_t next) "ISO_TD cc != not accessed 0x%.8x 0x%.8x"
-usb_ohci_iso_td_bad_cc_overrun(uint32_t start, uint32_t next) "ISO_TD start_offset=0x%.8x > next_offset=0x%.8x"
-usb_ohci_iso_td_so(uint32_t so, uint32_t eo, uint32_t s, uint32_t e, const char *str, ssize_t len, int ret) "0x%.8x eo 0x%.8x\nsa 0x%.8x ea 0x%.8x\ndir %s len %zu ret %d"
-usb_ohci_iso_td_data_overrun(int ret, ssize_t len) "DataOverrun %d > %zu"
-usb_ohci_iso_td_data_underrun(int ret) "DataUnderrun %d"
-usb_ohci_iso_td_nak(int ret) "got NAK/STALL %d"
-usb_ohci_iso_td_bad_response(int ret) "Bad device response %d"
-usb_ohci_port_attach(int index) "port #%d"
-usb_ohci_port_detach(int index) "port #%d"
-usb_ohci_port_wakeup(int index) "port #%d"
-usb_ohci_port_suspend(int index) "port #%d"
-usb_ohci_port_reset(int index) "port #%d"
-usb_ohci_remote_wakeup(const char *s) "%s: SUSPEND->RESUME"
-usb_ohci_reset(const char *s) "%s"
-usb_ohci_start(const char *s) "%s: USB Operational"
-usb_ohci_resume(const char *s) "%s: USB Resume"
-usb_ohci_stop(const char *s) "%s: USB Suspended"
-usb_ohci_exit(const char *s) "%s"
-usb_ohci_set_ctl(const char *s, uint32_t new_state) "%s: new state 0x%x"
-usb_ohci_td_underrun(void) ""
-usb_ohci_td_dev_error(void) ""
-usb_ohci_td_nak(void) ""
-usb_ohci_td_stall(void) ""
-usb_ohci_td_babble(void) ""
-usb_ohci_td_bad_device_response(int rc) "%d"
-usb_ohci_td_read_error(uint32_t addr) "TD read error at %x"
-usb_ohci_td_bad_direction(int dir) "Bad direction %d"
-usb_ohci_td_skip_async(void) ""
-usb_ohci_td_pkt_hdr(uint32_t addr, int64_t pktlen, int64_t len, const char *s, int flag_r, uint32_t cbp, uint32_t be) " TD @ 0x%.8x %" PRId64 " of %" PRId64 " bytes %s r=%d cbp=0x%.8x be=0x%.8x"
-usb_ohci_td_pkt_short(const char *dir, const char *buf) "%s data: %s"
-usb_ohci_td_pkt_full(const char *dir, const char *buf) "%s data: %s"
-usb_ohci_td_too_many_pending(void) ""
-usb_ohci_td_packet_status(int status) "status=%d"
-usb_ohci_ed_read_error(uint32_t addr) "ED read error at %x"
-usb_ohci_ed_pkt(uint32_t cur, int h, int c, uint32_t head, uint32_t tail, uint32_t next) "ED @ 0x%.8x h=%u c=%u\n  head=0x%.8x tailp=0x%.8x next=0x%.8x"
-usb_ohci_ed_pkt_flags(uint32_t fa, uint32_t en, uint32_t d, int s, int k, int f, uint32_t mps) "fa=%u en=%u d=%u s=%u k=%u f=%u mps=%u"
-usb_ohci_hcca_read_error(uint32_t addr) "HCCA read error at %x"
-usb_ohci_mem_read_unaligned(uint32_t addr) "at %x"
-usb_ohci_mem_read_bad_offset(uint32_t addr) "%x"
-usb_ohci_mem_write_unaligned(uint32_t addr) "at %x"
-usb_ohci_mem_write_bad_offset(uint32_t addr) "%x"
-usb_ohci_process_lists(uint32_t head, uint32_t cur) "head %x, cur %x"
-usb_ohci_bus_eof_timer_failed(const char *name) "%s: timer_new_ns failed"
-usb_ohci_set_frame_interval(const char *name, uint16_t fi_x, uint16_t fi_u) "%s: FrameInterval = 0x%x (%u)"
-usb_ohci_hub_power_up(void) "powered up all ports"
-usb_ohci_hub_power_down(void) "powered down all ports"
