[PATCH dev-4.7 2/2] net/faraday: Clear stale interrupts

[Gavin Shan <gwshan@linux.vnet.ibm.com>]

There is stale interrupt (PHYSTS_CHG in ISR, bit#6 in 0x0) from
the bootloader (uboot) when enabling the MAC. The stale interrupts
aren't part of kernel and should be cleared.

This clears the stale interrupts in ISR (0x0) when enabling the MAC.

Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
---
 drivers/net/ethernet/faraday/ftgmac100.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c
index f00911a..fc2852f 100644
--- a/drivers/net/ethernet/faraday/ftgmac100.c
+++ b/drivers/net/ethernet/faraday/ftgmac100.c
@@ -1119,6 +1119,7 @@ static int ftgmac100_open(struct net_device *netdev)
 {
 	struct ftgmac100 *priv = netdev_priv(netdev);
 	struct phy_device *phydev = netdev->phydev;
+	unsigned int status;
 	int err;
 
 	err = ftgmac100_alloc_buffers(priv);
@@ -1145,6 +1146,10 @@ static int ftgmac100_open(struct net_device *netdev)
 	ftgmac100_init_hw(priv);
 	ftgmac100_start_hw(priv, priv->use_ncsi ? 100 : 10);
 
+	/* Clear stale interrupts */
+	status = ioread32(priv->base + FTGMAC100_OFFSET_ISR);
+	iowrite32(status, priv->base + FTGMAC100_OFFSET_ISR);
+
 	if (phydev)
 		phy_start(phydev);
 	else if (priv->use_ncsi)
-- 
2.1.0