From: Yoshinori Sato <ysato@users.sourceforge.jp>
To: devicetree@vger.kernel.org, linux-sh@kernel.org,
linux-kernel@vger.kernel.org
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Subject: [PATCH v3 13/19] sh: SH7751 core dtsi
Date: Tue, 28 Jun 2016 15:36:29 +0900 [thread overview]
Message-ID: <1467095795-5082-14-git-send-email-ysato@users.sourceforge.jp> (raw)
In-Reply-To: <1467095795-5082-1-git-send-email-ysato@users.sourceforge.jp>
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
---
arch/sh/boot/dts/sh7751.dtsi | 85 ++++++++++++++++++++++
include/dt-bindings/clock/renesas-sh7750.h | 26 +++++++
include/dt-bindings/interrupt-controller/sh_intc.h | 2 +
3 files changed, 113 insertions(+)
create mode 100644 arch/sh/boot/dts/sh7751.dtsi
create mode 100644 include/dt-bindings/clock/renesas-sh7750.h
create mode 100644 include/dt-bindings/interrupt-controller/sh_intc.h
diff --git a/arch/sh/boot/dts/sh7751.dtsi b/arch/sh/boot/dts/sh7751.dtsi
new file mode 100644
index 0000000..07179b2
--- /dev/null
+++ b/arch/sh/boot/dts/sh7751.dtsi
@@ -0,0 +1,85 @@
+/*
+ * Device Tree Source for the SH7751
+ *
+ * Copyright (C) 2016 Yoshinori Sato
+ */
+
+#include <dt-bindings/interrupt-controller/sh_intc.h>
+#include <dt-bindings/clock/renesas-sh7750.h>
+
+/ {
+ oclk: oscillator {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ };
+ cpg: cpg@ffc00000 {
+ compatible = "renesas,sh7750-cpg";
+ clocks = <&oclk>;
+ #clock-cells = <1>;
+ renesas,mult = <12>;
+ reg = <0xffc00000 32>, <0xfe0a0000 16>;
+ };
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu@0 {
+ compatible = "renesas,sh4", "renesas,sh";
+ clock-frequency = <266666666>;
+ };
+ };
+ shintc: interrupt-controller@ffd00000 {
+ compatible = "renesas,sh7751-intc";
+ #interrupt-cells = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-controller;
+ reg = <0xffd00000 14>, <0xfe080000 128>;
+
+ };
+ sci0: serial@ffe00000 {
+ compatible = "renesas,sci";
+ reg = <0xffe00000 0x20>;
+ interrupts = <evt2irq(0x4e0) 0
+ evt2irq(0x500) 0
+ evt2irq(0x540) 0
+ evt2irq(0x520) 0>;
+ clocks = <&cpg SH7750_CLK_SCI>;
+ clock-names = "fck";
+ status = "disabled";
+ };
+ sci1: serial@ffe80000 {
+ compatible = "renesas,scif";
+ reg = <0xffe80000 0x100>;
+ interrupts = <evt2irq(0x700) 0
+ evt2irq(0x720) 0
+ evt2irq(0x760) 0
+ evt2irq(0x740) 0>;
+ clocks = <&cpg SH7750_CLK_SCIF>;
+ clock-names = "fck";
+ status = "disabled";
+ };
+ tmu: timer@ffd80000 {
+ compatible = "renesas,tmu";
+ reg = <0xffd80000 12>;
+ interrupts = <evt2irq(0x400) 0
+ evt2irq(0x420) 0
+ evt2irq(0x440) 0>;
+ clocks = <&cpg SH7750_CLK_TMU0>;
+ clock-names = "fck";
+ renesas,channels-mask = <0x03>;
+ };
+ pci: pci-controller@fe200000 {
+ compatible = "renesas,sh7751-pci";
+ device_type = "pci";
+ bus-range = <0 0>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0x02000000 0x00000000 0xfd000000 0xfd000000 0x00000000 0x01000000>,
+ <0x01000000 0x00000000 0xfe240000 0x00000000 0x00000000 0x00040000>;
+ reg = <0xfe200000 0x0400>, <0xff800000 0x0030>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0x1800 0 7>;
+ status = "disabled";
+ };
+};
\ No newline at end of file
diff --git a/include/dt-bindings/clock/renesas-sh7750.h b/include/dt-bindings/clock/renesas-sh7750.h
new file mode 100644
index 0000000..546c0b1
--- /dev/null
+++ b/include/dt-bindings/clock/renesas-sh7750.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright (C) 2016 Yoshinori Sato
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef __DT_BINDINGS_CLOCK_RENESAS_SH7750_H__