-usb_ohci_init_time(int64_t frametime, int64_t bittime) "usb_bit_time=%" PRId64 " usb_frame_time=%" PRId64
-usb_ohci_die(void) ""
-usb_ohci_async_complete(void) ""
-
-# hw/usb/hcd-ehci.c
-usb_ehci_reset(void) "=== RESET ==="
-usb_ehci_unrealize(void) "=== UNREALIZE ==="
-usb_ehci_opreg_read(uint32_t addr, const char *str, uint32_t val) "rd mmio %04x [%s] = %x"
-usb_ehci_opreg_write(uint32_t addr, const char *str, uint32_t val) "wr mmio %04x [%s] = %x"
-usb_ehci_opreg_change(uint32_t addr, const char *str, uint32_t new, uint32_t old) "ch mmio %04x [%s] = %x (old: %x)"
-usb_ehci_portsc_read(uint32_t addr, uint32_t port, uint32_t val) "rd mmio %04x [port %d] = %x"
-usb_ehci_portsc_write(uint32_t addr, uint32_t port, uint32_t val) "wr mmio %04x [port %d] = %x"
-usb_ehci_portsc_change(uint32_t addr, uint32_t port, uint32_t new, uint32_t old) "ch mmio %04x [port %d] = %x (old: %x)"
-usb_ehci_usbsts(const char *sts, int state) "usbsts %s %d"
-usb_ehci_state(const char *schedule, const char *state) "%s schedule %s"
-usb_ehci_qh_ptrs(void *q, uint32_t addr, uint32_t nxt, uint32_t c_qtd, uint32_t n_qtd, uint32_t a_qtd) "q %p - QH @ %08x: next %08x qtds %08x,%08x,%08x"
-usb_ehci_qh_fields(uint32_t addr, int rl, int mplen, int eps, int ep, int devaddr) "QH @ %08x - rl %d, mplen %d, eps %d, ep %d, dev %d"
-usb_ehci_qh_bits(uint32_t addr, int c, int h, int dtc, int i) "QH @ %08x - c %d, h %d, dtc %d, i %d"
-usb_ehci_qtd_ptrs(void *q, uint32_t addr, uint32_t nxt, uint32_t altnext) "q %p - QTD @ %08x: next %08x altnext %08x"
-usb_ehci_qtd_fields(uint32_t addr, int tbytes, int cpage, int cerr, int pid) "QTD @ %08x - tbytes %d, cpage %d, cerr %d, pid %d"
-usb_ehci_qtd_bits(uint32_t addr, int ioc, int active, int halt, int babble, int xacterr) "QTD @ %08x - ioc %d, active %d, halt %d, babble %d, xacterr %d"
-usb_ehci_itd(uint32_t addr, uint32_t nxt, uint32_t mplen, uint32_t mult, uint32_t ep, uint32_t devaddr) "ITD @ %08x: next %08x - mplen %d, mult %d, ep %d, dev %d"
-usb_ehci_sitd(uint32_t addr, uint32_t nxt, uint32_t active) "ITD @ %08x: next %08x - active %d"
-usb_ehci_port_attach(uint32_t port, const char *owner, const char *device) "attach port #%d, owner %s, device %s"
-usb_ehci_port_detach(uint32_t port, const char *owner) "detach port #%d, owner %s"
-usb_ehci_port_reset(uint32_t port, int enable) "reset port #%d - %d"
-usb_ehci_port_suspend(uint32_t port) "port #%d"
-usb_ehci_port_wakeup(uint32_t port) "port #%d"
-usb_ehci_port_resume(uint32_t port) "port #%d"
-usb_ehci_queue_action(void *q, const char *action) "q %p: %s"
-usb_ehci_packet_action(void *q, void *p, const char *action) "q %p p %p: %s"
-usb_ehci_irq(uint32_t level, uint32_t frindex, uint32_t sts, uint32_t mask) "level %d, frindex 0x%04x, sts 0x%x, mask 0x%x"
-usb_ehci_guest_bug(const char *reason) "%s"
-usb_ehci_doorbell_ring(void) ""
-usb_ehci_doorbell_ack(void) ""
-usb_ehci_dma_error(void) ""
-
-# hw/usb/hcd-uhci.c
-usb_uhci_reset(void) "=== RESET ==="
-usb_uhci_exit(void) "=== EXIT ==="
