From: James Bottomley <James.Bottomley@HansenPartnership.com>
To: Andrew Morton <akpm@linux-foundation.org>,
Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-scsi <linux-scsi@vger.kernel.org>,
linux-kernel <linux-kernel@vger.kernel.org>
Subject: [GIT PULL] first round of SCSI updates for the 4.7+ merge window
Date: Wed, 27 Jul 2016 07:56:58 -0400 [thread overview]
Message-ID: <1469620618.27356.15.camel@HansenPartnership.com> (raw)
This update includes the usual round of driver updates (fcoe, lpfc,
ufs, qla2xxx, hisi_sas). The most important other change is removing
the flag to allow non-blk_mq on a per host basis (it's unused); there
is still a global module parameter for all of SCSI just in case. The
rest are an assortment of minor fixes and typo updates.
The patch is available here:
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-misc
The short changelog is:
Arnd Bergmann (3):
scsi: lpfc: avoid harmless comparison warning
scsi: wd7000: print sector number as 64-bit
scsi: libfc: fix seconds_since_last_reset calculation
Cathy Avery (1):
scsi: storvsc: Filter out storvsc messages CD-ROM medium not present
Chris Leech (1):
libfc: sanity check cpu number extracted from xid
Christoph Hellwig (2):
scsi: remove the disable_blk_mq host flag
scsi: remove current_cmnd field from struct scsi_device
Colin Ian King (1):
bnx2i: fix spelling mistake "complection" -> "completion"
Dan Carpenter (2):
fnic: pci_dma_mapping_error() doesn't return an error code
ibmvfc: prevent a potential deadlock
Dave Carroll (1):
MAINTAINERS: Update email address for aacraid
Don Brace (2):
hpsa: change hpsa_passthru_ioctl timeout
hpsa: correct skipping masked peripherals
Douglas Gilbert (1):
scsi_debug: fix sleep in invalid context
Geert Uytterhoeven (1):
MAINTAINERS: Add file patterns for scsi device tree bindings
Giridhar Malavali (1):
qla2xxx: Set FLOGI retry in additional firmware options for P2P (N2N) mode.
Hannes Reinecke (7):
fcoe: implement FIP VLAN responder
fcoe: Rename 'fip_frame' to 'fip_vn2vn_notify_frame'
fcoe: Update multicast addresses on FIP mode change
fcoe: fcoe->realdev is always set
fcoe: use enum for fip_mode
fc_fip: Update to latest FC-BB-6 draft
libfc: Update rport reference counting
Hans de Goede (1):
usb: MAINTAINERS: Oliver Neukum is the new uas maintainer
Helge Deller (1):
53c700: Use proper debug printk format specifiers
Himanshu Madhani (1):
qla2xxx: Update driver version to 8.07.00.38-k
James Smart (21):
lpfc: Update lpfc version to 11.2.0.0
lpfc: Copyright updates
lpfc: Disable FDMI probing if not connected to a fabric
lpfc: Correct issue with ioremap() call on 32bit kernel
lpfc: Re-organize source for easier driver attribute management
lpfc: Remove global lpfc_sli_mode attribute in leiu of per-hba lpfc_sli_mode
lpfc: Remove global lpfc_delay_discovery attribute in leiu of per-hba lpfc_delay_discovery
lpfc: Remove global lpfc_enable_npiv attribute in leiu of per-hba lpfc_enable_npiv
lpfc: Correct Port reset resulting in FC port going offline
lpfc: Add support for XLane LUN priority
lpfc: Correct RDP response Revision location
lpfc: Re-organize source for easier device-id management
lpfc: Correct FCOE discovery to avoid loss of storage devices after system reboot
lpfc: Fix SLI mode 2 config failure
lpfc: Add MDS Diagnostics Support
lpfc: Add sysfs proc_name support
lpfc: Reject RDP ELS if port has no login
lpfc: Correct Buffer credit descriptor values in RDP response
lpfc: Add recovery from adapter parity errors on some SLI4 adapters
lpfc: Correct RDP response sizing issue
lpfc: Fix Transgression Flag of Optical Element descriptor for RDP on Linux
Jim Gill (1):
vmw_pvscsi: Change to update maintainer details (name, email)
Joao Pinto (10):
ufs: Adding license info do tc-dwc-g210 and ufshcd-dwc to enable loadable module
ufs: add TC G210 pci driver
ufs: add TC G210 platform driver
ufs: add support for Synopsys G210 Test Chip
ufs: add support for DesignWare Controller
ufs: add link status to ufshci
ufs: add unipro attributes
ufs: add UFS 2.0 capabilities
ufs: add UFS 2.0 to ufshcd-pltfrm bindings
ufs: fixed typo in ufshcd-pltfrm
Joe Carnuccio (12):
qla2xxx: Separate ISP type bits out from device type.
qla2xxx: Correction to function qla26xx_dport_diagnostics().
qla2xxx: Add support to handle Loop Init error Asynchronus event.
qla2xxx: Let DPORT be enabled purely by nvram.
qla2xxx: Add bsg interface to support D_Port Diagnostics.
qla2xxx: Properly reset firmware statistics.
qla2xxx: Properly initialize IO statistics.
qla2xxx: Make debug buffer log easier to view.
qla2xxx: Add module parameter alternate/short names.
qla2xxx: Shutdown board on thermal shutdown aen.
qla2xxx: Add ram area DDR for fwdump template entry T262.
qla2xxx: Remove sysfs node fw_dump_template.