+#define __DT_BINDINGS_CLOCK_RENESAS_SH7750_H__
+
+#define SH7750_CLK_SCI 0
+#define SH7750_CLK_RTC 1
+#define SH7750_CLK_TMU0 2
+#define SH7750_CLK_TMU1 3
+#define SH7750_CLK_TMU2 4
+#define SH7750_CLK_SCIF 5
+#define SH7750_CLK_DMAC 6
+#define SH7750_CLK_UBC 7
+#define SH7750_CLK_SQ 8
+#define SH7750_CLK_INTC 9
+#define SH7750_CLK_TMU3 10
+#define SH7750_CLK_TMU4 11
+#define SH7750_CLK_PCIC 12
+
+#endif /* __DT_BINDINGS_CLOCK_RENESAS_CPG_MSSR_H__ */
diff --git a/include/dt-bindings/interrupt-controller/sh_intc.h b/include/dt-bindings/interrupt-controller/sh_intc.h
new file mode 100644
index 0000000..8c9dcdc
--- /dev/null
+++ b/include/dt-bindings/interrupt-controller/sh_intc.h
@@ -0,0 +1,2 @@
+#define evt2irq(evt) (((evt) >> 5) - 16)
+#define irq2evt(irq) (((irq) + 16) << 5)
--
2.7.0
next prev parent reply other threads:[~2016-06-28 6:36 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-28 6:36 [PATCH v3 00/19] sh: LANDISK and R2Dplus convert to device tree Yoshinori Sato
2016-06-28 6:36 ` [PATCH v3 01/19] sh: More early unflatten " Yoshinori Sato
2016-06-28 6:36 ` [PATCH v3 02/19] sh: set preset_lpj Yoshinori Sato
2016-06-28 6:36 ` [PATCH v3 03/19] sh: Use P1SEGADDR Yoshinori Sato
2016-06-28 6:36 ` [PATCH v3 04/19] sh: command line passing chosen/bootargs in devicetree Yoshinori Sato
2016-06-28 6:36 ` [PATCH v3 05/19] sh: FDT address save before bank change Yoshinori Sato
2016-06-28 6:36 ` [PATCH v3 06/19] sh: Passing FDT address on zImage Yoshinori Sato
2016-06-28 6:36 ` [PATCH v3 07/19] sh: Disable board specific code on device tree mode Yoshinori Sato
2016-06-28 6:36 ` [PATCH v3 08/19] sh: Use GENERIC_IOMAP " Yoshinori Sato
2016-06-28 6:36 ` [PATCH v3 09/19] sh: Add board specific initialize of of-generic Yoshinori Sato
2016-06-28 6:36 ` [PATCH v3 10/19] sh: SH7750/51 CPG Driver Yoshinori Sato
2016-06-28 21:02 ` Rob Herring
2016-06-28 6:36 ` [PATCH v3 11/19] sh: Add PCI host bridge driver for SH7751 Yoshinori Sato
2016-06-28 21:05 ` Rob Herring
2016-06-28 6:36 ` [PATCH v3 12/19] sh: irqchip: SH7751 IRQCHIP Driver Yoshinori Sato
2016-06-28 6:36 ` Yoshinori Sato
2016-06-28 7:55 ` Geert Uytterhoeven
2016-06-28 7:55 ` Geert Uytterhoeven
2016-06-28 6:36 ` Yoshinori Sato [this message]
2016-06-28 6:36 ` [PATCH v3 14/19] sh: Move common PCI stuff to arch/sh/kernel Yoshinori Sato
2016-06-28 6:36 ` Yoshinori Sato
2016-06-28 6:36 ` [PATCH v3 15/19] pci: pci_config_window move to linux/pci.h Yoshinori Sato
2016-06-28 6:36 ` Yoshinori Sato
2016-06-28 6:36 ` [PATCH v3 16/19] pci: PCI_HOST_GENERIC enable for SH Yoshinori Sato
2016-06-28 6:36 ` [PATCH v3 17/19] sh: Add separate DTB build rule Yoshinori Sato
2016-06-28 6:36 ` Yoshinori Sato
2016-06-28 6:36 ` [PATCH v3 18/19] sh: IO-DATA HDL-U (a,k.a landisk) support Yoshinori Sato
2016-06-28 6:36 ` Yoshinori Sato
2016-06-28 7:51 ` Geert Uytterhoeven
2016-06-28 7:51 ` Geert Uytterhoeven
2016-06-28 15:06 ` Yoshinori Sato
2016-06-28 15:06 ` Yoshinori Sato
2016-06-28 8:54 ` John Paul Adrian Glaubitz
2016-06-28 8:54 ` John Paul Adrian Glaubitz
2016-06-28 6:36 ` [PATCH v3 19/19] sh: Renesas R0P751RLC0011RL (a.k.a R2Dplus) support Yoshinori Sato
2016-06-28 6:36 ` Yoshinori Sato
2016-06-28 7:54 ` Geert Uytterhoeven
2016-06-28 7:54 ` Geert Uytterhoeven
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1467095795-5082-14-git-send-email-ysato@users.sourceforge.jp \
--to=ysato@users.sourceforge.jp \
--cc=devicetree@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.