-usb_uhci_schedule_start(void) ""
-usb_uhci_schedule_stop(void) ""
-usb_uhci_frame_start(uint32_t num) "nr %d"
-usb_uhci_frame_stop_bandwidth(void) ""
-usb_uhci_frame_loop_stop_idle(void) ""
-usb_uhci_frame_loop_continue(void) ""
-usb_uhci_mmio_readw(uint32_t addr, uint32_t val) "addr 0x%04x, ret 0x%04x"
-usb_uhci_mmio_writew(uint32_t addr, uint32_t val) "addr 0x%04x, val 0x%04x"
-usb_uhci_queue_add(uint32_t token) "token 0x%x"
-usb_uhci_queue_del(uint32_t token, const char *reason) "token 0x%x: %s"
-usb_uhci_packet_add(uint32_t token, uint32_t addr) "token 0x%x, td 0x%x"
-usb_uhci_packet_link_async(uint32_t token, uint32_t addr) "token 0x%x, td 0x%x"
-usb_uhci_packet_unlink_async(uint32_t token, uint32_t addr) "token 0x%x, td 0x%x"
-usb_uhci_packet_cancel(uint32_t token, uint32_t addr, int done) "token 0x%x, td 0x%x, done %d"
-usb_uhci_packet_complete_success(uint32_t token, uint32_t addr) "token 0x%x, td 0x%x"
-usb_uhci_packet_complete_shortxfer(uint32_t token, uint32_t addr) "token 0x%x, td 0x%x"
-usb_uhci_packet_complete_stall(uint32_t token, uint32_t addr) "token 0x%x, td 0x%x"
-usb_uhci_packet_complete_babble(uint32_t token, uint32_t addr) "token 0x%x, td 0x%x"
-usb_uhci_packet_complete_error(uint32_t token, uint32_t addr) "token 0x%x, td 0x%x"
-usb_uhci_packet_del(uint32_t token, uint32_t addr) "token 0x%x, td 0x%x"
-usb_uhci_qh_load(uint32_t qh) "qh 0x%x"
-usb_uhci_td_load(uint32_t qh, uint32_t td, uint32_t ctrl, uint32_t token) "qh 0x%x, td 0x%x, ctrl 0x%x, token 0x%x"
-usb_uhci_td_queue(uint32_t td, uint32_t ctrl, uint32_t token) "td 0x%x, ctrl 0x%x, token 0x%x"
-usb_uhci_td_nextqh(uint32_t qh, uint32_t td) "qh 0x%x, td 0x%x"
-usb_uhci_td_async(uint32_t qh, uint32_t td) "qh 0x%x, td 0x%x"
-usb_uhci_td_complete(uint32_t qh, uint32_t td) "qh 0x%x, td 0x%x"
-
-# hw/usb/hcd-xhci.c
-usb_xhci_reset(void) "=== RESET ==="
-usb_xhci_exit(void) "=== EXIT ==="
-usb_xhci_run(void) ""
-usb_xhci_stop(void) ""
-usb_xhci_cap_read(uint32_t off, uint32_t val) "off 0x%04x, ret 0x%08x"
-usb_xhci_oper_read(uint32_t off, uint32_t val) "off 0x%04x, ret 0x%08x"
-usb_xhci_port_read(uint32_t port, uint32_t off, uint32_t val) "port %d, off 0x%04x, ret 0x%08x"
-usb_xhci_runtime_read(uint32_t off, uint32_t val) "off 0x%04x, ret 0x%08x"
-usb_xhci_doorbell_read(uint32_t off, uint32_t val) "off 0x%04x, ret 0x%08x"
-usb_xhci_oper_write(uint32_t off, uint32_t val) "off 0x%04x, val 0x%08x"
-usb_xhci_port_write(uint32_t port, uint32_t off, uint32_t val) "port %d, off 0x%04x, val 0x%08x"
-usb_xhci_runtime_write(uint32_t off, uint32_t val) "off 0x%04x, val 0x%08x"
-usb_xhci_doorbell_write(uint32_t off, uint32_t val) "off 0x%04x, val 0x%08x"
-usb_xhci_irq_intx(uint32_t level) "level %d"
-usb_xhci_irq_msi(uint32_t nr) "nr %d"
-usb_xhci_irq_msix(uint32_t nr) "nr %d"
-usb_xhci_irq_msix_use(uint32_t nr) "nr %d"
-usb_xhci_irq_msix_unuse(uint32_t nr) "nr %d"
-usb_xhci_queue_event(uint32_t vector, uint32_t idx, const char *trb, const char *evt, uint64_t param, uint32_t status, uint32_t control) "v %d, idx %d, %s, %s, p %016" PRIx64 ", s %08x, c 0x%08x"