Joe Lawrence (2):
mpt3sas: avoid mpt3sas_transport_port_add NULL parent_dev
mpt3sas: set num_phys after allocating phy[] space
Johannes Thumshirn (5):
lpfc: call lpfc_sli_validate_fcp_iocb() with the hbalock held
qla2xxx: setup data needed in ISR before setting up the ISR
fcoe: use defines from ethtool for 20Gbit and 40Gbit speeds
MAINTAINERS: Change FCoE maintainer
snic: Fix use-after-free in case of a dma mapping error
John Garry (3):
hisi_sas: update driver version to 1.5
hisi_sas: fix the inconsistent lock issue reported by CONFIG_PROVE_LOCKING
hisi_sas: add v2 hw ACPI support
Julia Lawall (2):
pm8001: fix typo
snic: fix typo
Kefeng Wang (1):
mpt3sas: Fix panic when aer correct error occurred
Manjunath M B (1):
scsi: ufs: tc-dwc-g210 driver fix for 20-bit RMMI
Manoj N. Kumar (1):
cxlflash: Fix to drain operations from previous reset
Maurizio Lombardi (1):
bnx2fc: replace printk() with BNX2FC_IO_DBG()
Muhammad Falak R Wani (1):
aacraid: use kmemdup
Randy Dunlap (1):
scsi: ultrastor.c depends on ISA_DMA_API
Sawan Chandak (5):
qla2xxx: Fix BBCR offset
qla2xxx: Fix duplicate message id.
qla2xxx: Disable the adapter and skip error recovery in case of register disconnect.
qla2xxx: Add bsg interface to support statistics counter reset.
qla2xxx: Check for device state before unloading the driver.
Sebastian Andrzej Siewior (1):
fcoe: convert to kworker
Sumit Saxena (1):
megaraid_sas: Do not fire MR_DCMD_PD_LIST_QUERY to controllers which do not support it
Tiezhu Yang (1):
scsi: ufs: remove unnecessary goto label
Uma Krishnan (2):
cxlflash: Shutdown notify support for CXL Flash cards
cxlflash: Add device dependent flags
Wei Fang (1):
scsi:libsas: fix oops caused by assigning a freed task to ->lldd_task
Wen Xiong (2):
ipr: Increase MSIX vectors number
ipr: Add new CCIN for new adapters support
And the diffstat:
.../devicetree/bindings/ufs/tc-dwc-g210-pltfrm.txt | 26 ++
.../devicetree/bindings/ufs/ufshcd-pltfrm.txt | 4 +-
MAINTAINERS | 16 +-
drivers/scsi/53c700.c | 10 +-
drivers/scsi/53c700.h | 15 +-
drivers/scsi/Kconfig | 2 +-
drivers/scsi/aacraid/commctrl.c | 7 +-
drivers/scsi/bnx2fc/bnx2fc_fcoe.c | 14 +-
drivers/scsi/bnx2fc/bnx2fc_io.c | 2 +-
drivers/scsi/bnx2i/bnx2i_hwi.c | 2 +-
drivers/scsi/cxlflash/main.c | 98 ++++++-
drivers/scsi/cxlflash/main.h | 2 +
drivers/scsi/cxlflash/sislite.h | 6 +
drivers/scsi/fcoe/fcoe.c | 322 ++++-----------------
drivers/scsi/fcoe/fcoe_ctlr.c | 245 +++++++++++++++-
drivers/scsi/fcoe/fcoe_sysfs.c | 39 +++
drivers/scsi/fcoe/fcoe_transport.c | 4 +-
drivers/scsi/fnic/fnic_fcs.c | 14 +-
drivers/scsi/fnic/fnic_fip.h | 8 -
drivers/scsi/hisi_sas/hisi_sas.h | 2 +-
drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 73 +++--
drivers/scsi/hosts.c | 2 -
drivers/scsi/hpsa.c | 83 +++++-
drivers/scsi/ibmvscsi/ibmvfc.c | 2 +
drivers/scsi/ipr.c | 11 +-
drivers/scsi/ipr.h | 3 +
drivers/scsi/libfc/fc_exch.c | 10 +-
drivers/scsi/libfc/fc_lport.c | 24 +-
drivers/scsi/libfc/fc_rport.c | 49 ++--
drivers/scsi/libsas/sas_ata.c | 1 +
drivers/scsi/lpfc/lpfc.h | 27 +-
drivers/scsi/lpfc/lpfc_attr.c | 237 +++++++--------
drivers/scsi/lpfc/lpfc_attr.h | 116 ++++++++
drivers/scsi/lpfc/lpfc_crtn.h | 7 +-
drivers/scsi/lpfc/lpfc_ct.c | 4 +
drivers/scsi/lpfc/lpfc_els.c | 290 ++++++++++++-------
