From: Declan Doherty <declan.doherty@intel.com>
To: dev@dpdk.org
Cc: Anatoly Burakov <anatoly.burakov@intel.com>,
Declan Doherty <declan.doherty@intel.com>
Subject: [RFC 2/4] examples: add c++ example application
Date: Tue, 2 Aug 2016 21:37:47 +0100 [thread overview]
Message-ID: <1470170269-20721-3-git-send-email-declan.doherty@intel.com> (raw)
In-Reply-To: <1470170269-20721-1-git-send-email-declan.doherty@intel.com>
From: Anatoly Burakov <anatoly.burakov@intel.com>
Example application for C++ compilation
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
---
examples/Makefile | 1 +
examples/helloworld-cpp/Makefile | 51 +++++++++++++++++++++
examples/helloworld-cpp/c_code.c | 5 ++
| 6 +++
examples/helloworld-cpp/cpp_code.cpp | 89 ++++++++++++++++++++++++++++++++++++
5 files changed, 152 insertions(+)
create mode 100644 examples/helloworld-cpp/Makefile
create mode 100644 examples/helloworld-cpp/c_code.c
create mode 100644 examples/helloworld-cpp/c_header.h
create mode 100644 examples/helloworld-cpp/cpp_code.cpp
diff --git a/examples/Makefile b/examples/Makefile
index 18b41b9..cb81c6c 100644
--- a/examples/Makefile
+++ b/examples/Makefile
@@ -46,6 +46,7 @@ endif
DIRS-y += ethtool
DIRS-y += exception_path
DIRS-y += helloworld
+DIRS-y += helloworld-cpp
DIRS-$(CONFIG_RTE_LIBRTE_PIPELINE) += ip_pipeline
ifeq ($(CONFIG_RTE_LIBRTE_LPM),y)
DIRS-$(CONFIG_RTE_IP_FRAG) += ip_reassembly
diff --git a/examples/helloworld-cpp/Makefile b/examples/helloworld-cpp/Makefile
new file mode 100644
index 0000000..f8f281c
--- /dev/null
+++ b/examples/helloworld-cpp/Makefile
@@ -0,0 +1,51 @@
+# BSD LICENSE
+#
+# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+ifeq ($(RTE_SDK),)
+$(error "Please define RTE_SDK environment variable")
+endif
+
+# Default target, can be overriden by command line or environment
+RTE_TARGET ?= x86_64-native-linuxapp-gcc
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# binary name
+APP = helloworld-cpp
+
+# all source are stored in SRCS-y
+SRCS-y := c_code.c cpp_code.cpp
+
+CFLAGS += -O3
+CFLAGS += $(WERROR_FLAGS)
+LDFLAGS += -lstdc++
+
+include $(RTE_SDK)/mk/rte.extapp.mk
diff --git a/examples/helloworld-cpp/c_code.c b/examples/helloworld-cpp/c_code.c
new file mode 100644
index 0000000..d349a3b
--- /dev/null
+++ b/examples/helloworld-cpp/c_code.c
@@ -0,0 +1,5 @@
+#include "c_header.h"
+
+int func(void) {
+ return 100500;
+}
--git a/examples/helloworld-cpp/c_header.h b/examples/helloworld-cpp/c_header.h
new file mode 100644
index 0000000..3668b60
--- /dev/null
+++ b/examples/helloworld-cpp/c_header.h
@@ -0,0 +1,6 @@
+#ifndef HEADER_H
+#define HEADER_H
+
+int func(void);
+
+#endif
diff --git a/examples/helloworld-cpp/cpp_code.cpp b/examples/helloworld-cpp/cpp_code.cpp
new file mode 100644
index 0000000..6919048
--- /dev/null
+++ b/examples/helloworld-cpp/cpp_code.cpp
@@ -0,0 +1,89 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdio.h>
+#include <string.h>
+#include <stdint.h>
+#include <errno.h>
+#include <sys/queue.h>
+
+#include <rte_memory.h>
+#include <rte_memzone.h>
+#include <rte_launch.h>
+#include <rte_eal.h>
+#include <rte_per_lcore.h>
+#include <rte_lcore.h>
+#include <rte_debug.h>
+
+#include <iostream>
+
+extern "C" {
+#include "c_header.h"
+};
+
+using namespace std;
+
+static int
+lcore_hello(__attribute__((unused)) void *arg)
+{
+ unsigned lcore_id;
+ lcore_id = rte_lcore_id();
+ printf("hello from core %u\n", lcore_id);
+ return 0;
+}
+
+int
+main(int argc, char **argv)
+{
+ int ret;
+ unsigned lcore_id;
+
+ cout << "Hellow world from C++" << endl;
+
+ cout << "Output from C code: " << func() << endl;
+
+ ret = rte_eal_init(argc, argv);
+ if (ret < 0)
+ rte_panic("Cannot init EAL\n");
+
+ /* call lcore_hello() on every slave lcore */
+ RTE_LCORE_FOREACH_SLAVE(lcore_id) {
+ rte_eal_remote_launch(lcore_hello, NULL, lcore_id);
+ }
+
+ /* call it on master lcore too */
+ lcore_hello(NULL);
+
+ rte_eal_mp_wait_lcore();
+ return 0;
+}
--
2.5.5
next prev parent reply other threads:[~2016-08-02 20:42 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-02 20:37 [RFC 0/4] Use Google Test as DPDK unit test framework Declan Doherty
2016-08-02 20:37 ` [RFC 1/4] mk: Add support for C++ compilation Declan Doherty
2016-08-02 20:37 ` Declan Doherty [this message]
2016-08-02 20:37 ` [RFC 3/4] eal: add command line option to log output to stdout Declan Doherty
2016-08-03 11:25 ` Neil Horman
2016-08-02 20:37 ` [RFC 4/4] app/test-gtest: example google test application Declan Doherty
2016-08-02 21:52 ` [RFC 0/4] Use Google Test as DPDK unit test framework Thomas Monjalon
2016-08-03 9:16 ` Remy Horton
2016-08-03 9:57 ` Doherty, Declan
2016-08-03 12:51 ` Neil Horman
2016-08-03 20:46 ` Ming Zhao(赵明)
2016-08-04 19:47 ` Jim Murphy
2016-08-04 19:55 ` Wiles, Keith
2016-08-05 7:42 ` Thomas Monjalon
2016-08-05 7:41 ` Yerden Zhumabekov
2016-08-05 9:11 ` Remy Horton
2016-08-05 12:59 ` Neil Horman
2016-08-05 14:54 ` Remy Horton
2016-08-03 11:31 ` Neil Horman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1470170269-20721-3-git-send-email-declan.doherty@intel.com \
--to=declan.doherty@intel.com \
--cc=anatoly.burakov@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.