-usb_xhci_fetch_trb(uint64_t addr, const char *name, uint64_t param, uint32_t status, uint32_t control) "addr %016" PRIx64 ", %s, p %016" PRIx64 ", s %08x, c 0x%08x"
-usb_xhci_port_reset(uint32_t port, bool warm) "port %d, warm %d"
-usb_xhci_port_link(uint32_t port, uint32_t pls) "port %d, pls %d"
-usb_xhci_port_notify(uint32_t port, uint32_t pls) "port %d, bits %x"
-usb_xhci_slot_enable(uint32_t slotid) "slotid %d"
-usb_xhci_slot_disable(uint32_t slotid) "slotid %d"
-usb_xhci_slot_address(uint32_t slotid, const char *port) "slotid %d, port %s"
-usb_xhci_slot_configure(uint32_t slotid) "slotid %d"
-usb_xhci_slot_evaluate(uint32_t slotid) "slotid %d"
-usb_xhci_slot_reset(uint32_t slotid) "slotid %d"
-usb_xhci_ep_enable(uint32_t slotid, uint32_t epid) "slotid %d, epid %d"
-usb_xhci_ep_disable(uint32_t slotid, uint32_t epid) "slotid %d, epid %d"
-usb_xhci_ep_set_dequeue(uint32_t slotid, uint32_t epid, uint32_t streamid, uint64_t param) "slotid %d, epid %d, streamid %d, ptr %016" PRIx64
-usb_xhci_ep_kick(uint32_t slotid, uint32_t epid, uint32_t streamid) "slotid %d, epid %d, streamid %d"
-usb_xhci_ep_stop(uint32_t slotid, uint32_t epid) "slotid %d, epid %d"
-usb_xhci_ep_reset(uint32_t slotid, uint32_t epid) "slotid %d, epid %d"
-usb_xhci_ep_state(uint32_t slotid, uint32_t epid, const char *os, const char *ns) "slotid %d, epid %d, %s -> %s"
-usb_xhci_xfer_start(void *xfer, uint32_t slotid, uint32_t epid, uint32_t streamid) "%p: slotid %d, epid %d, streamid %d"
-usb_xhci_xfer_async(void *xfer) "%p"
-usb_xhci_xfer_nak(void *xfer) "%p"
-usb_xhci_xfer_retry(void *xfer) "%p"
-usb_xhci_xfer_success(void *xfer, uint32_t bytes) "%p: len %d"
-usb_xhci_xfer_error(void *xfer, uint32_t ret) "%p: ret %d"
-usb_xhci_unimplemented(const char *item, int nr) "%s (0x%x)"
-
-# hw/usb/desc.c
-usb_desc_device(int addr, int len, int ret) "dev %d query device, len %d, ret %d"
-usb_desc_device_qualifier(int addr, int len, int ret) "dev %d query device qualifier, len %d, ret %d"
-usb_desc_config(int addr, int index, int len, int ret) "dev %d query config %d, len %d, ret %d"
-usb_desc_other_speed_config(int addr, int index, int len, int ret) "dev %d query config %d, len %d, ret %d"
-usb_desc_string(int addr, int index, int len, int ret) "dev %d query string %d, len %d, ret %d"
-usb_desc_bos(int addr, int len, int ret) "dev %d bos, len %d, ret %d"
-usb_desc_msos(int addr, int index, int len, int ret) "dev %d msos, index 0x%x, len %d, ret %d"
-usb_set_addr(int addr) "dev %d"
-usb_set_config(int addr, int config, int ret) "dev %d, config %d, ret %d"
-usb_set_interface(int addr, int iface, int alt, int ret) "dev %d, interface %d, altsetting %d, ret %d"
-usb_clear_device_feature(int addr, int feature, int ret) "dev %d, feature %d, ret %d"
-usb_set_device_feature(int addr, int feature, int ret) "dev %d, feature %d, ret %d"
-
-# hw/usb/dev-hub.c