drivers/scsi/lpfc/lpfc_hw.h | 36 +--
drivers/scsi/lpfc/lpfc_hw4.h | 41 ++-
drivers/scsi/lpfc/lpfc_ids.h | 122 ++++++++
drivers/scsi/lpfc/lpfc_init.c | 277 +++++++++---------
drivers/scsi/lpfc/lpfc_scsi.c | 14 +-
drivers/scsi/lpfc/lpfc_scsi.h | 3 +-
drivers/scsi/lpfc/lpfc_sli.c | 101 ++++++-
drivers/scsi/lpfc/lpfc_sli.h | 3 +-
drivers/scsi/lpfc/lpfc_sli4.h | 4 +-
drivers/scsi/lpfc/lpfc_version.h | 2 +-
drivers/scsi/megaraid/megaraid_sas_base.c | 6 +
drivers/scsi/mpt3sas/mpt3sas_scsih.c | 27 +-
drivers/scsi/mpt3sas/mpt3sas_transport.c | 5 +
drivers/scsi/pm8001/pm8001_init.c | 2 +-
drivers/scsi/qla2xxx/qla_attr.c | 170 ++++-------
drivers/scsi/qla2xxx/qla_bsg.c | 93 ++++--
drivers/scsi/qla2xxx/qla_bsg.h | 13 +
drivers/scsi/qla2xxx/qla_dbg.c | 50 ++--
drivers/scsi/qla2xxx/qla_def.h | 12 +-
drivers/scsi/qla2xxx/qla_fw.h | 2 +-
drivers/scsi/qla2xxx/qla_gbl.h | 5 +-
drivers/scsi/qla2xxx/qla_init.c | 39 ++-
drivers/scsi/qla2xxx/qla_isr.c | 31 +-
drivers/scsi/qla2xxx/qla_mbx.c | 123 ++++++--
drivers/scsi/qla2xxx/qla_os.c | 127 ++++++--
drivers/scsi/qla2xxx/qla_target.c | 16 +-
drivers/scsi/qla2xxx/qla_tmpl.c | 9 +-
drivers/scsi/qla2xxx/qla_version.h | 2 +-
drivers/scsi/scsi.c | 1 +
drivers/scsi/scsi_debug.c | 93 ++++--
drivers/scsi/snic/snic_disc.c | 4 +-
drivers/scsi/snic/snic_fwint.h | 2 +-
drivers/scsi/storvsc_drv.c | 2 +
drivers/scsi/ufs/Kconfig | 16 +
drivers/scsi/ufs/Makefile | 2 +
drivers/scsi/ufs/tc-dwc-g210-pci.c | 181 ++++++++++++
drivers/scsi/ufs/tc-dwc-g210-pltfrm.c | 113 ++++++++
drivers/scsi/ufs/tc-dwc-g210.c | 319 ++++++++++++++++++++
drivers/scsi/ufs/tc-dwc-g210.h | 19 ++
drivers/scsi/ufs/ufshcd-dwc.c | 154 ++++++++++
drivers/scsi/ufs/ufshcd-dwc.h | 26 ++
drivers/scsi/ufs/ufshcd-pltfrm.c | 2 +-
drivers/scsi/ufs/ufshcd.c | 92 +++---
drivers/scsi/ufs/ufshcd.h | 7 +
drivers/scsi/ufs/ufshci-dwc.h | 36 +++
drivers/scsi/ufs/ufshci.h | 11 +
drivers/scsi/ufs/unipro.h | 39 +++
drivers/scsi/vmw_pvscsi.c | 2 +-
drivers/scsi/vmw_pvscsi.h | 2 +-
drivers/scsi/wd7000.c | 6 +-
include/scsi/fc/fc_fip.h | 21 +-
include/scsi/libfc.h | 1 +
include/scsi/libfcoe.h | 25 +-
include/scsi/scsi_device.h | 1 -
include/scsi/scsi_host.h | 6 +-
91 files changed, 3098 insertions(+), 1197 deletions(-)
create mode 100644 Documentation/devicetree/bindings/ufs/tc-dwc-g210-pltfrm.txt
create mode 100644 drivers/scsi/lpfc/lpfc_attr.h
create mode 100644 drivers/scsi/lpfc/lpfc_ids.h
create mode 100644 drivers/scsi/ufs/tc-dwc-g210-pci.c
create mode 100644 drivers/scsi/ufs/tc-dwc-g210-pltfrm.c
create mode 100644 drivers/scsi/ufs/tc-dwc-g210.c
create mode 100644 drivers/scsi/ufs/tc-dwc-g210.h
create mode 100644 drivers/scsi/ufs/ufshcd-dwc.c
create mode 100644 drivers/scsi/ufs/ufshcd-dwc.h
create mode 100644 drivers/scsi/ufs/ufshci-dwc.h
James
next reply other threads:[~2016-07-27 11:56 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-27 11:56 James Bottomley [this message]
-- strict thread matches above, loose matches on Subject: below --
2016-08-05 23:21 [GIT PULL] first round of SCSI updates for the 4.7+ merge window James Bottomley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1469620618.27356.15.camel@HansenPartnership.com \
--to=james.bottomley@hansenpartnership.com \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.