-usb_hub_reset(int addr) "dev %d"
-usb_hub_control(int addr, int request, int value, int index, int length) "dev %d, req 0x%x, value %d, index %d, langth %d"
-usb_hub_get_port_status(int addr, int nr, int status, int changed) "dev %d, port %d, status 0x%x, changed 0x%x"
-usb_hub_set_port_feature(int addr, int nr, const char *f) "dev %d, port %d, feature %s"
-usb_hub_clear_port_feature(int addr, int nr, const char *f) "dev %d, port %d, feature %s"
-usb_hub_attach(int addr, int nr) "dev %d, port %d"
-usb_hub_detach(int addr, int nr) "dev %d, port %d"
-usb_hub_status_report(int addr, int status) "dev %d, status 0x%x"
-
-# hw/usb/dev-uas.c
-usb_uas_reset(int addr) "dev %d"
-usb_uas_command(int addr, uint16_t tag, int lun, uint32_t lun64_1, uint32_t lun64_2) "dev %d, tag 0x%x, lun %d, lun64 %08x-%08x"
-usb_uas_response(int addr, uint16_t tag, uint8_t code) "dev %d, tag 0x%x, code 0x%x"
-usb_uas_sense(int addr, uint16_t tag, uint8_t status) "dev %d, tag 0x%x, status 0x%x"
-usb_uas_read_ready(int addr, uint16_t tag) "dev %d, tag 0x%x"
-usb_uas_write_ready(int addr, uint16_t tag) "dev %d, tag 0x%x"
-usb_uas_xfer_data(int addr, uint16_t tag, uint32_t copy, uint32_t uoff, uint32_t usize, uint32_t soff, uint32_t ssize) "dev %d, tag 0x%x, copy %d, usb-pkt %d/%d, scsi-buf %d/%d"
-usb_uas_scsi_data(int addr, uint16_t tag, uint32_t bytes) "dev %d, tag 0x%x, bytes %d"
-usb_uas_scsi_complete(int addr, uint16_t tag, uint32_t status, uint32_t resid) "dev %d, tag 0x%x, status 0x%x, residue %d"
-usb_uas_tmf_abort_task(int addr, uint16_t tag, uint16_t task_tag) "dev %d, tag 0x%x, task-tag 0x%x"
-usb_uas_tmf_logical_unit_reset(int addr, uint16_t tag, int lun) "dev %d, tag 0x%x, lun %d"
-usb_uas_tmf_unsupported(int addr, uint16_t tag, uint32_t function) "dev %d, tag 0x%x, function 0x%x"
-
-# hw/usb/dev-mtp.c
-usb_mtp_reset(int addr) "dev %d"
-usb_mtp_command(int dev, uint16_t code, uint32_t trans, uint32_t arg0, uint32_t arg1, uint32_t arg2, uint32_t arg3, uint32_t arg4) "dev %d, code 0x%x, trans 0x%x, args 0x%x, 0x%x, 0x%x, 0x%x, 0x%x"
-usb_mtp_success(int dev, uint32_t trans, uint32_t arg0, uint32_t arg1) "dev %d, trans 0x%x, args 0x%x, 0x%x"
-usb_mtp_error(int dev, uint16_t code, uint32_t trans, uint32_t arg0, uint32_t arg1) "dev %d, code 0x%x, trans 0x%x, args 0x%x, 0x%x"
-usb_mtp_data_in(int dev, uint32_t trans, uint32_t len) "dev %d, trans 0x%x, len %d"
-usb_mtp_xfer(int dev, uint32_t ep, uint32_t dlen, uint32_t plen) "dev %d, ep %d, %d/%d"
-usb_mtp_nak(int dev, uint32_t ep) "dev %d, ep %d"
-usb_mtp_stall(int dev, const char *reason) "dev %d, reason: %s"
-usb_mtp_op_get_device_info(int dev) "dev %d"
-usb_mtp_op_open_session(int dev) "dev %d"
-usb_mtp_op_close_session(int dev) "dev %d"
-usb_mtp_op_get_storage_ids(int dev) "dev %d"
-usb_mtp_op_get_storage_info(int dev) "dev %d"
-usb_mtp_op_get_num_objects(int dev, uint32_t handle, const char *path) "dev %d, handle 0x%x, path %s"
-usb_mtp_op_get_object_handles(int dev, uint32_t handle, const char *path) "dev %d, handle 0x%x, path %s"
-usb_mtp_op_get_object_info(int dev, uint32_t handle, const char *path) "dev %d, handle 0x%x, path %s"
-usb_mtp_op_get_object(int dev, uint32_t handle, const char *path) "dev %d, handle 0x%x, path %s"
-usb_mtp_op_get_partial_object(int dev, uint32_t handle, const char *path, uint32_t offset, uint32_t length) "dev %d, handle 0x%x, path %s, off %d, len %d"
-usb_mtp_op_unknown(int dev, uint32_t code) "dev %d, command code 0x%x"
-usb_mtp_object_alloc(int dev, uint32_t handle, const char *path) "dev %d, handle 0x%x, path %s"
-usb_mtp_object_free(int dev, uint32_t handle, const char *path) "dev %d, handle 0x%x, path %s"
-usb_mtp_add_child(int dev, uint32_t handle, const char *path) "dev %d, handle 0x%x, path %s"
-usb_mtp_inotify_event(int dev, const char *path, uint32_t mask, const char *s) "dev %d, path %s mask 0x%x event %s"
-
-# hw/usb/host-libusb.c
-usb_host_open_started(int bus, int addr) "dev %d:%d"
-usb_host_open_success(int bus, int addr) "dev %d:%d"
-usb_host_open_failure(int bus, int addr) "dev %d:%d"
-usb_host_close(int bus, int addr) "dev %d:%d"
-usb_host_attach_kernel(int bus, int addr, int interface) "dev %d:%d, if %d"
-usb_host_detach_kernel(int bus, int addr, int interface) "dev %d:%d, if %d"
-usb_host_set_address(int bus, int addr, int config) "dev %d:%d, address %d"
-usb_host_set_config(int bus, int addr, int config) "dev %d:%d, config %d"
-usb_host_set_interface(int bus, int addr, int interface, int alt) "dev %d:%d, interface %d, alt %d"
-usb_host_claim_interface(int bus, int addr, int config, int interface) "dev %d:%d, config %d, if %d"
-usb_host_release_interface(int bus, int addr, int interface) "dev %d:%d, if %d"
-usb_host_req_control(int bus, int addr, void *p, int req, int value, int index) "dev %d:%d, packet %p, req 0x%x, value %d, index %d"
-usb_host_req_data(int bus, int addr, void *p, int in, int ep, int size) "dev %d:%d, packet %p, in %d, ep %d, size %d"
-usb_host_req_complete(int bus, int addr, void *p, int status, int length) "dev %d:%d, packet %p, status %d, length %d"
-usb_host_req_emulated(int bus, int addr, void *p, int status) "dev %d:%d, packet %p, status %d"
-usb_host_req_canceled(int bus, int addr, void *p) "dev %d:%d, packet %p"
-usb_host_iso_start(int bus, int addr, int ep) "dev %d:%d, ep %d"
-usb_host_iso_stop(int bus, int addr, int ep) "dev %d:%d, ep %d"
-usb_host_iso_out_of_bufs(int bus, int addr, int ep) "dev %d:%d, ep %d"
-usb_host_reset(int bus, int addr) "dev %d:%d"
-usb_host_auto_scan_enabled(void)
-usb_host_auto_scan_disabled(void)
-usb_host_parse_config(int bus, int addr, int value, int active) "dev %d:%d, value %d, active %d"
-usb_host_parse_interface(int bus, int addr, int num, int alt, int active) "dev %d:%d, num %d, alt %d, active %d"
-usb_host_parse_endpoint(int bus, int addr, int ep, const char *dir, const char *type, int active) "dev %d:%d, ep %d, %s, %s, active %d"
-usb_host_parse_error(int bus, int addr, const char *errmsg) "dev %d:%d, msg %s"
-
 # hw/scsi/scsi-bus.c
 scsi_req_alloc(int target, int lun, int tag) "target %d lun %d tag %d"
 scsi_req_cancel(int target, int lun, int tag) "target %d lun %d tag %d"
-- 
2.5.5

  parent reply	other threads:[~2016-06-16  8:41 UTC|newest]

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-06-16  8:39 [Qemu-devel] [PATCH v2 00/40] Split up the trace-events file Daniel P. Berrange
2016-06-16  8:39 ` [Qemu-devel] [PATCH v2 01/40] trace: add build framework for merging trace-events files Daniel P. Berrange
2016-06-16  8:39 ` [Qemu-devel] [PATCH v2 02/40] trace: split out trace events for util/ directory Daniel P. Berrange
2016-06-16  8:39 ` [Qemu-devel] [PATCH v2 03/40] trace: split out trace events for crypto/ directory Daniel P. Berrange
2016-06-16  8:39 ` [Qemu-devel] [PATCH v2 04/40] trace: split out trace events for io/ directory Daniel P. Berrange
2016-06-16  8:39 ` [Qemu-devel] [PATCH v2 05/40] trace: split out trace events for migration/ directory Daniel P. Berrange
2016-06-16  8:39 ` [Qemu-devel] [PATCH v2 06/40] trace: split out trace events for block/ directory Daniel P. Berrange
2016-06-16  8:39 ` [Qemu-devel] [PATCH v2 07/40] trace: split out trace events for hw/block/ directory Daniel P. Berrange
2016-06-16  8:39 ` [Qemu-devel] [PATCH v2 08/40] trace: split out trace events for hw/char/ directory Daniel P. Berrange
2016-06-16  8:39 ` [Qemu-devel] [PATCH v2 09/40] trace: split out trace events for hw/intc/ directory Daniel P. Berrange
2016-06-16  8:39 ` [Qemu-devel] [PATCH v2 10/40] trace: split out trace events for hw/net/ directory Daniel P. Berrange
2016-06-16  8:39 ` [Qemu-devel] [PATCH v2 11/40] trace: split out trace events for hw/virtio/ directory Daniel P. Berrange
2016-06-16  8:39 ` [Qemu-devel] [PATCH v2 12/40] trace: split out trace events for hw/audio/ directory Daniel P. Berrange
2016-06-16  8:39 ` [Qemu-devel] [PATCH v2 13/40] trace: split out trace events for hw/misc/ directory Daniel P. Berrange
2016-06-16  8:40 ` Daniel P. Berrange [this message]
2016-06-16  8:40 ` [Qemu-devel] [PATCH v2 15/40] trace: split out trace events for hw/scsi/ directory Daniel P. Berrange
2016-06-16  8:40 ` [Qemu-devel] [PATCH v2 16/40] trace: split out trace events for hw/nvram/ directory Daniel P. Berrange
2016-06-16  8:40 ` [Qemu-devel] [PATCH v2 17/40] trace: split out trace events for hw/display/ directory Daniel P. Berrange
2016-06-16  8:40 ` [Qemu-devel] [PATCH v2 18/40] trace: split out trace events for hw/input/ directory Daniel P. Berrange
2016-06-16  8:40 ` [Qemu-devel] [PATCH v2 19/40] trace: split out trace events for hw/timer/ directory Daniel P. Berrange
2016-06-16  8:40 ` [Qemu-devel] [PATCH v2 20/40] trace: split out trace events for hw/dma/ directory Daniel P. Berrange
2016-06-16  8:40 ` [Qemu-devel] [PATCH v2 21/40] trace: split out trace events for hw/sparc/ directory Daniel P. Berrange
2016-06-16  8:40 ` [Qemu-devel] [PATCH v2 22/40] trace: split out trace events for hw/sd/ directory Daniel P. Berrange
2016-06-16  8:40 ` [Qemu-devel] [PATCH v2 23/40] trace: split out trace events for hw/isa/ directory Daniel P. Berrange
2016-06-16  8:40 ` [Qemu-devel] [PATCH v2 24/40] trace: split out trace events for hw/i386/ directory Daniel P. Berrange
2016-06-16  8:40 ` [Qemu-devel] [PATCH v2 25/40] trace: split out trace events for hw/9pfs/ directory Daniel P. Berrange
2016-06-16  8:40 ` [Qemu-devel] [PATCH v2 26/40] trace: split out trace events for hw/ppc/ directory Daniel P. Berrange
2016-06-16  9:49   ` Thomas Huth
2016-06-16  8:40 ` [Qemu-devel] [PATCH v2 27/40] trace: split out trace events for hw/pci/ directory Daniel P. Berrange
2016-06-16  8:40 ` [Qemu-devel] [PATCH v2 28/40] trace: split out trace events for hw/s390x/ directory Daniel P. Berrange
2016-06-16  9:57   ` Cornelia Huck
2016-06-16  8:40 ` [Qemu-devel] [PATCH v2 29/40] trace: split out trace events for hw/vfio/ directory Daniel P. Berrange
2016-06-16  8:40 ` [Qemu-devel] [PATCH v2 30/40] trace: split out trace events for hw/acpi/ directory Daniel P. Berrange
2016-06-16  8:40 ` [Qemu-devel] [PATCH v2 31/40] trace: split out trace events for hw/arm/ directory Daniel P. Berrange
2016-06-16  8:40 ` [Qemu-devel] [PATCH v2 32/40] trace: split out trace events for hw/alpha/ directory Daniel P. Berrange
2016-06-16  8:40 ` [Qemu-devel] [PATCH v2 33/40] trace: split out trace events for ui/ directory Daniel P. Berrange
2016-06-16  8:40 ` [Qemu-devel] [PATCH v2 34/40] trace: split out trace events for audio/ directory Daniel P. Berrange
2016-06-16  8:40 ` [Qemu-devel] [PATCH v2 35/40] trace: split out trace events for net/ directory Daniel P. Berrange
2016-06-16  8:40 ` [Qemu-devel] [PATCH v2 36/40] trace: split out trace events for target-sparc/ directory Daniel P. Berrange
2016-06-16  8:40 ` [Qemu-devel] [PATCH v2 37/40] trace: split out trace events for target-s390x/ directory Daniel P. Berrange
2016-06-16  9:58   ` Cornelia Huck
2016-06-17 13:29     ` Stefan Hajnoczi
2016-06-16  8:40 ` [Qemu-devel] [PATCH v2 38/40] trace: split out trace events for target-ppc/ directory Daniel P. Berrange
2016-06-16  9:51   ` Thomas Huth
2016-06-16  8:40 ` [Qemu-devel] [PATCH v2 39/40] trace: split out trace events for qom/ directory Daniel P. Berrange
2016-06-16  8:40 ` [Qemu-devel] [PATCH v2 40/40] trace: split out trace events for linux-user/ directory Daniel P. Berrange
2016-06-16 12:51   ` Laurent Vivier
2016-06-16 13:00 ` [Qemu-devel] [PATCH v2 00/40] Split up the trace-events file Peter Maydell
2016-06-16 13:07   ` Daniel P. Berrange
2016-06-17 13:30 ` Stefan Hajnoczi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1466066426-16657-15-git-send-email-berrange@redhat.com \
    --to=berrange@redhat.com \
    --cc=eblake@redhat.com \
    --cc=kraxel@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    --cc=stefanha@redhat.com \
    --cc=vilanova@ac.upc.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.